At a glance
Standard miniature housing with M3 threaded mounting holes |
Optics with standard red LED or bright light LED |
Polarizing filter |
Light/dark switching and sensitivity adjustment via rotary switch possible |
All necessary accessories (BEF-W100-A and P250) are included with delivery (depending on type) |
Your benefits
Highly visible light spot simplifies alignment |
Less contamination due to high optical operating reserve |
Polarization filter allows reliable detection of objects with shiny surfaces and prevents false switching |
M3 threaded mounting holes provide easy installation |
Variants available for reliably detecting clear materials, min. attenuation 20 % |
All necessary accessories (bracket and reflector) are included with delivery, reducing installation and procurement costs (depending on type) |
Product will be phased out and can be ordered until 31.12.2015.
Features | |||
Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
Dimensions (W x H x D): | 11 mm x 31 mm x 20 mm | ||
Housing design (light emission): | Rectangular | ||
Sensing range max.: | 0.01 m ... 6 m 1) | ||
Диапазон измерений: | 0.01 m ... 5 m 2) | ||
Type of light: | Visible red light | ||
Источник света: | LED 3) | ||
Длина волны: | 680 nm | ||
Angle of dispersion: | Ca. 4 ° | ||
Focus adjustable: | - | ||
Light spot size (distance): | Ø 250 mm (3.5 m) |
Механика/электроника | |||
Supply voltage: | 10 V DC ... 30 V DC 1) | ||
Пульсации: | ± 10 % 2) | ||
Потребляемая мощность: | ≤ 30 mA 3) | ||
Output type: | NPN, open collector | ||
Режим переключения: | Dark switching | ||
Output current Imax.: | ≤ 100 mA | ||
Response time: | ≤ 0.5 ms 4) | ||
Частота переключений: | 1,000 Hz 5) | ||
Тип подключения: | Cable, 3-wire, 2 m 6) | ||
Материал кабеля: | PVC | ||
Сечение провода: | 0.18 mm² | ||
Защита цепи: | A, B, D 7)8)9) | ||
Вес: | 53 g | ||
Поляризационный фильтр: | |||
Special device: | - | ||
Материал оптики: | PMMA | ||
Enclosure rating: | IP 65 | ||
Ambient operating temperature: | -25 °C ... +55 °C | ||
Температура хранения: | -40 °C ... +70 °C | ||
Signal voltage NPN HIGH/LOW: | Approx. VS / | ||
Материал корпуса: | ABS/PC, Plastic |
At a glance
Standard miniature housing with M3 threaded mounting holes |
Optics with standard red LED or bright light LED |
Polarizing filter |
Light/dark switching and sensitivity adjustment via rotary switch possible |
All necessary accessories (BEF-W100-A and P250) are included with delivery (depending on type) |
Your benefits
Highly visible light spot simplifies alignment |
Less contamination due to high optical operating reserve |
Polarization filter allows reliable detection of objects with shiny surfaces and prevents false switching |
M3 threaded mounting holes provide easy installation |
Variants available for reliably detecting clear materials, min. attenuation 20 % |
All necessary accessories (bracket and reflector) are included with delivery, reducing installation and procurement costs (depending on type) |
Product will be phased out and can be ordered until 31.12.2015.
Features | |||
Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
Dimensions (W x H x D): | 11 mm x 31 mm x 20 mm | ||
Housing design (light emission): | Rectangular | ||
Sensing range max.: | 0.01 m ... 6 m 1) | ||
Диапазон измерений: | 0.01 m ... 5 m 2) | ||
Type of light: | Visible red light | ||
Источник света: | LED 3) | ||
Длина волны: | 680 nm | ||
Angle of dispersion: | Ca. 4 ° | ||
Focus adjustable: | - | ||
Light spot size (distance): | Ø 250 mm (3.5 m) |
Механика/электроника | |||
Supply voltage: | 10 V DC ... 30 V DC 1) | ||
Пульсации: | ± 10 % 2) | ||
Потребляемая мощность: | ≤ 30 mA 3) | ||
Output type: | NPN, open collector | ||
Режим переключения: | Dark switching | ||
Output current Imax.: | ≤ 100 mA | ||
Response time: | ≤ 0.5 ms 4) | ||
Частота переключений: | 1,000 Hz 5) | ||
Тип подключения: | Cable with Excon-connector, 400 mm 6) | ||
Материал кабеля: | PVC | ||
Защита цепи: | A, B, D 7)8)9) | ||
Вес: | 53 g | ||
Поляризационный фильтр: | |||
Special device: | |||
Материал оптики: | PMMA | ||
Enclosure rating: | IP 65 | ||
Ambient operating temperature: | -25 °C ... +55 °C | ||
Температура хранения: | -40 °C ... +70 °C | ||
Signal voltage NPN HIGH/LOW: | Approx. VS / | ||
Материал корпуса: | ABS/PC, Plastic |
At a glance
Standard miniature housing with M3 threaded mounting holes |
Optics with standard red LED or bright light LED |
Polarizing filter |
Light/dark switching and sensitivity adjustment via rotary switch possible |
All necessary accessories (BEF-W100-A and P250) are included with delivery (depending on type) |
Your benefits
Highly visible light spot simplifies alignment |
Less contamination due to high optical operating reserve |
Polarization filter allows reliable detection of objects with shiny surfaces and prevents false switching |
M3 threaded mounting holes provide easy installation |
Variants available for reliably detecting clear materials, min. attenuation 20 % |
All necessary accessories (bracket and reflector) are included with delivery, reducing installation and procurement costs (depending on type) |
Product will be phased out and can be ordered until 31.12.2015.
Features | |||
Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
Dimensions (W x H x D): | 11 mm x 31 mm x 20 mm | ||
Housing design (light emission): | Rectangular | ||
Sensing range max.: | 0.01 m ... 6 m 1) | ||
Диапазон измерений: | 0.01 m ... 5 m 2) | ||
Type of light: | Visible red light | ||
Источник света: | LED 3) | ||
Длина волны: | 680 nm | ||
Angle of dispersion: | Ca. 4 ° | ||
Focus adjustable: | - | ||
Light spot size (distance): | Ø 250 mm (3.5 m) |
Механика/электроника | |||
Supply voltage: | 10 V DC ... 30 V DC 1) | ||
Пульсации: | ± 10 % 2) | ||
Потребляемая мощность: | ≤ 30 mA 3) | ||
Output type: | NPN, open collector | ||
Режим переключения: | Dark switching | ||
Output current Imax.: | ≤ 100 mA | ||
Response time: | ≤ 0.5 ms 4) | ||
Частота переключений: | 1,000 Hz 5) | ||
Тип подключения: | Cable with Excon-connector, 600 mm 6) | ||
Материал кабеля: | PVC | ||
Защита цепи: | A, B, D 7)8)9) | ||
Вес: | 53 g | ||
Поляризационный фильтр: | |||
Special device: | |||
Материал оптики: | PMMA | ||
Enclosure rating: | IP 65 | ||
Ambient operating temperature: | -25 °C ... +55 °C | ||
Температура хранения: | -40 °C ... +70 °C | ||
Signal voltage NPN HIGH/LOW: | Approx. VS / | ||
Материал корпуса: | ABS/PC, Plastic |
At a glance
Standard miniature housing with M3 threaded mounting holes |
Optics with standard red LED or bright light LED |
Polarizing filter |
Light/dark switching and sensitivity adjustment via rotary switch possible |
All necessary accessories (BEF-W100-A and P250) are included with delivery (depending on type) |
Your benefits
Highly visible light spot simplifies alignment |
Less contamination due to high optical operating reserve |
Polarization filter allows reliable detection of objects with shiny surfaces and prevents false switching |
M3 threaded mounting holes provide easy installation |
Variants available for reliably detecting clear materials, min. attenuation 20 % |
All necessary accessories (bracket and reflector) are included with delivery, reducing installation and procurement costs (depending on type) |
Product will be phased out and can be ordered until 31.12.2015.
Features | |||
Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
Dimensions (W x H x D): | 11 mm x 31 mm x 20 mm | ||
Housing design (light emission): | Rectangular | ||
Sensing range max.: | 0.01 m ... 6 m 1) | ||
Диапазон измерений: | 0.01 m ... 5 m 2) | ||
Type of light: | Visible red light | ||
Источник света: | LED 3) | ||
Длина волны: | 680 nm | ||
Angle of dispersion: | Ca. 4 ° | ||
Focus adjustable: | - | ||
Light spot size (distance): | Ø 250 mm (3.5 m) |
Механика/электроника | |||
Supply voltage: | 10 V DC ... 30 V DC 1) | ||
Пульсации: | ± 10 % 2) | ||
Потребляемая мощность: | ≤ 30 mA 3) | ||
Output type: | NPN, open collector | ||
Режим переключения: | Dark switching | ||
Output current Imax.: | 100 | ||
Response time: | ≤ 0.5 ms 4) | ||
Частота переключений: | 1,000 5) | ||
Тип подключения: | Cable, 3-wire, 2 m 6) | ||
Материал кабеля: | PVC | ||
Сечение провода: | 0.18 mm² | ||
Защита цепи: | A, B, D 7)8)9) | ||
Вес: | 53 g | ||
Поляризационный фильтр: | |||
Special device: | - | ||
Материал оптики: | PMMA | ||
Enclosure rating: | IP 65 | ||
Items supplied: | Stainless steel mounting bracket (1.4301/304) BEF-W100-A, Reflector P250 | ||
Ambient operating temperature: | -25 °C ... +55 °C | ||
Температура хранения: | -40 °C ... +70 °C | ||
Signal voltage NPN HIGH/LOW: | Approx. VS / | ||
Материал корпуса: | ABS/PC, Plastic |
At a glance
Standard miniature housing with M3 threaded mounting holes |
Optics with standard red LED or bright light LED |
Polarizing filter |
Light/dark switching and sensitivity adjustment via rotary switch possible |
All necessary accessories (BEF-W100-A and P250) are included with delivery (depending on type) |
Your benefits
Highly visible light spot simplifies alignment |
Less contamination due to high optical operating reserve |
Polarization filter allows reliable detection of objects with shiny surfaces and prevents false switching |
M3 threaded mounting holes provide easy installation |
Variants available for reliably detecting clear materials, min. attenuation 20 % |
All necessary accessories (bracket and reflector) are included with delivery, reducing installation and procurement costs (depending on type) |
Product will be phased out and can be ordered until 31.12.2015.
Features | |||
Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
Dimensions (W x H x D): | 11 mm x 31 mm x 20 mm | ||
Housing design (light emission): | Rectangular | ||
Sensing range max.: | 0.01 m ... 6 m 1) | ||
Диапазон измерений: | 0.01 m ... 5 m 2) | ||
Type of light: | Visible red light | ||
Источник света: | LED 3) | ||
Длина волны: | 680 nm | ||
Angle of dispersion: | Ca. 4 ° | ||
Focus adjustable: | - | ||
Light spot size (distance): | Ø 250 mm (3.5 m) |
Механика/электроника | |||
Supply voltage: | 10 V DC ... 30 V DC 1) | ||
Пульсации: | ± 10 % 2) | ||
Потребляемая мощность: | ≤ 30 mA 3) | ||
Output type: | NPN, open collector | ||
Режим переключения: | Light switching | ||
Output current Imax.: | ≤ 100 mA | ||
Response time: | ≤ 0.5 ms 4) | ||
Частота переключений: | 1,000 Hz 5) | ||
Тип подключения: | Cable, 3-wire, 2 m 6) | ||
Материал кабеля: | PVC | ||
Сечение провода: | 0.18 mm² | ||
Защита цепи: | A, B, D 7)8)9) | ||
Вес: | 53 g | ||
Поляризационный фильтр: | |||
Special device: | - | ||
Материал оптики: | PMMA | ||
Enclosure rating: | IP 65 | ||
Ambient operating temperature: | -25 °C ... +55 °C | ||
Температура хранения: | -40 °C ... +70 °C | ||
Signal voltage NPN HIGH/LOW: | Approx. VS / | ||
Материал корпуса: | ABS/PC, Plastic |
At a glance
Standard miniature housing with M3 threaded mounting holes |
Optics with standard red LED or bright light LED |
Polarizing filter |
Light/dark switching and sensitivity adjustment via rotary switch possible |
All necessary accessories (BEF-W100-A and P250) are included with delivery (depending on type) |
Your benefits
Highly visible light spot simplifies alignment |
Less contamination due to high optical operating reserve |
Polarization filter allows reliable detection of objects with shiny surfaces and prevents false switching |
M3 threaded mounting holes provide easy installation |
Variants available for reliably detecting clear materials, min. attenuation 20 % |
All necessary accessories (bracket and reflector) are included with delivery, reducing installation and procurement costs (depending on type) |
Product will be phased out and can be ordered until 31.12.2015.
Features | |||
Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
Dimensions (W x H x D): | 11 mm x 31 mm x 20 mm | ||
Housing design (light emission): | Rectangular | ||
Sensing range max.: | 0.01 m ... 6 m 1) | ||
Диапазон измерений: | 0.01 m ... 5 m 2) | ||
Type of light: | Visible red light | ||
Источник света: | LED 3) | ||
Длина волны: | 680 nm | ||
Angle of dispersion: | Ca. 4 ° | ||
Focus adjustable: | - | ||
Light spot size (distance): | Ø 250 mm (3.5 m) |
Механика/электроника | |||
Supply voltage: | 10 V DC ... 30 V DC 1) | ||
Пульсации: | ± 10 % 2) | ||
Потребляемая мощность: | ≤ 30 mA 3) | ||
Output type: | NPN, open collector | ||
Режим переключения: | Light switching | ||
Output current Imax.: | 100 | ||
Response time: | ≤ 0.5 ms 4) | ||
Частота переключений: | 1,000 5) | ||
Тип подключения: | Cable, 3-wire, 2 m 6) | ||
Материал кабеля: | PVC | ||
Сечение провода: | 0.18 mm² | ||
Защита цепи: | A, B, D 7)8)9) | ||
Вес: | 53 g | ||
Поляризационный фильтр: | |||
Special device: | - | ||
Материал оптики: | PMMA | ||
Enclosure rating: | IP 65 | ||
Items supplied: | Stainless steel mounting bracket (1.4301/304) BEF-W100-A, Reflector P250 | ||
Ambient operating temperature: | -25 °C ... +55 °C | ||
Температура хранения: | -40 °C ... +70 °C | ||
Signal voltage NPN HIGH/LOW: | Approx. VS / | ||
Материал корпуса: | ABS/PC, Plastic |
At a glance
Standard miniature housing with M3 threaded mounting holes |
Optics with standard red LED or bright light LED |
Polarizing filter |
Light/dark switching and sensitivity adjustment via rotary switch possible |
All necessary accessories (BEF-W100-A and P250) are included with delivery (depending on type) |
Your benefits
Highly visible light spot simplifies alignment |
Less contamination due to high optical operating reserve |
Polarization filter allows reliable detection of objects with shiny surfaces and prevents false switching |
M3 threaded mounting holes provide easy installation |
Variants available for reliably detecting clear materials, min. attenuation 20 % |
All necessary accessories (bracket and reflector) are included with delivery, reducing installation and procurement costs (depending on type) |
Product will be phased out and can be ordered until 31.12.2015.
Features | |||
Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
Dimensions (W x H x D): | 11 mm x 31 mm x 20 mm | ||
Housing design (light emission): | Rectangular | ||
Sensing range max.: | 0.01 m ... 6 m 1) | ||
Диапазон измерений: | 0.01 m ... 5 m 2) | ||
Type of light: | Visible red light | ||
Источник света: | LED 3) | ||
Длина волны: | 680 nm | ||
Angle of dispersion: | Ca. 4 ° | ||
Focus adjustable: | - | ||
Light spot size (distance): | Ø 250 mm (3.5 m) |
Механика/электроника | |||
Supply voltage: | 10 V DC ... 30 V DC 1) | ||
Пульсации: | ± 10 % 2) | ||
Потребляемая мощность: | ≤ 30 mA 3) | ||
Output type: | NPN, open collector | ||
Режим переключения: | Light switching | ||
Output current Imax.: | ≤ 100 mA | ||
Response time: | ≤ 0.5 ms 4) | ||
Частота переключений: | 1,000 Hz 5) | ||
Тип подключения: | Cable with connector, JST, 3-pin, 1.3 m 6) | ||
Материал кабеля: | PVC | ||
Сечение провода: | 0.18 mm² | ||
Защита цепи: | A, B, D 7)8)9) | ||
Вес: | 53 g | ||
Поляризационный фильтр: | - | ||
Special device: | |||
Материал оптики: | PMMA | ||
Enclosure rating: | IP 65 | ||
Items supplied: | Mounting bracket BEF-W100-A, Reflector P250 | ||
Ambient operating temperature: | -25 °C ... +55 °C | ||
Температура хранения: | -40 °C ... +70 °C | ||
Signal voltage NPN HIGH/LOW: | Approx. VS / | ||
Материал корпуса: | ABS/PC, Plastic |
At a glance
Standard miniature housing with M3 threaded mounting holes |
Optics with standard red LED or bright light LED |
Polarizing filter |
Light/dark switching and sensitivity adjustment via rotary switch possible |
All necessary accessories (BEF-W100-A and P250) are included with delivery (depending on type) |
Your benefits
Highly visible light spot simplifies alignment |
Less contamination due to high optical operating reserve |
Polarization filter allows reliable detection of objects with shiny surfaces and prevents false switching |
M3 threaded mounting holes provide easy installation |
Variants available for reliably detecting clear materials, min. attenuation 20 % |
All necessary accessories (bracket and reflector) are included with delivery, reducing installation and procurement costs (depending on type) |
Product will be phased out and can be ordered until 31.12.2015.
Features | |||
Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
Dimensions (W x H x D): | 11 mm x 31 mm x 20 mm | ||
Housing design (light emission): | Rectangular | ||
Sensing range max.: | 0.1 m ... 7.5 m 1) | ||
Диапазон измерений: | 0.1 m ... 6 m 2) | ||
Type of light: | Visible red light | ||
Источник света: | LED 3) | ||
Длина волны: | 645 nm | ||
Angle of dispersion: | Ca. 2 ° | ||
Focus adjustable: | - | ||
Регулировки: | Potentiometer, 270 ° | ||
Light spot size (distance): | Ø 150 mm (4 m) |
Механика/электроника | |||
Supply voltage: | 10 V DC ... 30 V DC 1) | ||
Пульсации: | ± 10 % 2) | ||
Потребляемая мощность: | ≤ 30 mA 3) | ||
Output type: | NPN, open collector | ||
Режим переключения: | Светлое/темное переключение | ||
Режим переключения селектора: | Manually selectable | ||
Output current Imax.: | ≤ 100 mA | ||
Response time: | ≤ 0.5 ms 4) | ||
Частота переключений: | 1,000 Hz 5) | ||
Тип подключения: | Cable, 3-wire, 2 m 6) | ||
Материал кабеля: | PVC | ||
Сечение провода: | 0.18 mm² | ||
Защита цепи: | A, B, D 7)8)9) | ||
Вес: | 53 g | ||
Поляризационный фильтр: | |||
Special device: | - | ||
Материал оптики: | PMMA | ||
Enclosure rating: | IP 67 | ||
Ambient operating temperature: | -25 °C ... +55 °C | ||
Температура хранения: | -40 °C ... +70 °C | ||
UL File No.: | NRKH2.E300503 & NRKH8.E300503 | ||
Signal voltage NPN HIGH/LOW: | Approx. VS / | ||
Материал корпуса: | ABS/PC/POM, Plastic |
At a glance
Standard miniature housing with M3 threaded mounting holes |
Optics with standard red LED or bright light LED |
Polarizing filter |
Light/dark switching and sensitivity adjustment via rotary switch possible |
All necessary accessories (BEF-W100-A and P250) are included with delivery (depending on type) |
Your benefits
Highly visible light spot simplifies alignment |
Less contamination due to high optical operating reserve |
Polarization filter allows reliable detection of objects with shiny surfaces and prevents false switching |
M3 threaded mounting holes provide easy installation |
Variants available for reliably detecting clear materials, min. attenuation 20 % |
All necessary accessories (bracket and reflector) are included with delivery, reducing installation and procurement costs (depending on type) |
Product will be phased out and can be ordered until 31.12.2015.
Features | |||
Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
Dimensions (W x H x D): | 11 mm x 31 mm x 20 mm | ||
Housing design (light emission): | Rectangular | ||
Sensing range max.: | 0.1 m ... 7.5 m 1) | ||
Диапазон измерений: | 0.1 m ... 6 m 2) | ||
Type of light: | Visible red light | ||
Источник света: | LED 3) | ||
Длина волны: | 645 nm | ||
Angle of dispersion: | Ca. 2 ° | ||
Focus adjustable: | - | ||
Регулировки: | Potentiometer, 270 ° | ||
Light spot size (distance): | Ø 150 mm (4 m) |
Механика/электроника | |||
Supply voltage: | 10 V DC ... 30 V DC 1) | ||
Пульсации: | ± 10 % 2) | ||
Потребляемая мощность: | ≤ 30 mA 3) | ||
Output type: | NPN, open collector | ||
Режим переключения: | Светлое/темное переключение | ||
Режим переключения селектора: | Manually selectable | ||
Output current Imax.: | 100 | ||
Response time: | ≤ 0.5 ms 4) | ||
Частота переключений: | 1,000 5) | ||
Тип подключения: | Cable, 3-wire, 2 m 6) | ||
Материал кабеля: | PVC | ||
Сечение провода: | 0.18 mm² | ||
Защита цепи: | A, B, D 7)8)9) | ||
Вес: | 53 g | ||
Поляризационный фильтр: | |||
Special device: | - | ||
Материал оптики: | PMMA | ||
Enclosure rating: | IP 67 | ||
Items supplied: | Stainless steel mounting bracket (1.4301/304) BEF-W100-A, Reflector P250 | ||
Ambient operating temperature: | -25 °C ... +55 °C | ||
Температура хранения: | -40 °C ... +70 °C | ||
UL File No.: | NRKH2.E300503 & NRKH8.E300503 | ||
Signal voltage NPN HIGH/LOW: | Approx. VS / | ||
Материал корпуса: | ABS/PC/POM, Plastic |
At a glance
Standard miniature housing with M3 threaded mounting holes |
Optics with standard red LED or bright light LED |
Polarizing filter |
Light/dark switching and sensitivity adjustment via rotary switch possible |
All necessary accessories (BEF-W100-A and P250) are included with delivery (depending on type) |
Your benefits
Highly visible light spot simplifies alignment |
Less contamination due to high optical operating reserve |
Polarization filter allows reliable detection of objects with shiny surfaces and prevents false switching |
M3 threaded mounting holes provide easy installation |
Variants available for reliably detecting clear materials, min. attenuation 20 % |
All necessary accessories (bracket and reflector) are included with delivery, reducing installation and procurement costs (depending on type) |
Product will be phased out and can be ordered until 31.12.2015.
Features | |||
Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
Dimensions (W x H x D): | 11 mm x 31 mm x 20 mm | ||
Housing design (light emission): | Rectangular | ||
Sensing range max.: | 0.01 m ... 3 m 1) | ||
Диапазон измерений: | 0.01 m ... 2.6 m 2) | ||
Type of light: | Visible red light | ||
Источник света: | LED 3) | ||
Длина волны: | 680 nm | ||
Angle of dispersion: | Ca. 4 ° | ||
Focus adjustable: | - | ||
Регулировки: | Potentiometer, 270 ° | ||
Light spot size (distance): | Ø 200 mm (2 m) |
Механика/электроника | |||
Supply voltage: | 10 V DC ... 30 V DC 1) | ||
Пульсации: | ± 10 % 2) | ||
Потребляемая мощность: | ≤ 30 mA 3) | ||
Output type: | NPN, open collector | ||
Режим переключения: | Светлое/темное переключение | ||
Режим переключения селектора: | Manually selectable | ||
Output current Imax.: | ≤ 100 mA | ||
Response time: | ≤ 0.5 ms 4) | ||
Частота переключений: | 1,000 Hz 5) | ||
Attenuation along light beam: | > 20 % | ||
Тип подключения: | Cable, 3-wire, 2 m 6) | ||
Материал кабеля: | PVC | ||
Сечение провода: | 0.18 mm² | ||
Защита цепи: | A, B, D 7)8)9) | ||
Вес: | 53 g | ||
Поляризационный фильтр: | - | ||
Special device: | - | ||
Материал оптики: | PMMA | ||
Enclosure rating: | IP 65 | ||
Special feature: | Detection of transparent objects | ||
Ambient operating temperature: | -25 °C ... +55 °C | ||
Температура хранения: | -40 °C ... +70 °C | ||
Signal voltage NPN HIGH/LOW: | Approx. VS / | ||
Материал корпуса: | ABS/PC/POM, Plastic |
At a glance
Standard miniature housing with M3 threaded mounting holes |
Optics with standard red LED or bright light LED |
Polarizing filter |
Light/dark switching and sensitivity adjustment via rotary switch possible |
All necessary accessories (BEF-W100-A and P250) are included with delivery (depending on type) |
Your benefits
Highly visible light spot simplifies alignment |
Less contamination due to high optical operating reserve |
Polarization filter allows reliable detection of objects with shiny surfaces and prevents false switching |
M3 threaded mounting holes provide easy installation |
Variants available for reliably detecting clear materials, min. attenuation 20 % |
All necessary accessories (bracket and reflector) are included with delivery, reducing installation and procurement costs (depending on type) |
Product will be phased out and can be ordered until 31.12.2015.
Features | |||
Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
Dimensions (W x H x D): | 11 mm x 31 mm x 20 mm | ||
Housing design (light emission): | Rectangular | ||
Sensing range max.: | 0.01 m ... 3 m 1) | ||
Диапазон измерений: | 0.01 m ... 2.6 m 2) | ||
Type of light: | Visible red light | ||
Источник света: | LED 3) | ||
Длина волны: | 680 nm | ||
Angle of dispersion: | Ca. 4 ° | ||
Focus adjustable: | - | ||
Регулировки: | Potentiometer, 270 ° | ||
Light spot size (distance): | Ø 200 mm (2 m) |
Механика/электроника | |||
Supply voltage: | 10 V DC ... 30 V DC 1) | ||
Пульсации: | ± 10 % 2) | ||
Потребляемая мощность: | ≤ 30 mA 3) | ||
Output type: | NPN, open collector | ||
Режим переключения: | Светлое/темное переключение | ||
Режим переключения селектора: | Manually selectable | ||
Output current Imax.: | ≤ 100 mA | ||
Response time: | ≤ 0.5 ms 4) | ||
Частота переключений: | 1,000 Hz 5) | ||
Attenuation along light beam: | > 20 % | ||
Тип подключения: | Cable, 3-wire, 3 m 6) | ||
Материал кабеля: | PVC | ||
Сечение провода: | 0.18 mm² | ||
Защита цепи: | A, B, D 7)8)9) | ||
Вес: | 53 g | ||
Поляризационный фильтр: | |||
Special device: | |||
Материал оптики: | PMMA | ||
Enclosure rating: | IP 65 | ||
Special feature: | Detection of transparent objects | ||
Ambient operating temperature: | -25 °C ... +55 °C | ||
Температура хранения: | -40 °C ... +70 °C | ||
Signal voltage NPN HIGH/LOW: | Approx. VS / | ||
Материал корпуса: | ABS/PC/POM, Plastic |
At a glance
Standard miniature housing with M3 threaded mounting holes |
Optics with standard red LED or bright light LED |
Polarizing filter |
Light/dark switching and sensitivity adjustment via rotary switch possible |
All necessary accessories (BEF-W100-A and P250) are included with delivery (depending on type) |
Your benefits
Highly visible light spot simplifies alignment |
Less contamination due to high optical operating reserve |
Polarization filter allows reliable detection of objects with shiny surfaces and prevents false switching |
M3 threaded mounting holes provide easy installation |
Variants available for reliably detecting clear materials, min. attenuation 20 % |
All necessary accessories (bracket and reflector) are included with delivery, reducing installation and procurement costs (depending on type) |
Product will be phased out and can be ordered until 31.12.2015.
Features | |||
Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
Dimensions (W x H x D): | 11 mm x 31 mm x 20 mm | ||
Housing design (light emission): | Rectangular | ||
Sensing range max.: | 0.01 m ... 3 m 1) | ||
Диапазон измерений: | 0.01 m ... 2.6 m 2) | ||
Type of light: | Visible red light | ||
Источник света: | LED 3) | ||
Длина волны: | 680 nm | ||
Angle of dispersion: | Ca. 4 ° | ||
Focus adjustable: | - | ||
Регулировки: | Potentiometer, 270 ° | ||
Light spot size (distance): | Ø 200 mm (2 m) |
Механика/электроника | |||
Supply voltage: | 10 V DC ... 30 V DC 1) | ||
Пульсации: | ± 10 % 2) | ||
Потребляемая мощность: | ≤ 30 mA 3) | ||
Output type: | NPN, open collector | ||
Режим переключения: | Светлое/темное переключение | ||
Режим переключения селектора: | Manually selectable | ||
Output current Imax.: | 100 | ||
Response time: | ≤ 0.5 ms 4) | ||
Частота переключений: | 1,000 5) | ||
Attenuation along light beam: | > 20 % | ||
Тип подключения: | Cable, 3-wire, 2 m 6) | ||
Материал кабеля: | PVC | ||
Сечение провода: | 0.18 mm² | ||
Защита цепи: | A, B, D 7)8)9) | ||
Вес: | 53 g | ||
Поляризационный фильтр: | - | ||
Special device: | - | ||
Материал оптики: | PMMA | ||
Enclosure rating: | IP 65 | ||
Items supplied: | Stainless steel mounting bracket (1.4301/304) BEF-W100-A, Reflector P250 | ||
Special feature: | Detection of transparent objects | ||
Ambient operating temperature: | -25 °C ... +55 °C | ||
Температура хранения: | -40 °C ... +70 °C | ||
Signal voltage NPN HIGH/LOW: | Approx. VS / | ||
Материал корпуса: | ABS/PC/POM, Plastic |
At a glance
Standard miniature housing with M3 threaded mounting holes |
Optics with standard red LED or bright light LED |
Polarizing filter |
Light/dark switching and sensitivity adjustment via rotary switch possible |
All necessary accessories (BEF-W100-A and P250) are included with delivery (depending on type) |
Your benefits
Highly visible light spot simplifies alignment |
Less contamination due to high optical operating reserve |
Polarization filter allows reliable detection of objects with shiny surfaces and prevents false switching |
M3 threaded mounting holes provide easy installation |
Variants available for reliably detecting clear materials, min. attenuation 20 % |
All necessary accessories (bracket and reflector) are included with delivery, reducing installation and procurement costs (depending on type) |
Product will be phased out and can be ordered until 31.12.2015.
Features | |||
Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
Dimensions (W x H x D): | 11 mm x 31 mm x 20 mm | ||
Housing design (light emission): | Rectangular | ||
Sensing range max.: | 0.01 m ... 6 m 1) | ||
Диапазон измерений: | 0.01 m ... 5 m 2) | ||
Type of light: | Visible red light | ||
Источник света: | LED 3) | ||
Длина волны: | 680 nm | ||
Angle of dispersion: | Ca. 4 ° | ||
Focus adjustable: | - | ||
Регулировки: | Potentiometer, 270 ° | ||
Light spot size (distance): | Ø 250 mm (3.5 m) |
Механика/электроника | |||
Supply voltage: | 10 V DC ... 30 V DC 1) | ||
Пульсации: | ± 10 % 2) | ||
Потребляемая мощность: | ≤ 30 mA 3) | ||
Output type: | NPN, open collector | ||
Режим переключения: | Светлое/темное переключение | ||
Режим переключения селектора: | Manually selectable | ||
Output current Imax.: | ≤ 100 mA | ||
Response time: | ≤ 0.5 ms 4) | ||
Частота переключений: | 1,000 Hz 5) | ||
Тип подключения: | Cable, 3-wire, 2 m 6) | ||
Материал кабеля: | PVC | ||
Сечение провода: | 0.18 mm² | ||
Защита цепи: | A, B, D 7)8)9) | ||
Вес: | 53 g | ||
Поляризационный фильтр: | |||
Special device: | - | ||
Материал оптики: | PMMA | ||
Enclosure rating: | IP 65 | ||
Ambient operating temperature: | -25 °C ... +55 °C | ||
Температура хранения: | -40 °C ... +70 °C | ||
Signal voltage NPN HIGH/LOW: | Approx. VS / | ||
Материал корпуса: | ABS/PC/POM, Plastic |
At a glance
Standard miniature housing with M3 threaded mounting holes |
Optics with standard red LED or bright light LED |
Polarizing filter |
Light/dark switching and sensitivity adjustment via rotary switch possible |
All necessary accessories (BEF-W100-A and P250) are included with delivery (depending on type) |
Your benefits
Highly visible light spot simplifies alignment |
Less contamination due to high optical operating reserve |
Polarization filter allows reliable detection of objects with shiny surfaces and prevents false switching |
M3 threaded mounting holes provide easy installation |
Variants available for reliably detecting clear materials, min. attenuation 20 % |
All necessary accessories (bracket and reflector) are included with delivery, reducing installation and procurement costs (depending on type) |
Product will be phased out and can be ordered until 31.12.2015.
Features | |||
Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
Dimensions (W x H x D): | 11 mm x 31 mm x 20 mm | ||
Housing design (light emission): | Rectangular | ||
Sensing range max.: | 0.01 m ... 6 m 1) | ||
Диапазон измерений: | 0.01 m ... 5 m 2) | ||
Type of light: | Visible red light | ||
Источник света: | LED 3) | ||
Длина волны: | 680 nm | ||
Angle of dispersion: | Ca. 4 ° | ||
Focus adjustable: | - | ||
Регулировки: | Potentiometer, 270 ° | ||
Light spot size (distance): | Ø 250 mm (3.5 m) |
Механика/электроника | |||
Supply voltage: | 10 V DC ... 30 V DC 1) | ||
Пульсации: | ± 10 % 2) | ||
Потребляемая мощность: | ≤ 30 mA 3) | ||
Output type: | NPN, open collector | ||
Режим переключения: | Светлое/темное переключение | ||
Режим переключения селектора: | Manually selectable | ||
Output current Imax.: | ≤ 100 mA | ||
Response time: | ≤ 0.5 ms 4) | ||
Частота переключений: | 1,000 Hz 5) | ||
Тип подключения: | Cable, 3-wire, 3 m 6) | ||
Материал кабеля: | PVC | ||
Сечение провода: | 0.18 mm² | ||
Защита цепи: | A, B, D 7)8)9) | ||
Вес: | 53 g | ||
Поляризационный фильтр: | |||
Special device: | |||
Материал оптики: | PMMA | ||
Enclosure rating: | IP 65 | ||
Ambient operating temperature: | -25 °C ... +55 °C | ||
Температура хранения: | -40 °C ... +70 °C | ||
Signal voltage NPN HIGH/LOW: | Approx. VS / | ||
Материал корпуса: | ABS/PC/POM, Plastic |
At a glance
Standard miniature housing with M3 threaded mounting holes |
Optics with standard red LED or bright light LED |
Polarizing filter |
Light/dark switching and sensitivity adjustment via rotary switch possible |
All necessary accessories (BEF-W100-A and P250) are included with delivery (depending on type) |
Your benefits
Highly visible light spot simplifies alignment |
Less contamination due to high optical operating reserve |
Polarization filter allows reliable detection of objects with shiny surfaces and prevents false switching |
M3 threaded mounting holes provide easy installation |
Variants available for reliably detecting clear materials, min. attenuation 20 % |
All necessary accessories (bracket and reflector) are included with delivery, reducing installation and procurement costs (depending on type) |
Product will be phased out and can be ordered until 31.12.2015.
Features | |||
Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
Dimensions (W x H x D): | 11 mm x 31 mm x 20 mm | ||
Housing design (light emission): | Rectangular | ||
Sensing range max.: | 0.01 m ... 6 m 1) | ||
Диапазон измерений: | 0.01 m ... 5 m 2) | ||
Type of light: | Visible red light | ||
Источник света: | LED 3) | ||
Длина волны: | 680 nm | ||
Angle of dispersion: | Ca. 4 ° | ||
Focus adjustable: | - | ||
Регулировки: | Potentiometer, 270 ° | ||
Light spot size (distance): | Ø 250 mm (3.5 m) |
Механика/электроника | |||
Supply voltage: | 10 V DC ... 30 V DC 1) | ||
Пульсации: | ± 10 % 2) | ||
Потребляемая мощность: | ≤ 30 mA 3) | ||
Output type: | NPN, open collector | ||
Режим переключения: | Светлое/темное переключение | ||
Режим переключения селектора: | Manually selectable | ||
Output current Imax.: | ≤ 100 mA | ||
Response time: | ≤ 0.5 ms 4) | ||
Частота переключений: | 1,000 Hz 5) | ||
Тип подключения: | Cable, 3-wire, 2 m 6) | ||
Материал кабеля: | PVC | ||
Сечение провода: | 0.18 mm² | ||
Защита цепи: | A, B, D 7)8)9) | ||
Вес: | 53 g | ||
Поляризационный фильтр: | |||
Special device: | |||
Материал оптики: | PMMA | ||
Enclosure rating: | IP 65 | ||
Ambient operating temperature: | -25 °C ... +55 °C | ||
Температура хранения: | -40 °C ... +70 °C | ||
Signal voltage NPN HIGH/LOW: | Approx. VS / | ||
Материал корпуса: | ABS/PC/POM, Plastic |
At a glance
Standard miniature housing with M3 threaded mounting holes |
Optics with standard red LED or bright light LED |
Polarizing filter |
Light/dark switching and sensitivity adjustment via rotary switch possible |
All necessary accessories (BEF-W100-A and P250) are included with delivery (depending on type) |
Your benefits
Highly visible light spot simplifies alignment |
Less contamination due to high optical operating reserve |
Polarization filter allows reliable detection of objects with shiny surfaces and prevents false switching |
M3 threaded mounting holes provide easy installation |
Variants available for reliably detecting clear materials, min. attenuation 20 % |
All necessary accessories (bracket and reflector) are included with delivery, reducing installation and procurement costs (depending on type) |
Product will be phased out and can be ordered until 31.12.2015.
Features | |||
Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
Dimensions (W x H x D): | 11 mm x 31 mm x 20 mm | ||
Housing design (light emission): | Rectangular | ||
Sensing range max.: | 0.01 m ... 6 m 1) | ||
Диапазон измерений: | 0.01 m ... 5 m 2) | ||
Type of light: | Visible red light | ||
Источник света: | LED 3) | ||
Длина волны: | 680 nm | ||
Angle of dispersion: | Ca. 4 ° | ||
Focus adjustable: | - | ||
Регулировки: | Potentiometer, 270 ° | ||
Light spot size (distance): | Ø 250 mm (3.5 m) |
Механика/электроника | |||
Supply voltage: | 10 V DC ... 30 V DC 1) | ||
Пульсации: | ± 10 % 2) | ||
Потребляемая мощность: | ≤ 30 mA 3) | ||
Output type: | NPN, open collector | ||
Режим переключения: | Светлое/темное переключение | ||
Режим переключения селектора: | Manually selectable | ||
Output current Imax.: | ≤ 100 mA | ||
Response time: | ≤ 0.5 ms 4) | ||
Частота переключений: | 1,000 Hz 5) | ||
Тип подключения: | Cable, 3-wire, 2 m 6) | ||
Материал кабеля: | PVC | ||
Сечение провода: | 0.18 mm² | ||
Защита цепи: | A, B, D 7)8)9) | ||
Вес: | 53 g | ||
Поляризационный фильтр: | |||
Special device: | |||
Материал оптики: | PMMA | ||
Enclosure rating: | IP 65 | ||
Ambient operating temperature: | -25 °C ... +55 °C | ||
Температура хранения: | -40 °C ... +70 °C | ||
Signal voltage NPN HIGH/LOW: | Approx. VS / | ||
Материал корпуса: | ABS/PC/POM, Plastic |
At a glance
Standard miniature housing with M3 threaded mounting holes |
Optics with standard red LED or bright light LED |
Polarizing filter |
Light/dark switching and sensitivity adjustment via rotary switch possible |
All necessary accessories (BEF-W100-A and P250) are included with delivery (depending on type) |
Your benefits
Highly visible light spot simplifies alignment |
Less contamination due to high optical operating reserve |
Polarization filter allows reliable detection of objects with shiny surfaces and prevents false switching |
M3 threaded mounting holes provide easy installation |
Variants available for reliably detecting clear materials, min. attenuation 20 % |
All necessary accessories (bracket and reflector) are included with delivery, reducing installation and procurement costs (depending on type) |
Product will be phased out and can be ordered until 31.12.2015.
Features | |||
Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
Dimensions (W x H x D): | 11 mm x 31 mm x 20 mm | ||
Housing design (light emission): | Rectangular | ||
Sensing range max.: | 0.01 m ... 6 m 1) | ||
Диапазон измерений: | 0.01 m ... 5 m 2) | ||
Type of light: | Visible red light | ||
Источник света: | LED 3) | ||
Длина волны: | 680 nm | ||
Angle of dispersion: | Ca. 4 ° | ||
Focus adjustable: | - | ||
Регулировки: | Potentiometer, 270 ° | ||
Light spot size (distance): | Ø 250 mm (3.5 m) |
Механика/электроника | |||
Supply voltage: | 10 V DC ... 30 V DC 1) | ||
Пульсации: | ± 10 % 2) | ||
Потребляемая мощность: | ≤ 30 mA 3) | ||
Output type: | NPN, open collector | ||
Режим переключения: | Светлое/темное переключение | ||
Режим переключения селектора: | Manually selectable | ||
Output current Imax.: | 100 | ||
Response time: | ≤ 0.5 ms 4) | ||
Частота переключений: | 1,000 5) | ||
Тип подключения: | Cable, 3-wire, 2 m 6) | ||
Материал кабеля: | PVC | ||
Сечение провода: | 0.18 mm² | ||
Защита цепи: | A, B, D 7)8)9) | ||
Вес: | 53 g | ||
Поляризационный фильтр: | |||
Special device: | - | ||
Материал оптики: | PMMA | ||
Enclosure rating: | IP 65 | ||
Items supplied: | Stainless steel mounting bracket (1.4301/304) BEF-W100-A, Reflector P250 | ||
Ambient operating temperature: | -25 °C ... +55 °C | ||
Температура хранения: | -40 °C ... +70 °C | ||
Signal voltage NPN HIGH/LOW: | Approx. VS / | ||
Материал корпуса: | ABS/PC/POM, Plastic |
At a glance
Standard miniature housing with M3 threaded mounting holes |
Optics with standard red LED or bright light LED |
Polarizing filter |
Light/dark switching and sensitivity adjustment via rotary switch possible |
All necessary accessories (BEF-W100-A and P250) are included with delivery (depending on type) |
Your benefits
Highly visible light spot simplifies alignment |
Less contamination due to high optical operating reserve |
Polarization filter allows reliable detection of objects with shiny surfaces and prevents false switching |
M3 threaded mounting holes provide easy installation |
Variants available for reliably detecting clear materials, min. attenuation 20 % |
All necessary accessories (bracket and reflector) are included with delivery, reducing installation and procurement costs (depending on type) |
Product will be phased out and can be ordered until 31.12.2015.
Features | |||
Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
Dimensions (W x H x D): | 11 mm x 31 mm x 20 mm | ||
Housing design (light emission): | Rectangular | ||
Sensing range max.: | 0.01 m ... 6 m 1) | ||
Диапазон измерений: | 0.01 m ... 5 m 2) | ||
Type of light: | Visible red light | ||
Источник света: | LED 3) | ||
Длина волны: | 680 nm | ||
Angle of dispersion: | Ca. 4 ° | ||
Focus adjustable: | - | ||
Регулировки: | Potentiometer, 270 ° | ||
Light spot size (distance): | Ø 250 mm (3.5 m) |
Механика/электроника | |||
Supply voltage: | 10 V DC ... 30 V DC 1) | ||
Пульсации: | ± 10 % 2) | ||
Потребляемая мощность: | ≤ 30 mA 3) | ||
Output type: | NPN, open collector | ||
Режим переключения: | Светлое/темное переключение | ||
Режим переключения селектора: | Manually selectable | ||
Output current Imax.: | ≤ 100 mA | ||
Response time: | ≤ 0.5 ms 4) | ||
Частота переключений: | 1,000 Hz 5) | ||
Тип подключения: | Cable, 3-wire, 2 m 6) | ||
Материал кабеля: | PVC | ||
Сечение провода: | 0.18 mm² | ||
Защита цепи: | A, B, D 7)8)9) | ||
Вес: | 53 g | ||
Поляризационный фильтр: | |||
Special device: | |||
Материал оптики: | PMMA | ||
Enclosure rating: | IP 65 | ||
Items supplied: | Stainless steel mounting bracket (1.4301/304)Â BEF-W100-B, Reflector P250 | ||
Ambient operating temperature: | -25 °C ... +55 °C | ||
Температура хранения: | -40 °C ... +70 °C | ||
Signal voltage NPN HIGH/LOW: | Approx. VS / | ||
Материал корпуса: | ABS/PC/POM, Plastic |
At a glance
Standard miniature housing with M3 threaded mounting holes |
Optics with standard red LED or bright light LED |
Polarizing filter |
Light/dark switching and sensitivity adjustment via rotary switch possible |
All necessary accessories (BEF-W100-A and P250) are included with delivery (depending on type) |
Your benefits
Highly visible light spot simplifies alignment |
Less contamination due to high optical operating reserve |
Polarization filter allows reliable detection of objects with shiny surfaces and prevents false switching |
M3 threaded mounting holes provide easy installation |
Variants available for reliably detecting clear materials, min. attenuation 20 % |
All necessary accessories (bracket and reflector) are included with delivery, reducing installation and procurement costs (depending on type) |
Product will be phased out and can be ordered until 31.12.2015.
Features | |||
Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
Dimensions (W x H x D): | 11 mm x 31 mm x 20 mm | ||
Housing design (light emission): | Rectangular | ||
Sensing range max.: | 0.01 m ... 6 m 1) | ||
Диапазон измерений: | 0.01 m ... 5 m 2) | ||
Type of light: | Visible red light | ||
Источник света: | LED 3) | ||
Длина волны: | 680 nm | ||
Angle of dispersion: | Ca. 4 ° | ||
Focus adjustable: | - | ||
Light spot size (distance): | Ø 250 mm (3.5 m) |
Механика/электроника | |||
Supply voltage: | 10 V DC ... 30 V DC 1) | ||
Пульсации: | ± 10 % 2) | ||
Потребляемая мощность: | ≤ 30 mA 3) | ||
Output type: | NPN, open collector | ||
Режим переключения: | Dark switching | ||
Output current Imax.: | ≤ 100 mA | ||
Response time: | ≤ 0.5 ms 4) | ||
Частота переключений: | 1,000 Hz 5) | ||
Тип подключения: | Connector M8, 3-pin | ||
Защита цепи: | A, B, D 6)7)8) | ||
Вес: | 9 g | ||
Поляризационный фильтр: | |||
Special device: | - | ||
Материал оптики: | PMMA | ||
Enclosure rating: | IP 65 | ||
Ambient operating temperature: | -25 °C ... +55 °C | ||
Температура хранения: | -40 °C ... +70 °C | ||
Signal voltage NPN HIGH/LOW: | Approx. VS / | ||
Материал корпуса: | ABS/PC, Plastic |
At a glance
Standard miniature housing with M3 threaded mounting holes |
Optics with standard red LED or bright light LED |
Polarizing filter |
Light/dark switching and sensitivity adjustment via rotary switch possible |
All necessary accessories (BEF-W100-A and P250) are included with delivery (depending on type) |
Your benefits
Highly visible light spot simplifies alignment |
Less contamination due to high optical operating reserve |
Polarization filter allows reliable detection of objects with shiny surfaces and prevents false switching |
M3 threaded mounting holes provide easy installation |
Variants available for reliably detecting clear materials, min. attenuation 20 % |
All necessary accessories (bracket and reflector) are included with delivery, reducing installation and procurement costs (depending on type) |
Product will be phased out and can be ordered until 31.12.2015.
Features | |||
Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
Dimensions (W x H x D): | 11 mm x 31 mm x 20 mm | ||
Housing design (light emission): | Rectangular | ||
Sensing range max.: | 0.01 m ... 6 m 1) | ||
Диапазон измерений: | 0.01 m ... 5 m 2) | ||
Type of light: | Visible red light | ||
Источник света: | LED 3) | ||
Длина волны: | 680 nm | ||
Angle of dispersion: | Ca. 4 ° | ||
Focus adjustable: | - | ||
Light spot size (distance): | Ø 250 mm (3.5 m) |
Механика/электроника | |||
Supply voltage: | 10 V DC ... 30 V DC 1) | ||
Пульсации: | ± 10 % 2) | ||
Потребляемая мощность: | ≤ 30 mA 3) | ||
Output type: | NPN, open collector | ||
Режим переключения: | Dark switching | ||
Output current Imax.: | 100 | ||
Response time: | ≤ 0.5 ms 4) | ||
Частота переключений: | 1,000 5) | ||
Тип подключения: | Connector M8, 3-pin | ||
Защита цепи: | A, B, D 6)7)8) | ||
Вес: | 9 g | ||
Поляризационный фильтр: | |||
Special device: | - | ||
Материал оптики: | PMMA | ||
Enclosure rating: | IP 65 | ||
Items supplied: | Stainless steel mounting bracket (1.4301/304) BEF-W100-A, Reflector P250 | ||
Ambient operating temperature: | -25 °C ... +55 °C | ||
Температура хранения: | -40 °C ... +70 °C | ||
Signal voltage NPN HIGH/LOW: | Approx. VS / | ||
Материал корпуса: | ABS/PC, Plastic |
At a glance
Standard miniature housing with M3 threaded mounting holes |
Optics with standard red LED or bright light LED |
Polarizing filter |
Light/dark switching and sensitivity adjustment via rotary switch possible |
All necessary accessories (BEF-W100-A and P250) are included with delivery (depending on type) |
Your benefits
Highly visible light spot simplifies alignment |
Less contamination due to high optical operating reserve |
Polarization filter allows reliable detection of objects with shiny surfaces and prevents false switching |
M3 threaded mounting holes provide easy installation |
Variants available for reliably detecting clear materials, min. attenuation 20 % |
All necessary accessories (bracket and reflector) are included with delivery, reducing installation and procurement costs (depending on type) |
Product will be phased out and can be ordered until 31.12.2015.
Features | |||
Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
Dimensions (W x H x D): | 11 mm x 31 mm x 20 mm | ||
Housing design (light emission): | Rectangular | ||
Sensing range max.: | 0.01 m ... 6 m 1) | ||
Диапазон измерений: | 0.01 m ... 5 m 2) | ||
Type of light: | Visible red light | ||
Источник света: | LED 3) | ||
Длина волны: | 680 nm | ||
Angle of dispersion: | Ca. 4 ° | ||
Focus adjustable: | - | ||
Light spot size (distance): | Ø 250 mm (3.5 m) |
Механика/электроника | |||
Supply voltage: | 10 V DC ... 30 V DC 1) | ||
Пульсации: | ± 10 % 2) | ||
Потребляемая мощность: | ≤ 30 mA 3) | ||
Output type: | NPN, open collector | ||
Режим переключения: | Light switching | ||
Output current Imax.: | ≤ 100 mA | ||
Response time: | ≤ 0.5 ms 4) | ||
Частота переключений: | 1,000 Hz 5) | ||
Тип подключения: | Connector M8, 3-pin | ||
Защита цепи: | A, B, D 6)7)8) | ||
Вес: | 9 g | ||
Поляризационный фильтр: | |||
Special device: | - | ||
Материал оптики: | PMMA | ||
Enclosure rating: | IP 65 | ||
Ambient operating temperature: | -25 °C ... +55 °C | ||
Температура хранения: | -40 °C ... +70 °C | ||
Signal voltage NPN HIGH/LOW: | Approx. VS / | ||
Материал корпуса: | ABS/PC, Plastic |
At a glance
Standard miniature housing with M3 threaded mounting holes |
Optics with standard red LED or bright light LED |
Polarizing filter |
Light/dark switching and sensitivity adjustment via rotary switch possible |
All necessary accessories (BEF-W100-A and P250) are included with delivery (depending on type) |
Your benefits
Highly visible light spot simplifies alignment |
Less contamination due to high optical operating reserve |
Polarization filter allows reliable detection of objects with shiny surfaces and prevents false switching |
M3 threaded mounting holes provide easy installation |
Variants available for reliably detecting clear materials, min. attenuation 20 % |
All necessary accessories (bracket and reflector) are included with delivery, reducing installation and procurement costs (depending on type) |
Product will be phased out and can be ordered until 31.12.2015.
Features | |||
Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
Dimensions (W x H x D): | 11 mm x 31 mm x 20 mm | ||
Housing design (light emission): | Rectangular | ||
Sensing range max.: | 0.01 m ... 6 m 1) | ||
Диапазон измерений: | 0.01 m ... 5 m 2) | ||
Type of light: | Visible red light | ||
Источник света: | LED 3) | ||
Длина волны: | 680 nm | ||
Angle of dispersion: | Ca. 4 ° | ||
Focus adjustable: | - | ||
Light spot size (distance): | Ø 250 mm (3.5 m) |
Механика/электроника | |||
Supply voltage: | 10 V DC ... 30 V DC 1) | ||
Пульсации: | ± 10 % 2) | ||
Потребляемая мощность: | ≤ 30 mA 3) | ||
Output type: | NPN, open collector | ||
Режим переключения: | Light switching | ||
Output current Imax.: | 100 | ||
Response time: | ≤ 0.5 ms 4) | ||
Частота переключений: | 1,000 5) | ||
Тип подключения: | Connector M8, 3-pin | ||
Защита цепи: | A, B, D 6)7)8) | ||
Вес: | 9 g | ||
Поляризационный фильтр: | |||
Special device: | - | ||
Материал оптики: | PMMA | ||
Enclosure rating: | IP 65 | ||
Items supplied: | Stainless steel mounting bracket (1.4301/304) BEF-W100-A, Reflector P250 | ||
Ambient operating temperature: | -25 °C ... +55 °C | ||
Температура хранения: | -40 °C ... +70 °C | ||
Signal voltage NPN HIGH/LOW: | Approx. VS / | ||
Материал корпуса: | ABS/PC, Plastic |
At a glance
Standard miniature housing with M3 threaded mounting holes |
Optics with standard red LED or bright light LED |
Polarizing filter |
Light/dark switching and sensitivity adjustment via rotary switch possible |
All necessary accessories (BEF-W100-A and P250) are included with delivery (depending on type) |
Your benefits
Highly visible light spot simplifies alignment |
Less contamination due to high optical operating reserve |
Polarization filter allows reliable detection of objects with shiny surfaces and prevents false switching |
M3 threaded mounting holes provide easy installation |
Variants available for reliably detecting clear materials, min. attenuation 20 % |
All necessary accessories (bracket and reflector) are included with delivery, reducing installation and procurement costs (depending on type) |
Product will be phased out and can be ordered until 31.12.2015.
Features | |||
Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
Dimensions (W x H x D): | 11 mm x 31 mm x 20 mm | ||
Housing design (light emission): | Rectangular | ||
Sensing range max.: | 0.1 m ... 7.5 m 1) | ||
Диапазон измерений: | 0.1 m ... 6 m 2) | ||
Type of light: | Visible red light | ||
Источник света: | LED 3) | ||
Длина волны: | 645 nm | ||
Angle of dispersion: | Ca. 2 ° | ||
Focus adjustable: | - | ||
Регулировки: | Potentiometer, 270 ° | ||
Light spot size (distance): | Ø 150 mm (4 m) |
Механика/электроника | |||
Supply voltage: | 10 V DC ... 30 V DC 1) | ||
Пульсации: | ± 10 % 2) | ||
Потребляемая мощность: | ≤ 30 mA 3) | ||
Output type: | NPN, open collector | ||
Режим переключения: | Светлое/темное переключение | ||
Режим переключения селектора: | Manually selectable | ||
Output current Imax.: | ≤ 100 mA | ||
Response time: | ≤ 0.5 ms 4) | ||
Частота переключений: | 1,000 Hz 5) | ||
Тип подключения: | Connector M8, 3-pin | ||
Защита цепи: | A, B, D 6)7)8) | ||
Вес: | 9 g | ||
Поляризационный фильтр: | |||
Special device: | - | ||
Материал оптики: | PMMA | ||
Enclosure rating: | IP 67 | ||
Ambient operating temperature: | -25 °C ... +55 °C | ||
Температура хранения: | -40 °C ... +70 °C | ||
UL File No.: | NRKH2.E300503 & NRKH8.E300503 | ||
Signal voltage NPN HIGH/LOW: | Approx. VS / | ||
Материал корпуса: | ABS/PC/POM, Plastic |
At a glance
Standard miniature housing with M3 threaded mounting holes |
Optics with standard red LED or bright light LED |
Polarizing filter |
Light/dark switching and sensitivity adjustment via rotary switch possible |
All necessary accessories (BEF-W100-A and P250) are included with delivery (depending on type) |
Your benefits
Highly visible light spot simplifies alignment |
Less contamination due to high optical operating reserve |
Polarization filter allows reliable detection of objects with shiny surfaces and prevents false switching |
M3 threaded mounting holes provide easy installation |
Variants available for reliably detecting clear materials, min. attenuation 20 % |
All necessary accessories (bracket and reflector) are included with delivery, reducing installation and procurement costs (depending on type) |
Product will be phased out and can be ordered until 31.12.2015.
Features | |||
Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
Dimensions (W x H x D): | 11 mm x 31 mm x 20 mm | ||
Housing design (light emission): | Rectangular | ||
Sensing range max.: | 0.1 m ... 7.5 m 1) | ||
Диапазон измерений: | 0.1 m ... 6 m 2) | ||
Type of light: | Visible red light | ||
Источник света: | LED 3) | ||
Длина волны: | 645 nm | ||
Angle of dispersion: | Ca. 2 ° | ||
Focus adjustable: | - | ||
Регулировки: | Potentiometer, 270 ° | ||
Light spot size (distance): | Ø 150 mm (4 m) |
Механика/электроника | |||
Supply voltage: | 10 V DC ... 30 V DC 1) | ||
Пульсации: | ± 10 % 2) | ||
Потребляемая мощность: | ≤ 30 mA 3) | ||
Output type: | NPN, open collector | ||
Режим переключения: | Светлое/темное переключение | ||
Режим переключения селектора: | Manually selectable | ||
Output current Imax.: | 100 | ||
Response time: | ≤ 0.5 ms 4) | ||
Частота переключений: | 1,000 5) | ||
Тип подключения: | Connector M8, 3-pin | ||
Защита цепи: | A, B, D 6)7)8) | ||
Вес: | 9 g | ||
Поляризационный фильтр: | |||
Special device: | - | ||
Материал оптики: | PMMA | ||
Enclosure rating: | IP 67 | ||
Items supplied: | Stainless steel mounting bracket (1.4301/304) BEF-W100-A, Reflector P250 | ||
Ambient operating temperature: | -25 °C ... +55 °C | ||
Температура хранения: | -40 °C ... +70 °C | ||
UL File No.: | NRKH2.E300503 & NRKH8.E300503 | ||
Signal voltage NPN HIGH/LOW: | Approx. VS / | ||
Материал корпуса: | ABS/PC/POM, Plastic |
At a glance
Standard miniature housing with M3 threaded mounting holes |
Optics with standard red LED or bright light LED |
Polarizing filter |
Light/dark switching and sensitivity adjustment via rotary switch possible |
All necessary accessories (BEF-W100-A and P250) are included with delivery (depending on type) |
Your benefits
Highly visible light spot simplifies alignment |
Less contamination due to high optical operating reserve |
Polarization filter allows reliable detection of objects with shiny surfaces and prevents false switching |
M3 threaded mounting holes provide easy installation |
Variants available for reliably detecting clear materials, min. attenuation 20 % |
All necessary accessories (bracket and reflector) are included with delivery, reducing installation and procurement costs (depending on type) |
Product will be phased out and can be ordered until 31.12.2015.
Features | |||
Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
Dimensions (W x H x D): | 11 mm x 31 mm x 20 mm | ||
Housing design (light emission): | Rectangular | ||
Sensing range max.: | 0.01 m ... 3 m 1) | ||
Диапазон измерений: | 0.01 m ... 2.6 m 2) | ||
Type of light: | Visible red light | ||
Источник света: | LED 3) | ||
Длина волны: | 680 nm | ||
Angle of dispersion: | Ca. 4 ° | ||
Focus adjustable: | - | ||
Регулировки: | Potentiometer, 270 ° | ||
Light spot size (distance): | Ø 200 mm (2 m) |
Механика/электроника | |||
Supply voltage: | 10 V DC ... 30 V DC 1) | ||
Пульсации: | ± 10 % 2) | ||
Потребляемая мощность: | ≤ 30 mA 3) | ||
Output type: | NPN, open collector | ||
Режим переключения: | Светлое/темное переключение | ||
Режим переключения селектора: | Manually selectable | ||
Output current Imax.: | ≤ 100 mA | ||
Response time: | ≤ 0.5 ms 4) | ||
Частота переключений: | 1,000 Hz 5) | ||
Attenuation along light beam: | > 20 % | ||
Тип подключения: | Connector M8, 3-pin | ||
Защита цепи: | A, B, D 6)7)8) | ||
Вес: | 9 g | ||
Поляризационный фильтр: | - | ||
Special device: | - | ||
Материал оптики: | PMMA | ||
Enclosure rating: | IP 65 | ||
Special feature: | Detection of transparent objects | ||
Ambient operating temperature: | -25 °C ... +55 °C | ||
Температура хранения: | -40 °C ... +70 °C | ||
Signal voltage NPN HIGH/LOW: | Approx. VS / | ||
Материал корпуса: | ABS/PC/POM, Plastic |
At a glance
Standard miniature housing with M3 threaded mounting holes |
Optics with standard red LED or bright light LED |
Polarizing filter |
Light/dark switching and sensitivity adjustment via rotary switch possible |
All necessary accessories (BEF-W100-A and P250) are included with delivery (depending on type) |
Your benefits
Highly visible light spot simplifies alignment |
Less contamination due to high optical operating reserve |
Polarization filter allows reliable detection of objects with shiny surfaces and prevents false switching |
M3 threaded mounting holes provide easy installation |
Variants available for reliably detecting clear materials, min. attenuation 20 % |
All necessary accessories (bracket and reflector) are included with delivery, reducing installation and procurement costs (depending on type) |
Product will be phased out and can be ordered until 31.12.2015.
Features | |||
Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
Dimensions (W x H x D): | 11 mm x 31 mm x 20 mm | ||
Housing design (light emission): | Rectangular | ||
Sensing range max.: | 0.01 m ... 3 m 1) | ||
Диапазон измерений: | 0.01 m ... 2.6 m 2) | ||
Type of light: | Visible red light | ||
Источник света: | LED 3) | ||
Длина волны: | 680 nm | ||
Angle of dispersion: | Ca. 4 ° | ||
Focus adjustable: | - | ||
Регулировки: | Potentiometer, 270 ° | ||
Light spot size (distance): | Ø 200 mm (2 m) |
Механика/электроника | |||
Supply voltage: | 10 V DC ... 30 V DC 1) | ||
Пульсации: | ± 10 % 2) | ||
Потребляемая мощность: | ≤ 30 mA 3) | ||
Output type: | NPN, open collector | ||
Режим переключения: | Светлое/темное переключение | ||
Режим переключения селектора: | Manually selectable | ||
Output current Imax.: | 100 | ||
Response time: | ≤ 0.5 ms 4) | ||
Частота переключений: | 1,000 5) | ||
Attenuation along light beam: | > 20 % | ||
Тип подключения: | Connector M8, 3-pin | ||
Защита цепи: | A, B, D 6)7)8) | ||
Вес: | 9 g | ||
Поляризационный фильтр: | - | ||
Special device: | - | ||
Материал оптики: | PMMA | ||
Enclosure rating: | IP 65 | ||
Items supplied: | Stainless steel mounting bracket (1.4301/304) BEF-W100-A, Reflector P250 | ||
Special feature: | Detection of transparent objects | ||
Ambient operating temperature: | -25 °C ... +55 °C | ||
Температура хранения: | -40 °C ... +70 °C | ||
Signal voltage NPN HIGH/LOW: | Approx. VS / | ||
Материал корпуса: | ABS/PC/POM, Plastic |
At a glance
Standard miniature housing with M3 threaded mounting holes |
Optics with standard red LED or bright light LED |
Polarizing filter |
Light/dark switching and sensitivity adjustment via rotary switch possible |
All necessary accessories (BEF-W100-A and P250) are included with delivery (depending on type) |
Your benefits
Highly visible light spot simplifies alignment |
Less contamination due to high optical operating reserve |
Polarization filter allows reliable detection of objects with shiny surfaces and prevents false switching |
M3 threaded mounting holes provide easy installation |
Variants available for reliably detecting clear materials, min. attenuation 20 % |
All necessary accessories (bracket and reflector) are included with delivery, reducing installation and procurement costs (depending on type) |
Product will be phased out and can be ordered until 31.12.2015.
Features | |||
Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
Dimensions (W x H x D): | 11 mm x 31 mm x 20 mm | ||
Housing design (light emission): | Rectangular | ||
Sensing range max.: | 0.01 m ... 6 m 1) | ||
Диапазон измерений: | 0.01 m ... 5 m 2) | ||
Type of light: | Visible red light | ||
Источник света: | LED 3) | ||
Длина волны: | 680 nm | ||
Angle of dispersion: | Ca. 4 ° | ||
Focus adjustable: | - | ||
Регулировки: | Potentiometer, 270 ° | ||
Light spot size (distance): | Ø 250 mm (3.5 m) |
Механика/электроника | |||
Supply voltage: | 10 V DC ... 30 V DC 1) | ||
Пульсации: | ± 10 % 2) | ||
Потребляемая мощность: | ≤ 30 mA 3) | ||
Output type: | NPN, open collector | ||
Режим переключения: | Светлое/темное переключение | ||
Режим переключения селектора: | Manually selectable | ||
Output current Imax.: | ≤ 100 mA | ||
Response time: | ≤ 0.5 ms 4) | ||
Частота переключений: | 1,000 Hz 5) | ||
Тип подключения: | Connector M8, 3-pin | ||
Защита цепи: | A, B, D 6)7)8) | ||
Вес: | 9 g | ||
Поляризационный фильтр: | |||
Special device: | - | ||
Материал оптики: | PMMA | ||
Enclosure rating: | IP 65 | ||
Ambient operating temperature: | -25 °C ... +55 °C | ||
Температура хранения: | -40 °C ... +70 °C | ||
Signal voltage NPN HIGH/LOW: | Approx. VS / | ||
Материал корпуса: | ABS/PC/POM, Plastic |
At a glance
Standard miniature housing with M3 threaded mounting holes |
Optics with standard red LED or bright light LED |
Polarizing filter |
Light/dark switching and sensitivity adjustment via rotary switch possible |
All necessary accessories (BEF-W100-A and P250) are included with delivery (depending on type) |
Your benefits
Highly visible light spot simplifies alignment |
Less contamination due to high optical operating reserve |
Polarization filter allows reliable detection of objects with shiny surfaces and prevents false switching |
M3 threaded mounting holes provide easy installation |
Variants available for reliably detecting clear materials, min. attenuation 20 % |
All necessary accessories (bracket and reflector) are included with delivery, reducing installation and procurement costs (depending on type) |
Product will be phased out and can be ordered until 31.12.2015.
Features | |||
Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
Dimensions (W x H x D): | 11 mm x 31 mm x 20 mm | ||
Housing design (light emission): | Rectangular | ||
Sensing range max.: | 0.01 m ... 6 m 1) | ||
Диапазон измерений: | 0.01 m ... 5 m 2) | ||
Type of light: | Visible red light | ||
Источник света: | LED 3) | ||
Длина волны: | 680 nm | ||
Angle of dispersion: | Ca. 4 ° | ||
Focus adjustable: | - | ||
Регулировки: | Potentiometer, 270 ° | ||
Light spot size (distance): | Ø 250 mm (3.5 m) |
Механика/электроника | |||
Supply voltage: | 10 V DC ... 30 V DC 1) | ||
Пульсации: | ± 10 % 2) | ||
Потребляемая мощность: | ≤ 30 mA 3) | ||
Output type: | NPN, open collector | ||
Режим переключения: | Светлое/темное переключение | ||
Режим переключения селектора: | Manually selectable | ||
Output current Imax.: | 100 | ||
Response time: | ≤ 0.5 ms 4) | ||
Частота переключений: | 1,000 5) | ||
Тип подключения: | Connector M8, 3-pin | ||
Защита цепи: | A, B, D 6)7)8) | ||
Вес: | 9 g | ||
Поляризационный фильтр: | |||
Special device: | - | ||
Материал оптики: | PMMA | ||
Enclosure rating: | IP 65 | ||
Items supplied: | Stainless steel mounting bracket (1.4301/304) BEF-W100-A, Reflector P250 | ||
Ambient operating temperature: | -25 °C ... +55 °C | ||
Температура хранения: | -40 °C ... +70 °C | ||
Signal voltage NPN HIGH/LOW: | Approx. VS / | ||
Материал корпуса: | ABS/PC/POM, Plastic |
At a glance
Standard miniature housing with M3 threaded mounting holes |
Optics with standard red LED or bright light LED |
Polarizing filter |
Light/dark switching and sensitivity adjustment via rotary switch possible |
All necessary accessories (BEF-W100-A and P250) are included with delivery (depending on type) |
Your benefits
Highly visible light spot simplifies alignment |
Less contamination due to high optical operating reserve |
Polarization filter allows reliable detection of objects with shiny surfaces and prevents false switching |
M3 threaded mounting holes provide easy installation |
Variants available for reliably detecting clear materials, min. attenuation 20 % |
All necessary accessories (bracket and reflector) are included with delivery, reducing installation and procurement costs (depending on type) |
Product will be phased out and can be ordered until 31.12.2015.
Features | |||
Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
Dimensions (W x H x D): | 11 mm x 31 mm x 20 mm | ||
Housing design (light emission): | Rectangular | ||
Sensing range max.: | 0.01 m ... 6 m 1) | ||
Диапазон измерений: | 0.01 m ... 5 m 2) | ||
Type of light: | Visible red light | ||
Источник света: | LED 3) | ||
Длина волны: | 680 nm | ||
Angle of dispersion: | Ca. 4 ° | ||
Focus adjustable: | - | ||
Light spot size (distance): | Ø 250 mm (3.5 m) |
Механика/электроника | |||
Supply voltage: | 10 V DC ... 30 V DC 1) | ||
Пульсации: | ± 10 % 2) | ||
Потребляемая мощность: | ≤ 30 mA 3) | ||
Output type: | NPN, open collector | ||
Режим переключения: | Dark switching | ||
Output current Imax.: | ≤ 100 mA | ||
Response time: | ≤ 0.5 ms 4) | ||
Частота переключений: | 1,000 Hz 5) | ||
Тип подключения: | Connector M8, 4-pin | ||
Защита цепи: | A, B, D 6)7)8) | ||
Вес: | 9 g | ||
Поляризационный фильтр: | |||
Special device: | - | ||
Материал оптики: | PMMA | ||
Enclosure rating: | IP 65 | ||
Ambient operating temperature: | -25 °C ... +55 °C | ||
Температура хранения: | -40 °C ... +70 °C | ||
Signal voltage NPN HIGH/LOW: | Approx. VS / | ||
Материал корпуса: | ABS/PC, Plastic |
At a glance
Standard miniature housing with M3 threaded mounting holes |
Optics with standard red LED or bright light LED |
Polarizing filter |
Light/dark switching and sensitivity adjustment via rotary switch possible |
All necessary accessories (BEF-W100-A and P250) are included with delivery (depending on type) |
Your benefits
Highly visible light spot simplifies alignment |
Less contamination due to high optical operating reserve |
Polarization filter allows reliable detection of objects with shiny surfaces and prevents false switching |
M3 threaded mounting holes provide easy installation |
Variants available for reliably detecting clear materials, min. attenuation 20 % |
All necessary accessories (bracket and reflector) are included with delivery, reducing installation and procurement costs (depending on type) |
Product will be phased out and can be ordered until 31.12.2015.
Features | |||
Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
Dimensions (W x H x D): | 11 mm x 31 mm x 20 mm | ||
Housing design (light emission): | Rectangular | ||
Sensing range max.: | 0.01 m ... 6 m 1) | ||
Диапазон измерений: | 0.01 m ... 5 m 2) | ||
Type of light: | Visible red light | ||
Источник света: | LED 3) | ||
Длина волны: | 680 nm | ||
Angle of dispersion: | Ca. 4 ° | ||
Focus adjustable: | - | ||
Light spot size (distance): | Ø 250 mm (3.5 m) |
Механика/электроника | |||
Supply voltage: | 10 V DC ... 30 V DC 1) | ||
Пульсации: | ± 10 % 2) | ||
Потребляемая мощность: | ≤ 30 mA 3) | ||
Output type: | NPN, open collector | ||
Режим переключения: | Dark switching | ||
Output current Imax.: | 100 | ||
Response time: | ≤ 0.5 ms 4) | ||
Частота переключений: | 1,000 5) | ||
Тип подключения: | Connector M8, 4-pin | ||
Защита цепи: | A, B, D 6)7)8) | ||
Вес: | 9 g | ||
Поляризационный фильтр: | |||
Special device: | - | ||
Материал оптики: | PMMA | ||
Enclosure rating: | IP 65 | ||
Items supplied: | Stainless steel mounting bracket (1.4301/304) BEF-W100-A, Reflector P250 | ||
Ambient operating temperature: | -25 °C ... +55 °C | ||
Температура хранения: | -40 °C ... +70 °C | ||
Signal voltage NPN HIGH/LOW: | Approx. VS / | ||
Материал корпуса: | ABS/PC, Plastic |
At a glance
Standard miniature housing with M3 threaded mounting holes |
Optics with standard red LED or bright light LED |
Polarizing filter |
Light/dark switching and sensitivity adjustment via rotary switch possible |
All necessary accessories (BEF-W100-A and P250) are included with delivery (depending on type) |
Your benefits
Highly visible light spot simplifies alignment |
Less contamination due to high optical operating reserve |
Polarization filter allows reliable detection of objects with shiny surfaces and prevents false switching |
M3 threaded mounting holes provide easy installation |
Variants available for reliably detecting clear materials, min. attenuation 20 % |
All necessary accessories (bracket and reflector) are included with delivery, reducing installation and procurement costs (depending on type) |
Product will be phased out and can be ordered until 31.12.2015.
Features | |||
Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
Dimensions (W x H x D): | 11 mm x 31 mm x 20 mm | ||
Housing design (light emission): | Rectangular | ||
Sensing range max.: | 0.01 m ... 6 m 1) | ||
Диапазон измерений: | 0.01 m ... 5 m 2) | ||
Type of light: | Visible red light | ||
Источник света: | LED 3) | ||
Длина волны: | 680 nm | ||
Angle of dispersion: | Ca. 4 ° | ||
Focus adjustable: | - | ||
Light spot size (distance): | Ø 250 mm (3.5 m) |
Механика/электроника | |||
Supply voltage: | 10 V DC ... 30 V DC 1) | ||
Пульсации: | ± 10 % 2) | ||
Потребляемая мощность: | ≤ 30 mA 3) | ||
Output type: | NPN, open collector | ||
Режим переключения: | Light switching | ||
Output current Imax.: | ≤ 100 mA | ||
Response time: | ≤ 0.5 ms 4) | ||
Частота переключений: | 1,000 Hz 5) | ||
Тип подключения: | Connector M8, 4-pin | ||
Защита цепи: | A, B, D 6)7)8) | ||
Вес: | 9 g | ||
Поляризационный фильтр: | |||
Special device: | - | ||
Материал оптики: | PMMA | ||
Enclosure rating: | IP 65 | ||
Ambient operating temperature: | -25 °C ... +55 °C | ||
Температура хранения: | -40 °C ... +70 °C | ||
Signal voltage NPN HIGH/LOW: | Approx. VS / | ||
Материал корпуса: | ABS/PC, Plastic |
At a glance
Standard miniature housing with M3 threaded mounting holes |
Optics with standard red LED or bright light LED |
Polarizing filter |
Light/dark switching and sensitivity adjustment via rotary switch possible |
All necessary accessories (BEF-W100-A and P250) are included with delivery (depending on type) |
Your benefits
Highly visible light spot simplifies alignment |
Less contamination due to high optical operating reserve |
Polarization filter allows reliable detection of objects with shiny surfaces and prevents false switching |
M3 threaded mounting holes provide easy installation |
Variants available for reliably detecting clear materials, min. attenuation 20 % |
All necessary accessories (bracket and reflector) are included with delivery, reducing installation and procurement costs (depending on type) |
Product will be phased out and can be ordered until 31.12.2015.
Features | |||
Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
Dimensions (W x H x D): | 11 mm x 31 mm x 20 mm | ||
Housing design (light emission): | Rectangular | ||
Sensing range max.: | 0.01 m ... 6 m 1) | ||
Диапазон измерений: | 0.01 m ... 5 m 2) | ||
Type of light: | Visible red light | ||
Источник света: | LED 3) | ||
Длина волны: | 680 nm | ||
Angle of dispersion: | Ca. 4 ° | ||
Focus adjustable: | - | ||
Light spot size (distance): | Ø 250 mm (3.5 m) |
Механика/электроника | |||
Supply voltage: | 10 V DC ... 30 V DC 1) | ||
Пульсации: | ± 10 % 2) | ||
Потребляемая мощность: | ≤ 30 mA 3) | ||
Output type: | NPN, open collector | ||
Режим переключения: | Light switching | ||
Output current Imax.: | 100 | ||
Response time: | ≤ 0.5 ms 4) | ||
Частота переключений: | 1,000 5) | ||
Тип подключения: | Connector M8, 4-pin | ||
Защита цепи: | A, B, D 6)7)8) | ||
Вес: | 9 g | ||
Поляризационный фильтр: | |||
Special device: | - | ||
Материал оптики: | PMMA | ||
Enclosure rating: | IP 65 | ||
Items supplied: | Stainless steel mounting bracket (1.4301/304) BEF-W100-A, Reflector P250 | ||
Ambient operating temperature: | -25 °C ... +55 °C | ||
Температура хранения: | -40 °C ... +70 °C | ||
Signal voltage NPN HIGH/LOW: | Approx. VS / | ||
Материал корпуса: | ABS/PC, Plastic |
At a glance
Standard miniature housing with M3 threaded mounting holes |
Optics with standard red LED or bright light LED |
Polarizing filter |
Light/dark switching and sensitivity adjustment via rotary switch possible |
All necessary accessories (BEF-W100-A and P250) are included with delivery (depending on type) |
Your benefits
Highly visible light spot simplifies alignment |
Less contamination due to high optical operating reserve |
Polarization filter allows reliable detection of objects with shiny surfaces and prevents false switching |
M3 threaded mounting holes provide easy installation |
Variants available for reliably detecting clear materials, min. attenuation 20 % |
All necessary accessories (bracket and reflector) are included with delivery, reducing installation and procurement costs (depending on type) |
Product will be phased out and can be ordered until 31.12.2015.
Features | |||
Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
Dimensions (W x H x D): | 11 mm x 31 mm x 20 mm | ||
Housing design (light emission): | Rectangular | ||
Sensing range max.: | 0.1 m ... 7.5 m 1) | ||
Диапазон измерений: | 0.1 m ... 6 m 2) | ||
Type of light: | Visible red light | ||
Источник света: | LED 3) | ||
Длина волны: | 645 nm | ||
Angle of dispersion: | Ca. 2 ° | ||
Focus adjustable: | - | ||
Регулировки: | Potentiometer, 270 ° | ||
Light spot size (distance): | Ø 150 mm (4 m) |
Механика/электроника | |||
Supply voltage: | 10 V DC ... 30 V DC 1) | ||
Пульсации: | ± 10 % 2) | ||
Потребляемая мощность: | ≤ 30 mA 3) | ||
Output type: | NPN, open collector | ||
Режим переключения: | Светлое/темное переключение | ||
Режим переключения селектора: | Manually selectable | ||
Output current Imax.: | ≤ 100 mA | ||
Response time: | ≤ 0.5 ms 4) | ||
Частота переключений: | 1,000 Hz 5) | ||
Тип подключения: | Connector M8, 4-pin | ||
Защита цепи: | A, B, D 6)7)8) | ||
Вес: | 9 g | ||
Поляризационный фильтр: | |||
Special device: | - | ||
Материал оптики: | PMMA | ||
Enclosure rating: | IP 67 | ||
Ambient operating temperature: | -25 °C ... +55 °C | ||
Температура хранения: | -40 °C ... +70 °C | ||
UL File No.: | NRKH2.E300503 & NRKH8.E300503 | ||
Signal voltage NPN HIGH/LOW: | Approx. VS / | ||
Материал корпуса: | ABS/PC/POM, Plastic |
At a glance
Standard miniature housing with M3 threaded mounting holes |
Optics with standard red LED or bright light LED |
Polarizing filter |
Light/dark switching and sensitivity adjustment via rotary switch possible |
All necessary accessories (BEF-W100-A and P250) are included with delivery (depending on type) |
Your benefits
Highly visible light spot simplifies alignment |
Less contamination due to high optical operating reserve |
Polarization filter allows reliable detection of objects with shiny surfaces and prevents false switching |
M3 threaded mounting holes provide easy installation |
Variants available for reliably detecting clear materials, min. attenuation 20 % |
All necessary accessories (bracket and reflector) are included with delivery, reducing installation and procurement costs (depending on type) |
Product will be phased out and can be ordered until 31.12.2015.
Features | |||
Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
Dimensions (W x H x D): | 11 mm x 31 mm x 20 mm | ||
Housing design (light emission): | Rectangular | ||
Sensing range max.: | 0.1 m ... 7.5 m 1) | ||
Диапазон измерений: | 0.1 m ... 6 m 2) | ||
Type of light: | Visible red light | ||
Источник света: | LED 3) | ||
Длина волны: | 645 nm | ||
Angle of dispersion: | Ca. 2 ° | ||
Focus adjustable: | - | ||
Регулировки: | Potentiometer, 270 ° | ||
Light spot size (distance): | Ø 150 mm (4 m) |
Механика/электроника | |||
Supply voltage: | 10 V DC ... 30 V DC 1) | ||
Пульсации: | ± 10 % 2) | ||
Потребляемая мощность: | ≤ 30 mA 3) | ||
Output type: | NPN, open collector | ||
Режим переключения: | Светлое/темное переключение | ||
Режим переключения селектора: | Manually selectable | ||
Output current Imax.: | ≤ 100 mA | ||
Response time: | ≤ 0.5 ms 4) | ||
Частота переключений: | 1,000 Hz 5) | ||
Тип подключения: | Connector M8, 4-pin | ||
Защита цепи: | A, B, D 6)7)8) | ||
Вес: | 9 g | ||
Поляризационный фильтр: | |||
Special device: | - | ||
Материал оптики: | PMMA | ||
Enclosure rating: | IP 67 | ||
Items supplied: | Stainless steel mounting bracket (1.4301/304) BEF-W100-A, Reflector P250 | ||
Ambient operating temperature: | -25 °C ... +55 °C | ||
Температура хранения: | -40 °C ... +70 °C | ||
UL File No.: | NRKH2.E300503 & NRKH8.E300503 | ||
Signal voltage NPN HIGH/LOW: | Approx. VS / | ||
Материал корпуса: | ABS/PC/POM, Plastic |
At a glance
Standard miniature housing with M3 threaded mounting holes |
Optics with standard red LED or bright light LED |
Polarizing filter |
Light/dark switching and sensitivity adjustment via rotary switch possible |
All necessary accessories (BEF-W100-A and P250) are included with delivery (depending on type) |
Your benefits
Highly visible light spot simplifies alignment |
Less contamination due to high optical operating reserve |
Polarization filter allows reliable detection of objects with shiny surfaces and prevents false switching |
M3 threaded mounting holes provide easy installation |
Variants available for reliably detecting clear materials, min. attenuation 20 % |
All necessary accessories (bracket and reflector) are included with delivery, reducing installation and procurement costs (depending on type) |
Product will be phased out and can be ordered until 31.12.2015.
Features | |||
Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
Dimensions (W x H x D): | 11 mm x 31 mm x 20 mm | ||
Housing design (light emission): | Rectangular | ||
Sensing range max.: | 0.01 m ... 3 m 1) | ||
Диапазон измерений: | 0.01 m ... 2.6 m 2) | ||
Type of light: | Visible red light | ||
Источник света: | LED 3) | ||
Длина волны: | 680 nm | ||
Angle of dispersion: | Ca. 4 ° | ||
Focus adjustable: | - | ||
Регулировки: | Potentiometer, 270 ° | ||
Light spot size (distance): | Ø 200 mm (2 m) |
Механика/электроника | |||
Supply voltage: | 10 V DC ... 30 V DC 1) | ||
Пульсации: | ± 10 % 2) | ||
Потребляемая мощность: | ≤ 30 mA 3) | ||
Output type: | NPN, open collector | ||
Режим переключения: | Светлое/темное переключение | ||
Режим переключения селектора: | Manually selectable | ||
Output current Imax.: | ≤ 100 mA | ||
Response time: | ≤ 0.5 ms 4) | ||
Частота переключений: | 1,000 Hz 5) | ||
Attenuation along light beam: | > 20 % | ||
Тип подключения: | Connector M8, 4-pin | ||
Защита цепи: | A, B, D 6)7)8) | ||
Вес: | 9 g | ||
Поляризационный фильтр: | - | ||
Special device: | - | ||
Материал оптики: | PMMA | ||
Enclosure rating: | IP 65 | ||
Special feature: | Detection of transparent objects | ||
Ambient operating temperature: | -25 °C ... +55 °C | ||
Температура хранения: | -40 °C ... +70 °C | ||
Signal voltage NPN HIGH/LOW: | Approx. VS / | ||
Материал корпуса: | ABS/PC/POM, Plastic |
At a glance
Standard miniature housing with M3 threaded mounting holes |
Optics with standard red LED or bright light LED |
Polarizing filter |
Light/dark switching and sensitivity adjustment via rotary switch possible |
All necessary accessories (BEF-W100-A and P250) are included with delivery (depending on type) |
Your benefits
Highly visible light spot simplifies alignment |
Less contamination due to high optical operating reserve |
Polarization filter allows reliable detection of objects with shiny surfaces and prevents false switching |
M3 threaded mounting holes provide easy installation |
Variants available for reliably detecting clear materials, min. attenuation 20 % |
All necessary accessories (bracket and reflector) are included with delivery, reducing installation and procurement costs (depending on type) |
Product will be phased out and can be ordered until 31.12.2015.
Features | |||
Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
Dimensions (W x H x D): | 11 mm x 31 mm x 20 mm | ||
Housing design (light emission): | Rectangular | ||
Sensing range max.: | 0.01 m ... 3 m 1) | ||
Диапазон измерений: | 0.01 m ... 2.6 m 2) | ||
Type of light: | Visible red light | ||
Источник света: | LED 3) | ||
Длина волны: | 680 nm | ||
Angle of dispersion: | Ca. 4 ° | ||
Focus adjustable: | - | ||
Регулировки: | Potentiometer, 270 ° | ||
Light spot size (distance): | Ø 200 mm (2 m) |
Механика/электроника | |||
Supply voltage: | 10 V DC ... 30 V DC 1) | ||
Пульсации: | ± 10 % 2) | ||
Потребляемая мощность: | ≤ 30 mA 3) | ||
Output type: | NPN, open collector | ||
Режим переключения: | Светлое/темное переключение | ||
Режим переключения селектора: | Manually selectable | ||
Output current Imax.: | 100 | ||
Response time: | ≤ 0.5 ms 4) | ||
Частота переключений: | 1,000 5) | ||
Attenuation along light beam: | > 20 % | ||
Тип подключения: | Connector M8, 4-pin | ||
Защита цепи: | A, B, D 6)7)8) | ||
Вес: | 9 g | ||
Поляризационный фильтр: | - | ||
Special device: | - | ||
Материал оптики: | PMMA | ||
Enclosure rating: | IP 65 | ||
Items supplied: | Stainless steel mounting bracket (1.4301/304) BEF-W100-A, Reflector P250 | ||
Special feature: | Detection of transparent objects | ||
Ambient operating temperature: | -25 °C ... +55 °C | ||
Температура хранения: | -40 °C ... +70 °C | ||
Signal voltage NPN HIGH/LOW: | Approx. VS / | ||
Материал корпуса: | ABS/PC/POM, Plastic |
At a glance
Standard miniature housing with M3 threaded mounting holes |
Optics with standard red LED or bright light LED |
Polarizing filter |
Light/dark switching and sensitivity adjustment via rotary switch possible |
All necessary accessories (BEF-W100-A and P250) are included with delivery (depending on type) |
Your benefits
Highly visible light spot simplifies alignment |
Less contamination due to high optical operating reserve |
Polarization filter allows reliable detection of objects with shiny surfaces and prevents false switching |
M3 threaded mounting holes provide easy installation |
Variants available for reliably detecting clear materials, min. attenuation 20 % |
All necessary accessories (bracket and reflector) are included with delivery, reducing installation and procurement costs (depending on type) |
Product will be phased out and can be ordered until 31.12.2015.
Features | |||
Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
Dimensions (W x H x D): | 11 mm x 31 mm x 20 mm | ||
Housing design (light emission): | Rectangular | ||
Sensing range max.: | 0.01 m ... 6 m 1) | ||
Диапазон измерений: | 0.01 m ... 5 m 2) | ||
Type of light: | Visible red light | ||
Источник света: | LED 3) | ||
Длина волны: | 680 nm | ||
Angle of dispersion: | Ca. 4 ° | ||
Focus adjustable: | - | ||
Регулировки: | Potentiometer, 270 ° | ||
Light spot size (distance): | Ø 250 mm (3.5 m) |
Механика/электроника | |||
Supply voltage: | 10 V DC ... 30 V DC 1) | ||
Пульсации: | ± 10 % 2) | ||
Потребляемая мощность: | ≤ 30 mA 3) | ||
Output type: | NPN, open collector | ||
Режим переключения: | Светлое/темное переключение | ||
Режим переключения селектора: | Manually selectable | ||
Output current Imax.: | ≤ 100 mA | ||
Response time: | ≤ 0.5 ms 4) | ||
Частота переключений: | 1,000 Hz 5) | ||
Тип подключения: | Connector M8, 4-pin | ||
Защита цепи: | A, B, D 6)7)8) | ||
Вес: | 9 g | ||
Поляризационный фильтр: | |||
Special device: | - | ||
Материал оптики: | PMMA | ||
Enclosure rating: | IP 65 | ||
Ambient operating temperature: | -25 °C ... +55 °C | ||
Температура хранения: | -40 °C ... +70 °C | ||
Signal voltage NPN HIGH/LOW: | Approx. VS / | ||
Материал корпуса: | ABS/PC/POM, Plastic |
At a glance
Standard miniature housing with M3 threaded mounting holes |
Optics with standard red LED or bright light LED |
Polarizing filter |
Light/dark switching and sensitivity adjustment via rotary switch possible |
All necessary accessories (BEF-W100-A and P250) are included with delivery (depending on type) |
Your benefits
Highly visible light spot simplifies alignment |
Less contamination due to high optical operating reserve |
Polarization filter allows reliable detection of objects with shiny surfaces and prevents false switching |
M3 threaded mounting holes provide easy installation |
Variants available for reliably detecting clear materials, min. attenuation 20 % |
All necessary accessories (bracket and reflector) are included with delivery, reducing installation and procurement costs (depending on type) |
Product will be phased out and can be ordered until 31.12.2015.
Features | |||
Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
Dimensions (W x H x D): | 11 mm x 31 mm x 20 mm | ||
Housing design (light emission): | Rectangular | ||
Sensing range max.: | 0.01 m ... 6 m 1) | ||
Диапазон измерений: | 0.01 m ... 5 m 2) | ||
Type of light: | Visible red light | ||
Источник света: | LED 3) | ||
Длина волны: | 680 nm | ||
Angle of dispersion: | Ca. 4 ° | ||
Focus adjustable: | - | ||
Регулировки: | Potentiometer, 270 ° | ||
Light spot size (distance): | Ø 250 mm (3.5 m) |
Механика/электроника | |||
Supply voltage: | 10 V DC ... 30 V DC 1) | ||
Пульсации: | ± 10 % 2) | ||
Потребляемая мощность: | ≤ 30 mA 3) | ||
Output type: | NPN, open collector | ||
Режим переключения: | Светлое/темное переключение | ||
Режим переключения селектора: | Manually selectable | ||
Output current Imax.: | 100 | ||
Response time: | ≤ 0.5 ms 4) | ||
Частота переключений: | 1,000 5) | ||
Тип подключения: | Connector M8, 4-pin | ||
Защита цепи: | A, B, D 6)7)8) | ||
Вес: | 9 g | ||
Поляризационный фильтр: | |||
Special device: | - | ||
Материал оптики: | PMMA | ||
Enclosure rating: | IP 65 | ||
Items supplied: | Stainless steel mounting bracket (1.4301/304) BEF-W100-A, Reflector P250 | ||
Ambient operating temperature: | -25 °C ... +55 °C | ||
Температура хранения: | -40 °C ... +70 °C | ||
Signal voltage NPN HIGH/LOW: | Approx. VS / | ||
Материал корпуса: | ABS/PC/POM, Plastic |
At a glance
Standard miniature housing with M3 threaded mounting holes |
Optics with standard red LED or bright light LED |
Polarizing filter |
Light/dark switching and sensitivity adjustment via rotary switch possible |
All necessary accessories (BEF-W100-A and P250) are included with delivery (depending on type) |
Your benefits
Highly visible light spot simplifies alignment |
Less contamination due to high optical operating reserve |
Polarization filter allows reliable detection of objects with shiny surfaces and prevents false switching |
M3 threaded mounting holes provide easy installation |
Variants available for reliably detecting clear materials, min. attenuation 20 % |
All necessary accessories (bracket and reflector) are included with delivery, reducing installation and procurement costs (depending on type) |
Product will be phased out and can be ordered until 31.12.2015.
Features | |||
Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
Dimensions (W x H x D): | 11 mm x 31 mm x 20 mm | ||
Housing design (light emission): | Rectangular | ||
Sensing range max.: | 0.01 m ... 6 m 1) | ||
Диапазон измерений: | 0.01 m ... 5 m 2) | ||
Type of light: | Visible red light | ||
Источник света: | LED 3) | ||
Длина волны: | 680 nm | ||
Angle of dispersion: | Ca. 4 ° | ||
Focus adjustable: | - | ||
Light spot size (distance): | Ø 250 mm (3.5 m) |
Механика/электроника | |||
Supply voltage: | 10 V DC ... 30 V DC 1) | ||
Пульсации: | ± 10 % 2) | ||
Потребляемая мощность: | ≤ 30 mA 3) | ||
Output type: | PNP, open collector | ||
Режим переключения: | Dark switching | ||
Output current Imax.: | ≤ 100 mA | ||
Response time: | ≤ 0.5 ms 4) | ||
Частота переключений: | 1,000 Hz 5) | ||
Тип подключения: | Cable, 3-wire, 2 m 6) | ||
Материал кабеля: | PVC | ||
Сечение провода: | 0.18 mm² | ||
Защита цепи: | A, B, D 7)8)9) | ||
Вес: | 53 g | ||
Поляризационный фильтр: | |||
Special device: | - | ||
Материал оптики: | PMMA | ||
Enclosure rating: | IP 65 | ||
Ambient operating temperature: | -25 °C ... +55 °C | ||
Температура хранения: | -40 °C ... +70 °C | ||
Signal voltage PNP HIGH/LOW: | UV - 1,8 V / ca. 0 V | ||
Материал корпуса: | ABS/PC, Plastic |
At a glance
Standard miniature housing with M3 threaded mounting holes |
Optics with standard red LED or bright light LED |
Polarizing filter |
Light/dark switching and sensitivity adjustment via rotary switch possible |
All necessary accessories (BEF-W100-A and P250) are included with delivery (depending on type) |
Your benefits
Highly visible light spot simplifies alignment |
Less contamination due to high optical operating reserve |
Polarization filter allows reliable detection of objects with shiny surfaces and prevents false switching |
M3 threaded mounting holes provide easy installation |
Variants available for reliably detecting clear materials, min. attenuation 20 % |
All necessary accessories (bracket and reflector) are included with delivery, reducing installation and procurement costs (depending on type) |
Product will be phased out and can be ordered until 31.12.2015.
Features | |||
Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
Dimensions (W x H x D): | 11 mm x 31 mm x 20 mm | ||
Housing design (light emission): | Rectangular | ||
Sensing range max.: | 0.01 m ... 6 m 1) | ||
Диапазон измерений: | 0.01 m ... 5 m 2) | ||
Type of light: | Visible red light | ||
Источник света: | LED 3) | ||
Длина волны: | 680 nm | ||
Angle of dispersion: | Ca. 4 ° | ||
Focus adjustable: | - | ||
Light spot size (distance): | Ø 250 mm (3.5 m) |
Механика/электроника | |||
Supply voltage: | 10 V DC ... 30 V DC 1) | ||
Пульсации: | ± 10 % 2) | ||
Потребляемая мощность: | ≤ 30 mA 3) | ||
Output type: | PNP, open collector | ||
Режим переключения: | Dark switching | ||
Output current Imax.: | ≤ 100 mA | ||
Response time: | ≤ 0.5 ms 4) | ||
Частота переключений: | 1,000 Hz 5) | ||
Тип подключения: | Cable, 3-wire, 3 m 6) | ||
Материал кабеля: | PVC | ||
Сечение провода: | 0.18 mm² | ||
Защита цепи: | A, B, D 7)8)9) | ||
Вес: | 53 g | ||
Поляризационный фильтр: | |||
Special device: | |||
Материал оптики: | PMMA | ||
Enclosure rating: | IP 65 | ||
Ambient operating temperature: | -25 °C ... +55 °C | ||
Температура хранения: | -40 °C ... +70 °C | ||
Signal voltage PNP HIGH/LOW: | UV - 1,8 V / ca. 0 V | ||
Материал корпуса: | ABS/PC, Plastic |
At a glance
Standard miniature housing with M3 threaded mounting holes |
Optics with standard red LED or bright light LED |
Polarizing filter |
Light/dark switching and sensitivity adjustment via rotary switch possible |
All necessary accessories (BEF-W100-A and P250) are included with delivery (depending on type) |
Your benefits
Highly visible light spot simplifies alignment |
Less contamination due to high optical operating reserve |
Polarization filter allows reliable detection of objects with shiny surfaces and prevents false switching |
M3 threaded mounting holes provide easy installation |
Variants available for reliably detecting clear materials, min. attenuation 20 % |
All necessary accessories (bracket and reflector) are included with delivery, reducing installation and procurement costs (depending on type) |
Product will be phased out and can be ordered until 31.12.2015.
Features | |||
Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
Dimensions (W x H x D): | 11 mm x 31 mm x 20 mm | ||
Housing design (light emission): | Rectangular | ||
Sensing range max.: | 0.01 m ... 6 m 1) | ||
Диапазон измерений: | 0.01 m ... 5 m 2) | ||
Type of light: | Visible red light | ||
Источник света: | LED 3) | ||
Длина волны: | 680 nm | ||
Angle of dispersion: | Ca. 4 ° | ||
Focus adjustable: | - | ||
Light spot size (distance): | Ø 250 mm (3.5 m) |
Механика/электроника | |||
Supply voltage: | 10 V DC ... 30 V DC 1) | ||
Пульсации: | ± 10 % 2) | ||
Потребляемая мощность: | ≤ 30 mA 3) | ||
Output type: | PNP, open collector | ||
Режим переключения: | Dark switching | ||
Output current Imax.: | 100 | ||
Response time: | ≤ 0.5 ms 4) | ||
Частота переключений: | 1,000 5) | ||
Тип подключения: | Cable, 3-wire, 2 m 6) | ||
Материал кабеля: | PVC | ||
Сечение провода: | 0.18 mm² | ||
Защита цепи: | A, B, D 7)8)9) | ||
Вес: | 53 g | ||
Поляризационный фильтр: | |||
Special device: | - | ||
Материал оптики: | PMMA | ||
Enclosure rating: | IP 65 | ||
Items supplied: | Stainless steel mounting bracket (1.4301/304) BEF-W100-A, Reflector P250 | ||
Ambient operating temperature: | -25 °C ... +55 °C | ||
Температура хранения: | -40 °C ... +70 °C | ||
Signal voltage PNP HIGH/LOW: | UV - 1,8 V / ca. 0 V | ||
Материал корпуса: | ABS/PC, Plastic |
At a glance
Standard miniature housing with M3 threaded mounting holes |
Optics with standard red LED or bright light LED |
Polarizing filter |
Light/dark switching and sensitivity adjustment via rotary switch possible |
All necessary accessories (BEF-W100-A and P250) are included with delivery (depending on type) |
Your benefits
Highly visible light spot simplifies alignment |
Less contamination due to high optical operating reserve |
Polarization filter allows reliable detection of objects with shiny surfaces and prevents false switching |
M3 threaded mounting holes provide easy installation |
Variants available for reliably detecting clear materials, min. attenuation 20 % |
All necessary accessories (bracket and reflector) are included with delivery, reducing installation and procurement costs (depending on type) |
Product will be phased out and can be ordered until 31.12.2015.
Features | |||
Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
Dimensions (W x H x D): | 11 mm x 31 mm x 20 mm | ||
Housing design (light emission): | Rectangular | ||
Sensing range max.: | 0.01 m ... 6 m 1) | ||
Диапазон измерений: | 0.01 m ... 5 m 2) | ||
Type of light: | Visible red light | ||
Источник света: | LED 3) | ||
Длина волны: | 680 nm | ||
Angle of dispersion: | Ca. 4 ° | ||
Focus adjustable: | - | ||
Light spot size (distance): | Ø 250 mm (3.5 m) |
Механика/электроника | |||
Supply voltage: | 10 V DC ... 30 V DC 1) | ||
Пульсации: | ± 10 % 2) | ||
Потребляемая мощность: | ≤ 30 mA 3) | ||
Output type: | PNP, open collector | ||
Режим переключения: | Light switching | ||
Output current Imax.: | ≤ 100 mA | ||
Response time: | ≤ 0.5 ms 4) | ||
Частота переключений: | 1,000 Hz 5) | ||
Тип подключения: | Cable, 3-wire, 2 m 6) | ||
Материал кабеля: | PVC | ||
Сечение провода: | 0.18 mm² | ||
Защита цепи: | A, B, D 7)8)9) | ||
Вес: | 53 g | ||
Поляризационный фильтр: | |||
Special device: | - | ||
Материал оптики: | PMMA | ||
Enclosure rating: | IP 65 | ||
Ambient operating temperature: | -25 °C ... +55 °C | ||
Температура хранения: | -40 °C ... +70 °C | ||
Signal voltage PNP HIGH/LOW: | UV - 1,8 V / ca. 0 V | ||
Материал корпуса: | ABS/PC, Plastic |
At a glance
Standard miniature housing with M3 threaded mounting holes |
Optics with standard red LED or bright light LED |
Polarizing filter |
Light/dark switching and sensitivity adjustment via rotary switch possible |
All necessary accessories (BEF-W100-A and P250) are included with delivery (depending on type) |
Your benefits
Highly visible light spot simplifies alignment |
Less contamination due to high optical operating reserve |
Polarization filter allows reliable detection of objects with shiny surfaces and prevents false switching |
M3 threaded mounting holes provide easy installation |
Variants available for reliably detecting clear materials, min. attenuation 20 % |
All necessary accessories (bracket and reflector) are included with delivery, reducing installation and procurement costs (depending on type) |
Product will be phased out and can be ordered until 31.12.2015.
Features | |||
Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
Dimensions (W x H x D): | 11 mm x 31 mm x 20 mm | ||
Housing design (light emission): | Rectangular | ||
Sensing range max.: | 0.01 m ... 6 m 1) | ||
Диапазон измерений: | 0.01 m ... 5 m 2) | ||
Type of light: | Visible red light | ||
Источник света: | LED 3) | ||
Длина волны: | 680 nm | ||
Angle of dispersion: | Ca. 4 ° | ||
Focus adjustable: | - | ||
Light spot size (distance): | Ø 250 mm (3.5 m) |
Механика/электроника | |||
Supply voltage: | 10 V DC ... 30 V DC 1) | ||
Пульсации: | ± 10 % 2) | ||
Потребляемая мощность: | ≤ 30 mA 3) | ||
Output type: | PNP, open collector | ||
Режим переключения: | Light switching | ||
Output current Imax.: | ≤ 100 mA | ||
Response time: | ≤ 0.5 ms 4) | ||
Частота переключений: | 1,000 Hz 5) | ||
Тип подключения: | Cable with Stocko-connector (MKF-13264), 260 mm 6) | ||
Материал кабеля: | PVC | ||
Защита цепи: | A, B, D 7)8)9) | ||
Вес: | 53 g | ||
Поляризационный фильтр: | |||
Special device: | |||
Материал оптики: | PMMA | ||
Enclosure rating: | IP 65 | ||
Ambient operating temperature: | -25 °C ... +55 °C | ||
Температура хранения: | -40 °C ... +70 °C | ||
Signal voltage PNP HIGH/LOW: | UV - 1,8 V / ca. 0 V | ||
Материал корпуса: | ABS/PC, Plastic |
At a glance
Standard miniature housing with M3 threaded mounting holes |
Optics with standard red LED or bright light LED |
Polarizing filter |
Light/dark switching and sensitivity adjustment via rotary switch possible |
All necessary accessories (BEF-W100-A and P250) are included with delivery (depending on type) |
Your benefits
Highly visible light spot simplifies alignment |
Less contamination due to high optical operating reserve |
Polarization filter allows reliable detection of objects with shiny surfaces and prevents false switching |
M3 threaded mounting holes provide easy installation |
Variants available for reliably detecting clear materials, min. attenuation 20 % |
All necessary accessories (bracket and reflector) are included with delivery, reducing installation and procurement costs (depending on type) |
Product will be phased out and can be ordered until 31.12.2015.
Features | |||
Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
Dimensions (W x H x D): | 11 mm x 31 mm x 20 mm | ||
Housing design (light emission): | Rectangular | ||
Sensing range max.: | 0.01 m ... 6 m 1) | ||
Диапазон измерений: | 0.01 m ... 5 m 2) | ||
Type of light: | Visible red light | ||
Источник света: | LED 3) | ||
Длина волны: | 680 nm | ||
Angle of dispersion: | Ca. 4 ° | ||
Focus adjustable: | - | ||
Light spot size (distance): | Ø 250 mm (3.5 m) |
Механика/электроника | |||
Supply voltage: | 10 V DC ... 30 V DC 1) | ||
Пульсации: | ± 10 % 2) | ||
Потребляемая мощность: | ≤ 30 mA 3) | ||
Output type: | PNP, open collector | ||
Режим переключения: | Light switching | ||
Output current Imax.: | ≤ 100 mA | ||
Response time: | ≤ 0.5 ms 4) | ||
Частота переключений: | 1,000 Hz 5) | ||
Тип подключения: | Cable with connector M8, 3-pin, 200 mm 6) | ||
Материал кабеля: | PVC | ||
Защита цепи: | A, B, D 7)8)9) | ||
Вес: | 53 g | ||
Поляризационный фильтр: | |||
Special device: | |||
Материал оптики: | PMMA | ||
Enclosure rating: | IP 65 | ||
Ambient operating temperature: | -25 °C ... +55 °C | ||
Температура хранения: | -40 °C ... +70 °C | ||
Signal voltage PNP HIGH/LOW: | UV - 1,8 V / ca. 0 V | ||
Материал корпуса: | ABS/PC, Plastic |
At a glance
Standard miniature housing with M3 threaded mounting holes |
Optics with standard red LED or bright light LED |
Polarizing filter |
Light/dark switching and sensitivity adjustment via rotary switch possible |
All necessary accessories (BEF-W100-A and P250) are included with delivery (depending on type) |
Your benefits
Highly visible light spot simplifies alignment |
Less contamination due to high optical operating reserve |
Polarization filter allows reliable detection of objects with shiny surfaces and prevents false switching |
M3 threaded mounting holes provide easy installation |
Variants available for reliably detecting clear materials, min. attenuation 20 % |
All necessary accessories (bracket and reflector) are included with delivery, reducing installation and procurement costs (depending on type) |
Product will be phased out and can be ordered until 31.12.2015.
Features | |||
Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
Dimensions (W x H x D): | 11 mm x 31 mm x 20 mm | ||
Housing design (light emission): | Rectangular | ||
Sensing range max.: | 0.01 m ... 6 m 1) | ||
Диапазон измерений: | 0.01 m ... 5 m 2) | ||
Type of light: | Visible red light | ||
Источник света: | LED 3) | ||
Длина волны: | 680 nm | ||
Angle of dispersion: | Ca. 4 ° | ||
Focus adjustable: | - | ||
Light spot size (distance): | Ø 250 mm (3.5 m) |
Механика/электроника | |||
Supply voltage: | 10 V DC ... 30 V DC 1) | ||
Пульсации: | ± 10 % 2) | ||
Потребляемая мощность: | ≤ 30 mA 3) | ||
Output type: | PNP, open collector | ||
Режим переключения: | Light switching | ||
Output current Imax.: | ≤ 100 mA | ||
Response time: | ≤ 0.5 ms 4) | ||
Частота переключений: | 1,000 Hz 5) | ||
Тип подключения: | Cable, 3-wire, 3 m 6) | ||
Материал кабеля: | PVC | ||
Сечение провода: | 0.18 mm² | ||
Защита цепи: | A, B, D 7)8)9) | ||
Вес: | 53 g | ||
Поляризационный фильтр: | |||
Special device: | |||
Материал оптики: | PMMA | ||
Enclosure rating: | IP 65 | ||
Ambient operating temperature: | -25 °C ... +55 °C | ||
Температура хранения: | -40 °C ... +70 °C | ||
Signal voltage PNP HIGH/LOW: | UV - 1,8 V / ca. 0 V | ||
Материал корпуса: | ABS/PC, Plastic |
At a glance
Standard miniature housing with M3 threaded mounting holes |
Optics with standard red LED or bright light LED |
Polarizing filter |
Light/dark switching and sensitivity adjustment via rotary switch possible |
All necessary accessories (BEF-W100-A and P250) are included with delivery (depending on type) |
Your benefits
Highly visible light spot simplifies alignment |
Less contamination due to high optical operating reserve |
Polarization filter allows reliable detection of objects with shiny surfaces and prevents false switching |
M3 threaded mounting holes provide easy installation |
Variants available for reliably detecting clear materials, min. attenuation 20 % |
All necessary accessories (bracket and reflector) are included with delivery, reducing installation and procurement costs (depending on type) |
Product will be phased out and can be ordered until 31.12.2015.
Features | |||
Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
Dimensions (W x H x D): | 11 mm x 31 mm x 20 mm | ||
Housing design (light emission): | Rectangular | ||
Sensing range max.: | 0.01 m ... 6 m 1) | ||
Диапазон измерений: | 0.01 m ... 5 m 2) | ||
Type of light: | Visible red light | ||
Источник света: | LED 3) | ||
Длина волны: | 680 nm | ||
Angle of dispersion: | Ca. 4 ° | ||
Focus adjustable: | - | ||
Light spot size (distance): | Ø 250 mm (3.5 m) |
Механика/электроника | |||
Supply voltage: | 10 V DC ... 30 V DC 1) | ||
Пульсации: | ± 10 % 2) | ||
Потребляемая мощность: | ≤ 30 mA 3) | ||
Output type: | PNP, open collector | ||
Режим переключения: | Light switching | ||
Output current Imax.: | ≤ 100 mA | ||
Response time: | ≤ 0.5 ms 4) | ||
Частота переключений: | 1,000 Hz 5) | ||
Тип подключения: | Cable, 3-wire, 5 m 6) | ||
Материал кабеля: | PVC | ||
Сечение провода: | 0.18 mm² | ||
Защита цепи: | A, B, D 7)8)9) | ||
Вес: | 53 g | ||
Поляризационный фильтр: | |||
Special device: | |||
Материал оптики: | PMMA | ||
Enclosure rating: | IP 65 | ||
Ambient operating temperature: | -25 °C ... +55 °C | ||
Температура хранения: | -40 °C ... +70 °C | ||
Signal voltage PNP HIGH/LOW: | UV - 1,8 V / ca. 0 V | ||
Материал корпуса: | ABS/PC, Plastic |
At a glance
Standard miniature housing with M3 threaded mounting holes |
Optics with standard red LED or bright light LED |
Polarizing filter |
Light/dark switching and sensitivity adjustment via rotary switch possible |
All necessary accessories (BEF-W100-A and P250) are included with delivery (depending on type) |
Your benefits
Highly visible light spot simplifies alignment |
Less contamination due to high optical operating reserve |
Polarization filter allows reliable detection of objects with shiny surfaces and prevents false switching |
M3 threaded mounting holes provide easy installation |
Variants available for reliably detecting clear materials, min. attenuation 20 % |
All necessary accessories (bracket and reflector) are included with delivery, reducing installation and procurement costs (depending on type) |
Product will be phased out and can be ordered until 31.12.2015.
Features | |||
Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
Dimensions (W x H x D): | 11 mm x 31 mm x 20 mm | ||
Housing design (light emission): | Rectangular | ||
Sensing range max.: | 0.01 m ... 6 m 1) | ||
Диапазон измерений: | 0.01 m ... 5 m 2) | ||
Type of light: | Visible red light | ||
Источник света: | LED 3) | ||
Длина волны: | 680 nm | ||
Angle of dispersion: | Ca. 4 ° | ||
Focus adjustable: | - | ||
Light spot size (distance): | Ø 250 mm (3.5 m) |
Механика/электроника | |||
Supply voltage: | 10 V DC ... 30 V DC 1) | ||
Пульсации: | ± 10 % 2) | ||
Потребляемая мощность: | ≤ 30 mA 3) | ||
Output type: | PNP, open collector | ||
Режим переключения: | Light switching | ||
Output current Imax.: | ≤ 100 mA | ||
Response time: | ≤ 0.5 ms 4) | ||
Частота переключений: | 1,000 Hz 5) | ||
Тип подключения: | Cable with Combicon-plug (QC0,5/3ST-3,81), 850 mm 6) | ||
Материал кабеля: | PVC | ||
Защита цепи: | A, B, D 7)8)9) | ||
Вес: | 53 g | ||
Поляризационный фильтр: | |||
Special device: | |||
Материал оптики: | PMMA | ||
Enclosure rating: | IP 65 | ||
Ambient operating temperature: | -30 °C ... +55 °C | ||
Температура хранения: | -40 °C ... +70 °C | ||
Signal voltage PNP HIGH/LOW: | UV - 1,8 V / ca. 0 V | ||
Материал корпуса: | ABS/PC, Plastic |
At a glance
Standard miniature housing with M3 threaded mounting holes |
Optics with standard red LED or bright light LED |
Polarizing filter |
Light/dark switching and sensitivity adjustment via rotary switch possible |
All necessary accessories (BEF-W100-A and P250) are included with delivery (depending on type) |
Your benefits
Highly visible light spot simplifies alignment |
Less contamination due to high optical operating reserve |
Polarization filter allows reliable detection of objects with shiny surfaces and prevents false switching |
M3 threaded mounting holes provide easy installation |
Variants available for reliably detecting clear materials, min. attenuation 20 % |
All necessary accessories (bracket and reflector) are included with delivery, reducing installation and procurement costs (depending on type) |
Product will be phased out and can be ordered until 31.12.2015.
Features | |||
Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
Dimensions (W x H x D): | 11 mm x 31 mm x 20 mm | ||
Housing design (light emission): | Rectangular | ||
Sensing range max.: | 0.01 m ... 6 m 1) | ||
Диапазон измерений: | 0.01 m ... 5 m 2) | ||
Type of light: | Visible red light | ||
Источник света: | LED 3) | ||
Длина волны: | 680 nm | ||
Angle of dispersion: | Ca. 4 ° | ||
Focus adjustable: | - | ||
Light spot size (distance): | Ø 250 mm (3.5 m) |
Механика/электроника | |||
Supply voltage: | 10 V DC ... 30 V DC 1) | ||
Пульсации: | ± 10 % 2) | ||
Потребляемая мощность: | ≤ 30 mA 3) | ||
Output type: | PNP, open collector | ||
Режим переключения: | Light switching | ||
Output current Imax.: | ≤ 100 mA | ||
Response time: | ≤ 0.5 ms 4) | ||
Частота переключений: | 1,000 Hz 5) | ||
Тип подключения: | Cable with connector M12, 4-pin, 290 mm 6) | ||
Материал кабеля: | PVC | ||
Защита цепи: | A, B, D 7)8)9) | ||
Вес: | 53 g | ||
Поляризационный фильтр: | |||
Special device: | |||
Материал оптики: | PMMA | ||
Enclosure rating: | IP 65 | ||
Ambient operating temperature: | -30 °C ... +55 °C | ||
Температура хранения: | -40 °C ... +70 °C | ||
Signal voltage PNP HIGH/LOW: | UV - 1,8 V / ca. 0 V | ||
Материал корпуса: | ABS/PC, Plastic |
At a glance
Standard miniature housing with M3 threaded mounting holes |
Optics with standard red LED or bright light LED |
Polarizing filter |
Light/dark switching and sensitivity adjustment via rotary switch possible |
All necessary accessories (BEF-W100-A and P250) are included with delivery (depending on type) |
Your benefits
Highly visible light spot simplifies alignment |
Less contamination due to high optical operating reserve |
Polarization filter allows reliable detection of objects with shiny surfaces and prevents false switching |
M3 threaded mounting holes provide easy installation |
Variants available for reliably detecting clear materials, min. attenuation 20 % |
All necessary accessories (bracket and reflector) are included with delivery, reducing installation and procurement costs (depending on type) |
Product will be phased out and can be ordered until 31.12.2015.
Features | |||
Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
Dimensions (W x H x D): | 11 mm x 31 mm x 20 mm | ||
Housing design (light emission): | Rectangular | ||
Sensing range max.: | 0.01 m ... 6 m 1) | ||
Диапазон измерений: | 0.01 m ... 5 m 2) | ||
Type of light: | Visible red light | ||
Источник света: | LED 3) | ||
Длина волны: | 680 nm | ||
Angle of dispersion: | Ca. 4 ° | ||
Focus adjustable: | - | ||
Light spot size (distance): | Ø 250 mm (3.5 m) |
Механика/электроника | |||
Supply voltage: | 10 V DC ... 30 V DC 1) | ||
Пульсации: | ± 10 % 2) | ||
Потребляемая мощность: | ≤ 30 mA 3) | ||
Output type: | PNP, open collector | ||
Режим переключения: | Light switching | ||
Output current Imax.: | ≤ 100 mA | ||
Response time: | ≤ 0.5 ms 4) | ||
Частота переключений: | 1,000 Hz 5) | ||
Тип подключения: | Cable with MOLEX-connector, 1.2 m 6) | ||
Материал кабеля: | PVC | ||
Защита цепи: | A, B, D 7)8)9) | ||
Вес: | 53 g | ||
Поляризационный фильтр: | |||
Special device: | |||
Материал оптики: | PMMA | ||
Enclosure rating: | IP 65 | ||
Ambient operating temperature: | -25 °C ... +55 °C | ||
Температура хранения: | -40 °C ... +70 °C | ||
Signal voltage PNP HIGH/LOW: | UV - 1,8 V / ca. 0 V | ||
Материал корпуса: | ABS/PC, Plastic |
At a glance
Standard miniature housing with M3 threaded mounting holes |
Optics with standard red LED or bright light LED |
Polarizing filter |
Light/dark switching and sensitivity adjustment via rotary switch possible |
All necessary accessories (BEF-W100-A and P250) are included with delivery (depending on type) |
Your benefits
Highly visible light spot simplifies alignment |
Less contamination due to high optical operating reserve |
Polarization filter allows reliable detection of objects with shiny surfaces and prevents false switching |
M3 threaded mounting holes provide easy installation |
Variants available for reliably detecting clear materials, min. attenuation 20 % |
All necessary accessories (bracket and reflector) are included with delivery, reducing installation and procurement costs (depending on type) |
Product will be phased out and can be ordered until 31.12.2015.
Features | |||
Sensor/detection principle: | Photoelectric retro-reflective sensor, Standard optics | ||
Dimensions (W x H x D): | 11 mm x 31 mm x 20 mm | ||
Housing design (light emission): | Rectangular | ||
Sensing range max.: | 0.01 m ... 6 m 1) | ||
Диапазон измерений: | 0.01 m ... 5 m 2) | ||
Type of light: | Visible red light | ||
Источник света: | LED 3) | ||
Длина волны: | 680 nm | ||
Angle of dispersion: | Ca. 4 ° | ||
Focus adjustable: | - | ||
Light spot size (distance): | Ø 250 mm (3.5 m) |
Механика/электроника | |||
Supply voltage: | 10 V DC ... 30 V DC 1) | ||
Пульсации: | ± 10 % 2) | ||
Потребляемая мощность: | ≤ 30 mA 3) | ||
Output type: | PNP, open collector | ||
Режим переключения: | Light switching | ||
Output current Imax.: | 100 | ||
Response time: | ≤ 0.5 ms 4) | ||
Частота переключений: | 1,000 5) | ||
Тип подключения: | Cable, 3-wire, 2 m 6) | ||
Материал кабеля: | PVC | ||
Сечение провода: | 0.18 mm² | ||
Защита цепи: | A, B, D 7)8)9) | ||
Вес: | 53 g | ||
Поляризационный фильтр: | |||
Special device: | - | ||
Материал оптики: | PMMA | ||
Enclosure rating: | IP 65 | ||
Items supplied: | Stainless steel mounting bracket (1.4301/304) BEF-W100-A, Reflector P250 | ||
Ambient operating temperature: | -25 °C ... +55 °C | ||
Температура хранения: | -40 °C ... +70 °C | ||
Signal voltage PNP HIGH/LOW: | UV - 1,8 V / ca. 0 V | ||
Материал корпуса: | ABS/PC, Plastic |