At a glance
| Selectable response time up to 16 µs |
| Sensing range up to 20 m, sensing distance up to 1400 mm |
| Bus-compatible with anti-interference |
| 2 x 4-digit display |
| Adjustable hysteresis |
| Rotatable display screen |
| High-resolution signal processing |
| Programmable time delays |
Your benefits
| Reliable, rapid process detection, even under the most difficult ambient conditions, such as dust, spray or mist |
| Easy commissioning and product changeover due to external teach-in |
| Cross-talk is eliminated when utilizing bus configuration option |
| Quick, easy setup and adjustment due to an intuitive operating menu |
| Flexible parameter adjustment due to high-resolution signal processing. Hysteresis and time delays can be adapted to suit the application, e.g., when detecting tiny or transparent objects |
| Easy-to-read display, even under difficult installation conditions |
| Features | |||
| Тип устройства: | Expansion unit | ||
| Dimensions (W x H x D): | 10.5 mm x 34.6 mm x 71.9 mm | ||
| Sensing range max.: | 0 m ... 20 m, through-beam system 1)2) | ||
| Диапазон измерений: | 0 ... 18 m, through-beam system, 0 mm ... 1,400 mm, proximity system 3)4)5)6) | ||
| Источник света: | LED 7) | ||
| Type of light: | Visible red light | ||
| Длина волны: | 650 nm | ||
| Регулировка чувствительности: | Teach-in button cable +/- increment button, manual |
||
| Adjustment of operating distance: | Cable, +/- increment button, manual, Teach-in button | ||
| Teach-in: | Menu-controlled | ||
| Time type: | Without time delay time delay off switch on delay ON and OFF delay one shot |
||
| Время задержки: | Programmable: 0 ... 9,999 ms | ||
| Индикатор: | Display | ||
| Sensor/detection principle: | Fiber-optic photoelectric sensor | ||
| Angle of dispersion: | Ca. 65 ° | ||
| Housing design (light emission): | Rectangular | ||
| Display: | LED status display / 2x 4-character digital dual displays, Set value (green indicator) and actual value (red indicator) are displayed simultaneously, display of parameters | ||
| Механика/электроника | |||
| Enclosure rating: | IP 50 1) | ||
| Supply voltage: | 12 V DC ... 24 V DC 2) | ||
| Пульсации: | ≤ 10 % 3) | ||
| Потребляемая мощность: | ≤ 50 mA 4) | ||
| Output type: | NPN, Light/dark-switching, manually selectable, open collector | ||
| Output current Imax.: | ≤ 100 mA | ||
| Response time: | ≤ 2 ms ≤ 8 ms ≤ 16 µs ≤ 70 µs ≤ 250 µs 5) |
||
| Частота переключений: | 31.2 kHz 7.1 kHz 2 kHz 250 Hz 62.5 Hz |
||
| Тип подключения: | Cable, 2-wire, 2 m 6) | ||
| Материал кабеля: | PVC | ||
| Сечение провода: | 0.2 mm² | ||
| Класс защиты: | III | ||
| Защита цепи: | A, B, C, D 7)8)9)10) | ||
| Special device: | 0 | ||
| Материал корпуса: | ABS/PC | ||
| Ambient operating temperature: | -25 °C ... 55 °C 11) | ||
| Температура хранения: | -40 °C ... 70 °C | ||
At a glance
| Selectable response time up to 16 µs |
| Sensing range up to 20 m, sensing distance up to 1400 mm |
| Bus-compatible with anti-interference |
| 2 x 4-digit display |
| Adjustable hysteresis |
| Rotatable display screen |
| High-resolution signal processing |
| Programmable time delays |
Your benefits
| Reliable, rapid process detection, even under the most difficult ambient conditions, such as dust, spray or mist |
| Easy commissioning and product changeover due to external teach-in |
| Cross-talk is eliminated when utilizing bus configuration option |
| Quick, easy setup and adjustment due to an intuitive operating menu |
| Flexible parameter adjustment due to high-resolution signal processing. Hysteresis and time delays can be adapted to suit the application, e.g., when detecting tiny or transparent objects |
| Easy-to-read display, even under difficult installation conditions |
| Features | |||
| Тип устройства: | Expansion unit | ||
| Dimensions (W x H x D): | 10.5 mm x 34.6 mm x 71.9 mm | ||
| Sensing range max.: | 0 m ... 20 m, through-beam system 1)2) | ||
| Диапазон измерений: | 0 ... 18 m, through-beam system, 0 mm ... 1,400 mm, proximity system 3)4)5)6) | ||
| Источник света: | LED 7) | ||
| Type of light: | Visible red light | ||
| Длина волны: | 650 nm | ||
| Регулировка чувствительности: | Teach-in button cable +/- increment button, manual |
||
| Adjustment of operating distance: | Cable, +/- increment button, manual, Teach-in button | ||
| Teach-in: | Menu-controlled | ||
| Time type: | Without time delay time delay off switch on delay ON and OFF delay one shot |
||
| Время задержки: | Programmable: 0 ... 9,999 ms | ||
| Индикатор: | Display | ||
| Sensor/detection principle: | Fiber-optic photoelectric sensor | ||
| Angle of dispersion: | Ca. 65 ° | ||
| Housing design (light emission): | Rectangular | ||
| Display: | LED status display / 2x 4-character digital dual displays, Set value (green indicator) and actual value (red indicator) are displayed simultaneously, display of parameters | ||
| Механика/электроника | |||
| Enclosure rating: | IP 50 1) | ||
| Supply voltage: | 12 V DC ... 24 V DC 2) | ||
| Пульсации: | ≤ 10 % 3) | ||
| Потребляемая мощность: | ≤ 50 mA 4) | ||
| Output type: | NPN, Light/dark-switching, manually selectable, open collector | ||
| Output current Imax.: | ≤ 100 mA | ||
| Response time: | ≤ 2 ms ≤ 8 ms ≤ 16 µs ≤ 70 µs ≤ 250 µs 5) |
||
| Частота переключений: | 31.2 kHz 7.1 kHz 2 kHz 250 Hz 62.5 Hz |
||
| Тип подключения: | Connector M8, 4-pin | ||
| Класс защиты: | III | ||
| Защита цепи: | A, B, C, D 6)7)8)9) | ||
| Special device: | 0 | ||
| Материал корпуса: | ABS/PC | ||
| Ambient operating temperature: | -25 °C ... 55 °C 10) | ||
| Температура хранения: | -40 °C ... 70 °C | ||
At a glance
| Selectable response time up to 16 µs |
| Sensing range up to 20 m (Through-beam system); up to 1400 mm (proximity system) |
| Bus-compatible with anti-interference |
| 2 x 4-digit display |
| Adjustable hysteresis |
| Rotatable display screen |
| High-resolution signal processing |
| Programmable time delays |
Your benefits
| Reliable, rapid process detection, even under the most difficult ambient conditions, such as dust, spray or mist |
| Easy commissioning and product changeover due to external teach-in |
| Cross-talk is eliminated when utilizing bus configuration option |
| Quick, easy setup and adjustment due to an intuitive operating menu |
| Flexible parameter adjustment due to high-resolution signal processing. Hysteresis and time delays can be adapted to suit the application, e.g., when detecting tiny or transparent objects |
| Easy-to-read display, even under difficult installation conditions |
| Features | |||
| Тип устройства: | Expansion unit | ||
| Dimensions (W x H x D): | 10.5 mm x 34.6 mm x 71.9 mm | ||
| Sensing range max.: | 0 m ... 20 m, through-beam system 1)2) | ||
| Диапазон измерений: | 0 m ... 18 m, through-beam system, 0 mm ... 1,400 mm, proximity system 3)4)5)6) | ||
| Источник света: | LED 7) | ||
| Type of light: | Visible red light | ||
| Длина волны: | 650 nm | ||
| Регулировки: | Single teach-in button, Cable, Menu-controlled | ||
| Time type: | Without time delay time delay off switch on delay ON and OFF delay one shot |
||
| Время задержки: | Programmable, 0 ms, 9,999 ms | ||
| Индикатор: | Display | ||
| Sensor/detection principle: | Fiber-optic photoelectric sensor | ||
| Angle of dispersion: | Ca. 65 ° | ||
| Housing design (light emission): | Rectangular | ||
| Display: | LED status display / 2x 4-character digital dual displays, Set value (green indicator) and actual value (red indicator) are displayed simultaneously, display of parameters | ||
| Фокус: | See LL3 fiber-optic data | ||
| Механика/электроника | |||
| Enclosure rating: | IP 50 1) | ||
| Supply voltage: | 12 V DC ... 24 V DC 2) | ||
| Пульсации: | ≤ 10 % 3) | ||
| Потребляемая мощность: | ≤ 50 mA 4) | ||
| Output type: | 2 x NPN, open collector | ||
| Output current Imax.: | ≤ 100 mA | ||
| Response time: | ≤ 2 ms ≤ 8 ms ≤ 16 µs ≤ 70 µs ≤ 250 µs 5) |
||
| Частота переключений: | 31.2 kHz 7.1 kHz 2 kHz 250 Hz 62.5 Hz |
||
| Тип подключения: | Cable, 2-wire, 2 m 6) | ||
| Материал кабеля: | PVC | ||
| Сечение провода: | 0.2 mm² | ||
| Класс защиты: | III | ||
| Защита цепи: | A, B, C, D 7)8)9)10) | ||
| Special device: | 0 | ||
| Ambient operating temperature: | -25 °C ... +55 °C 11) | ||
| Температура хранения: | -40 °C ... +70 °C | ||
| Вес: | 25 g | ||
| Режим переключения: | Светлое/темное переключение | ||
| Режим переключения селектора: | Manually selectable | ||
| UL File No.: | NRKH2.E300503 & NRKH8.E300503 | ||
| Материал корпуса: | ABS/PC, Plastic | ||
At a glance
| Selectable response time up to 16 µs |
| Sensing range up to 20 m, sensing distance up to 1400 mm |
| Bus-compatible with anti-interference |
| 2 x 4-digit display |
| Adjustable hysteresis |
| Rotatable display screen |
| High-resolution signal processing |
| Programmable time delays |
Your benefits
| Reliable, rapid process detection, even under the most difficult ambient conditions, such as dust, spray or mist |
| Easy commissioning and product changeover due to external teach-in |
| Cross-talk is eliminated when utilizing bus configuration option |
| Quick, easy setup and adjustment due to an intuitive operating menu |
| Flexible parameter adjustment due to high-resolution signal processing. Hysteresis and time delays can be adapted to suit the application, e.g., when detecting tiny or transparent objects |
| Easy-to-read display, even under difficult installation conditions |
| Features | |||
| Тип устройства: | Expansion unit | ||
| Dimensions (W x H x D): | 10.5 mm x 34.6 mm x 71.9 mm | ||
| Sensing range max.: | 0 m ... 20 m, through-beam system 1)2) | ||
| Диапазон измерений: | 0 ... 18 m, through-beam system, 0 mm ... 1,400 mm, proximity system 3)4)5)6) | ||
| Источник света: | LED 7) | ||
| Type of light: | Visible red light | ||
| Длина волны: | 650 nm | ||
| Регулировка чувствительности: | Teach-in button cable +/- increment button, manual |
||
| Adjustment of operating distance: | Cable, +/- increment button, manual, Teach-in button | ||
| Teach-in: | Menu-controlled | ||
| Time type: | Without time delay time delay off switch on delay ON and OFF delay one shot |
||
| Время задержки: | Programmable: 0 ... 9,999 ms | ||
| Индикатор: | Display | ||
| Sensor/detection principle: | Fiber-optic photoelectric sensor | ||
| Angle of dispersion: | Ca. 65 ° | ||
| Housing design (light emission): | Rectangular | ||
| Display: | LED status display / 2x 4-character digital dual displays, Set value (green indicator) and actual value (red indicator) are displayed simultaneously, display of parameters | ||
| Механика/электроника | |||
| Enclosure rating: | IP 50 1) | ||
| Supply voltage: | 12 V DC ... 24 V DC 2) | ||
| Пульсации: | ≤ 10 % 3) | ||
| Потребляемая мощность: | ≤ 50 mA 4) | ||
| Output type: | PNP, Light/dark-switching, manually selectable, open collector | ||
| Output current Imax.: | ≤ 100 mA | ||
| Response time: | ≤ 2 ms ≤ 8 ms ≤ 16 µs ≤ 70 µs ≤ 250 µs 5) |
||
| Частота переключений: | 31.2 kHz 7.1 kHz 2 kHz 250 Hz 62.5 Hz |
||
| Тип подключения: | Cable, 2-wire, 2 m 6) | ||
| Материал кабеля: | PVC | ||
| Сечение провода: | 0.2 mm² | ||
| Класс защиты: | III | ||
| Защита цепи: | A, B, C, D 7)8)9)10) | ||
| Special device: | 0 | ||
| Материал корпуса: | ABS/PC | ||
| Ambient operating temperature: | -25 °C ... 55 °C 11) | ||
| Температура хранения: | -40 °C ... 70 °C | ||
At a glance
| Selectable response time up to 16 µs |
| Sensing range up to 20 m, sensing distance up to 1400 mm |
| Bus-compatible with anti-interference |
| 2 x 4-digit display |
| Adjustable hysteresis |
| Rotatable display screen |
| High-resolution signal processing |
| Programmable time delays |
Your benefits
| Reliable, rapid process detection, even under the most difficult ambient conditions, such as dust, spray or mist |
| Easy commissioning and product changeover due to external teach-in |
| Cross-talk is eliminated when utilizing bus configuration option |
| Quick, easy setup and adjustment due to an intuitive operating menu |
| Flexible parameter adjustment due to high-resolution signal processing. Hysteresis and time delays can be adapted to suit the application, e.g., when detecting tiny or transparent objects |
| Easy-to-read display, even under difficult installation conditions |
| Features | |||
| Тип устройства: | Expansion unit | ||
| Dimensions (W x H x D): | 10.5 mm x 34.6 mm x 71.9 mm | ||
| Sensing range max.: | 0 m ... 20 m, through-beam system 1)2) | ||
| Диапазон измерений: | 0 mm ... 1,400 mm, proximity system 3)4) | ||
| Источник света: | LED 5) | ||
| Type of light: | Visible red light | ||
| Длина волны: | 650 nm | ||
| Регулировка чувствительности: | Teach |
||
| Adjustment of operating distance: | Teach | ||
| Teach-in: | Menu-controlled | ||
| Time type: | Without time delay time delay off switch on delay ON and OFF delay one shot |
||
| Время задержки: | Programmable: 0 ... 9,999 ms | ||
| Индикатор: | Display | ||
| Sensor/detection principle: | Fiber-optic photoelectric sensor | ||
| Angle of dispersion: | Ca. 65 ° | ||
| Housing design (light emission): | Rectangular | ||
| Display: | LED status display / 2x 4-character digital dual displays, Set value (green indicator) and actual value (red indicator) are displayed simultaneously, display of parameters | ||
| Механика/электроника | |||
| Enclosure rating: | IP 50 1) | ||
| Supply voltage: | 12 V DC ... 24 V DC 2) | ||
| Пульсации: | ≤ 10 % 3) | ||
| Потребляемая мощность: | ≤ 50 mA 4) | ||
| Output type: | PNP, Light/dark-switching, manually selectable, open collector | ||
| Output current Imax.: | ≤ 100 mA | ||
| Response time: | ≤ 2 ms ≤ 8 ms ≤ 16 µs ≤ 70 µs ≤ 250 µs 5) |
||
| Частота переключений: | 31.2 kHz 7.1 kHz 2 kHz 250 Hz 62.5 Hz |
||
| Тип подключения: | Cable, 2-wire, 2 m 6) | ||
| Класс защиты: | III | ||
| Защита цепи: | A, B, C, D 7)8)9)10) | ||
| Special device: | 1 | ||
| Материал корпуса: | ABS/PC | ||
| Ambient operating temperature: | -25 °C ... 55 °C 11) | ||
| Температура хранения: | -25 °C ... 70 °C | ||
| Special features: | Switching frequency with object: 90.9 Hz | ||
At a glance
| Selectable response time up to 16 µs |
| Sensing range up to 20 m, sensing distance up to 1400 mm |
| Bus-compatible with anti-interference |
| 2 x 4-digit display |
| Adjustable hysteresis |
| Rotatable display screen |
| High-resolution signal processing |
| Programmable time delays |
Your benefits
| Reliable, rapid process detection, even under the most difficult ambient conditions, such as dust, spray or mist |
| Easy commissioning and product changeover due to external teach-in |
| Cross-talk is eliminated when utilizing bus configuration option |
| Quick, easy setup and adjustment due to an intuitive operating menu |
| Flexible parameter adjustment due to high-resolution signal processing. Hysteresis and time delays can be adapted to suit the application, e.g., when detecting tiny or transparent objects |
| Easy-to-read display, even under difficult installation conditions |
| Features | |||
| Тип устройства: | Expansion unit | ||
| Dimensions (W x H x D): | 10.5 mm x 34.6 mm x 71.9 mm | ||
| Sensing range max.: | 0 m ... 20 m, through-beam system 1)2) | ||
| Диапазон измерений: | 0 ... 18 m, through-beam system, 0 mm ... 1,400 mm, proximity system 3)4)5)6) | ||
| Источник света: | LED 7) | ||
| Type of light: | Visible red light | ||
| Длина волны: | 650 nm | ||
| Регулировка чувствительности: | Teach-in button cable +/- increment button, manual |
||
| Adjustment of operating distance: | Cable, +/- increment button, manual, Teach-in button | ||
| Teach-in: | Menu-controlled | ||
| Time type: | Without time delay time delay off switch on delay ON and OFF delay one shot |
||
| Время задержки: | Programmable: 0 ... 9,999 ms | ||
| Индикатор: | Display | ||
| Sensor/detection principle: | Fiber-optic photoelectric sensor | ||
| Angle of dispersion: | Ca. 65 ° | ||
| Housing design (light emission): | Rectangular | ||
| Display: | LED status display / 2x 4-character digital dual displays, Set value (green indicator) and actual value (red indicator) are displayed simultaneously, display of parameters | ||
| Механика/электроника | |||
| Enclosure rating: | IP 50 1) | ||
| Supply voltage: | 12 V DC ... 24 V DC 2) | ||
| Пульсации: | ≤ 10 % 3) | ||
| Потребляемая мощность: | ≤ 50 mA 4) | ||
| Output type: | PNP, Light/dark-switching, manually selectable, open collector | ||
| Output current Imax.: | ≤ 100 mA | ||
| Response time: | ≤ 2 ms ≤ 8 ms ≤ 16 µs ≤ 70 µs ≤ 250 µs 5) |
||
| Частота переключений: | 31.2 kHz 7.1 kHz 2 kHz 250 Hz 62.5 Hz |
||
| Тип подключения: | Connector M8, 3-pin | ||
| Класс защиты: | III | ||
| Защита цепи: | A, B, C, D 6)7)8)9) | ||
| Special device: | 0 | ||
| Материал корпуса: | ABS/PC | ||
| Ambient operating temperature: | -25 °C ... 55 °C 10) | ||
| Температура хранения: | -40 °C ... 70 °C | ||
At a glance
| Selectable response time up to 16 µs |
| Sensing range up to 20 m, sensing distance up to 1400 mm |
| Bus-compatible with anti-interference |
| 2 x 4-digit display |
| Adjustable hysteresis |
| Rotatable display screen |
| High-resolution signal processing |
| Programmable time delays |
Your benefits
| Reliable, rapid process detection, even under the most difficult ambient conditions, such as dust, spray or mist |
| Easy commissioning and product changeover due to external teach-in |
| Cross-talk is eliminated when utilizing bus configuration option |
| Quick, easy setup and adjustment due to an intuitive operating menu |
| Flexible parameter adjustment due to high-resolution signal processing. Hysteresis and time delays can be adapted to suit the application, e.g., when detecting tiny or transparent objects |
| Easy-to-read display, even under difficult installation conditions |
| Features | |||
| Тип устройства: | Expansion unit | ||
| Dimensions (W x H x D): | 10.5 mm x 34.6 mm x 71.9 mm | ||
| Sensing range max.: | 0 m ... 20 m, through-beam system 1)2) | ||
| Диапазон измерений: | 0 mm ... 1,400 mm, proximity system 3)4) | ||
| Источник света: | LED 5) | ||
| Type of light: | Visible red light | ||
| Длина волны: | 650 nm | ||
| Регулировка чувствительности: | Teach-in button cable +/- increment button, manual |
||
| Adjustment of operating distance: | Cable, +/- increment button, manual, Teach-in button | ||
| Teach-in: | Menu-controlled | ||
| Time type: | Without time delay time delay off switch on delay ON and OFF delay one shot |
||
| Время задержки: | Programmable: 0 ... 9,999 ms | ||
| Индикатор: | Display | ||
| Sensor/detection principle: | Fiber-optic photoelectric sensor | ||
| Angle of dispersion: | Ca. 65 ° | ||
| Housing design (light emission): | Rectangular | ||
| Display: | LED status display / 2x 4-character digital dual displays, Set value (green indicator) and actual value (red indicator) are displayed simultaneously, display of parameters | ||
| Механика/электроника | |||
| Enclosure rating: | IP 50 1) | ||
| Supply voltage: | 12 V DC ... 24 V DC 2) | ||
| Пульсации: | ≤ 10 % 3) | ||
| Потребляемая мощность: | ≤ 50 mA 4) | ||
| Output type: | PNP, Light/dark-switching, manually selectable, open collector | ||
| Output current Imax.: | ≤ 100 mA | ||
| Response time: | ≤ 2 ms ≤ 8 ms ≤ 16 µs ≤ 70 µs ≤ 250 µs 5) |
||
| Частота переключений: | 31.2 kHz 7.1 kHz 2 kHz 250 Hz 62.5 Hz |
||
| Тип подключения: | Cable with plug, M8, 3-pin, 0.2 m 6) | ||
| Класс защиты: | III | ||
| Защита цепи: | A, B, C, D 7)8)9)10) | ||
| Special device: | 1 | ||
| Материал корпуса: | ABS/PC | ||
| Ambient operating temperature: | -25 °C ... 55 °C 11) | ||
| Температура хранения: | -25 °C ... 70 °C | ||
| Special features: | M8, 3-pin, 200 mm Pigtail | ||
At a glance
| Selectable response time up to 16 µs |
| Sensing range up to 20 m, sensing distance up to 1400 mm |
| Bus-compatible with anti-interference |
| 2 x 4-digit display |
| Adjustable hysteresis |
| Rotatable display screen |
| High-resolution signal processing |
| Programmable time delays |
Your benefits
| Reliable, rapid process detection, even under the most difficult ambient conditions, such as dust, spray or mist |
| Easy commissioning and product changeover due to external teach-in |
| Cross-talk is eliminated when utilizing bus configuration option |
| Quick, easy setup and adjustment due to an intuitive operating menu |
| Flexible parameter adjustment due to high-resolution signal processing. Hysteresis and time delays can be adapted to suit the application, e.g., when detecting tiny or transparent objects |
| Easy-to-read display, even under difficult installation conditions |
| Features | |||
| Тип устройства: | Expansion unit | ||
| Dimensions (W x H x D): | 10.5 mm x 34.6 mm x 71.9 mm | ||
| Sensing range max.: | 0 m ... 20 m, through-beam system 1)2) | ||
| Диапазон измерений: | 0 ... 18 m, through-beam system, 0 mm ... 1,400 mm, proximity system 3)4)5)6) | ||
| Источник света: | LED 7) | ||
| Type of light: | Visible red light | ||
| Длина волны: | 650 nm | ||
| Регулировка чувствительности: | Teach-in button cable +/- increment button, manual |
||
| Adjustment of operating distance: | Cable, +/- increment button, manual, Teach-in button | ||
| Teach-in: | Menu-controlled | ||
| Time type: | Without time delay time delay off switch on delay ON and OFF delay one shot |
||
| Время задержки: | Programmable: 0 ... 9,999 ms | ||
| Индикатор: | Display | ||
| Sensor/detection principle: | Fiber-optic photoelectric sensor | ||
| Angle of dispersion: | Ca. 65 ° | ||
| Housing design (light emission): | Rectangular | ||
| Display: | LED status display / 2x 4-character digital dual displays, Set value (green indicator) and actual value (red indicator) are displayed simultaneously, display of parameters | ||
| Механика/электроника | |||
| Enclosure rating: | IP 50 1) | ||
| Supply voltage: | 12 V DC ... 24 V DC 2) | ||
| Пульсации: | ≤ 10 % 3) | ||
| Потребляемая мощность: | ≤ 50 mA 4) | ||
| Output type: | PNP, Light/dark-switching, manually selectable, open collector | ||
| Output current Imax.: | ≤ 100 mA | ||
| Response time: | ≤ 2 ms ≤ 8 ms ≤ 16 µs ≤ 70 µs ≤ 250 µs 5) |
||
| Частота переключений: | 31.2 kHz 7.1 kHz 2 kHz 250 Hz 62.5 Hz |
||
| Тип подключения: | Connector M8, 4-pin | ||
| Класс защиты: | III | ||
| Защита цепи: | A, B, C, D 6)7)8)9) | ||
| Special device: | 0 | ||
| Материал корпуса: | ABS/PC | ||
| Ambient operating temperature: | -25 °C ... 55 °C 10) | ||
| Температура хранения: | -40 °C ... 70 °C | ||
At a glance
| Selectable response time up to 16 µs |
| Sensing range up to 20 m, sensing distance up to 1400 mm |
| Bus-compatible with anti-interference |
| 2 x 4-digit display |
| Adjustable hysteresis |
| Rotatable display screen |
| High-resolution signal processing |
| Programmable time delays |
Your benefits
| Reliable, rapid process detection, even under the most difficult ambient conditions, such as dust, spray or mist |
| Easy commissioning and product changeover due to external teach-in |
| Cross-talk is eliminated when utilizing bus configuration option |
| Quick, easy setup and adjustment due to an intuitive operating menu |
| Flexible parameter adjustment due to high-resolution signal processing. Hysteresis and time delays can be adapted to suit the application, e.g., when detecting tiny or transparent objects |
| Easy-to-read display, even under difficult installation conditions |
| Features | |||
| Тип устройства: | Expansion unit | ||
| Dimensions (W x H x D): | 10.5 mm x 34.6 mm x 71.9 mm | ||
| Sensing range max.: | 0 m ... 20 m, through-beam system 1)2) | ||
| Диапазон измерений: | 0 mm ... 1,400 mm, proximity system 3)4) | ||
| Источник света: | LED 5) | ||
| Type of light: | Visible red light | ||
| Длина волны: | 650 nm | ||
| Регулировки: | Cable, +/- increment button, manual, Teach-in button, Teach-in button cable +/- increment button, manual |
||
| Teach-in: | Menu-controlled | ||
| Time type: | Without time delay time delay off switch on delay ON and OFF delay one shot |
||
| Время задержки: | Programmable: 0 ... 9,999 ms | ||
| Индикатор: | Display | ||
| Sensor/detection principle: | Fiber-optic photoelectric sensor | ||
| Angle of dispersion: | Ca. 65 ° | ||
| Housing design (light emission): | Rectangular | ||
| Display: | LED status display / 2x 4-character digital dual displays, Set value (green indicator) and actual value (red indicator) are displayed simultaneously, display of parameters | ||
| Механика/электроника | |||
| Enclosure rating: | IP 50 1) | ||
| Supply voltage: | 12 V DC ... 24 V DC 2) | ||
| Пульсации: | ≤ 10 % 3) | ||
| Потребляемая мощность: | ≤ 50 mA 4) | ||
| Output type: | PNP | ||
| Output current Imax.: | ≤ 100 mA | ||
| Response time: | ≤ 2 ms ≤ 8 ms ≤ 16 µs ≤ 70 µs ≤ 250 µs 5) |
||
| Частота переключений: | ± 31.2 kHz ± 7.1 kHz ± 2 kHz ± 250 Hz ± 62.5 Hz |
||
| Тип подключения: | Cable with connector M8, 4-pin, 0.2 m 6) | ||
| Класс защиты: | III | ||
| Защита цепи: | A, B, C, D 7)8)9)10) | ||
| Special device: | 1 | ||
| Материал корпуса: | ABS/PC, Plastic | ||
| Ambient operating temperature: | -25 °C ... 55 °C 11) | ||
| Температура хранения: | -25 °C ... 70 °C | ||
| Режим переключения: | Светлое/темное переключение | ||
| Output characteristic: | Open collector | ||
| Режим переключения селектора: | Manually selectable | ||
At a glance
| Selectable response time up to 16 µs |
| Sensing range up to 20 m, sensing distance up to 1400 mm |
| Bus-compatible with anti-interference |
| 2 x 4-digit display |
| Adjustable hysteresis |
| Rotatable display screen |
| High-resolution signal processing |
| Programmable time delays |
Your benefits
| Reliable, rapid process detection, even under the most difficult ambient conditions, such as dust, spray or mist |
| Easy commissioning and product changeover due to external teach-in |
| Cross-talk is eliminated when utilizing bus configuration option |
| Quick, easy setup and adjustment due to an intuitive operating menu |
| Flexible parameter adjustment due to high-resolution signal processing. Hysteresis and time delays can be adapted to suit the application, e.g., when detecting tiny or transparent objects |
| Easy-to-read display, even under difficult installation conditions |
| Features | |||
| Тип устройства: | Expansion unit | ||
| Dimensions (W x H x D): | 10.5 mm x 34.6 mm x 71.9 mm | ||
| Sensing range max.: | 0 m ... 20 m, through-beam system 1)2) | ||
| Диапазон измерений: | 0 mm ... 1,400 mm, proximity system 3)4) | ||
| Источник света: | LED 5) | ||
| Type of light: | Visible red light | ||
| Длина волны: | 650 nm | ||
| Регулировка чувствительности: | Teach-in button cable +/- increment button, manual |
||
| Adjustment of operating distance: | Cable, +/- increment button, manual, Teach-in button | ||
| Teach-in: | Menu-controlled | ||
| Time type: | Without time delay time delay off switch on delay ON and OFF delay one shot |
||
| Время задержки: | Programmable: 0 ... 9,999 ms | ||
| Индикатор: | Display | ||
| Sensor/detection principle: | Fiber-optic photoelectric sensor | ||
| Angle of dispersion: | Ca. 65 ° | ||
| Housing design (light emission): | Rectangular | ||
| Display: | LED status display / 2x 4-character digital dual displays, Set value (green indicator) and actual value (red indicator) are displayed simultaneously, display of parameters | ||
| Механика/электроника | |||
| Enclosure rating: | IP 50 1) | ||
| Supply voltage: | 12 V DC ... 24 V DC 2) | ||
| Пульсации: | ≤ 10 % 3) | ||
| Потребляемая мощность: | ≤ 50 mA 4) | ||
| Output type: | PNP, Light/dark-switching, manually selectable, open collector | ||
| Output current Imax.: | ≤ 100 mA | ||
| Response time: | ≤ 2 ms ≤ 8 ms ≤ 16 µs ≤ 70 µs ≤ 250 µs 5) |
||
| Частота переключений: | 31.2 kHz 7.1 kHz 2 kHz 250 Hz 62.5 Hz |
||
| Тип подключения: | Connector M8, 4-pin, 0.2 m 6) | ||
| Класс защиты: | III | ||
| Защита цепи: | A, B, C, D 7)8)9)10) | ||
| Special device: | 1 | ||
| Материал корпуса: | ABS/PC | ||
| Ambient operating temperature: | -25 °C ... 55 °C 11) | ||
| Температура хранения: | -25 °C ... 70 °C | ||
| Special features: | Automatic sender power adjustment | ||
At a glance
| Selectable response time up to 16 µs |
| Sensing range up to 20 m, sensing distance up to 1400 mm |
| Bus-compatible with anti-interference |
| 2 x 4-digit display |
| Adjustable hysteresis |
| Rotatable display screen |
| High-resolution signal processing |
| Programmable time delays |
Your benefits
| Reliable, rapid process detection, even under the most difficult ambient conditions, such as dust, spray or mist |
| Easy commissioning and product changeover due to external teach-in |
| Cross-talk is eliminated when utilizing bus configuration option |
| Quick, easy setup and adjustment due to an intuitive operating menu |
| Flexible parameter adjustment due to high-resolution signal processing. Hysteresis and time delays can be adapted to suit the application, e.g., when detecting tiny or transparent objects |
| Easy-to-read display, even under difficult installation conditions |
| Features | |||
| Тип устройства: | Expansion unit | ||
| Dimensions (W x H x D): | 10.5 mm x 34.6 mm x 71.9 mm | ||
| Sensing range max.: | 0 m ... 20 m, through-beam system 1)2) | ||
| Диапазон измерений: | 0 m ... 18 m, through-beam system, 0 mm ... 1,400 mm, proximity system 3)4)5)6) | ||
| Источник света: | LED 7) | ||
| Type of light: | Visible red light | ||
| Длина волны: | 650 nm | ||
| Регулировка чувствительности: | Teach-in button cable +/- increment button, manual |
||
| Adjustment of operating distance: | Cable, +/- increment button, manual, Teach-in button | ||
| Teach-in: | Menu-controlled | ||
| Time type: | Without time delay time delay off switch on delay ON and OFF delay one shot |
||
| Время задержки: | Programmable: 0 ... 9,999 ms | ||
| Индикатор: | Display | ||
| Sensor/detection principle: | Fiber-optic photoelectric sensor | ||
| Angle of dispersion: | Ca. 65 ° | ||
| Housing design (light emission): | Rectangular | ||
| Display: | LED status display / 2x 4-character digital dual displays, Set value (green indicator) and actual value (red indicator) are displayed simultaneously, display of parameters | ||
| Механика/электроника | |||
| Enclosure rating: | IP 50 1) | ||
| Supply voltage: | 12 V DC ... 24 V DC 2) | ||
| Пульсации: | ≤ 10 % 3) | ||
| Потребляемая мощность: | ≤ 50 mA 4) | ||
| Output type: | PNP | ||
| Output current Imax.: | ≤ 100 mA | ||
| Response time: | ≤ 2 ms ≤ 8 ms ≤ 16 µs ≤ 70 µs ≤ 250 µs 5) |
||
| Частота переключений: | 31.2 kHz 7.1 kHz 2 kHz 250 Hz 62.5 Hz |
||
| Тип подключения: | Connector M8, 4-pin | ||
| Класс защиты: | III | ||
| Защита цепи: | A, B, C, D 6)7)8)9) | ||
| Special device: | 0 | ||
| Материал корпуса: | ABS/PC, Plastic | ||
| Ambient operating temperature: | -25 °C ... 55 °C 10) | ||
| Температура хранения: | -40 °C ... 70 °C | ||
| Special features: | Anti-interference | ||
| Режим переключения: | Светлое/темное переключение | ||
| Output characteristic: | Open collector | ||
| Режим переключения селектора: | Manually selectable | ||
At a glance
| Selectable response time up to 16 µs |
| Sensing range up to 20 m, sensing distance up to 1400 mm |
| Bus-compatible with anti-interference |
| 2 x 4-digit display |
| Adjustable hysteresis |
| Rotatable display screen |
| High-resolution signal processing |
| Programmable time delays |
Your benefits
| Reliable, rapid process detection, even under the most difficult ambient conditions, such as dust, spray or mist |
| Easy commissioning and product changeover due to external teach-in |
| Cross-talk is eliminated when utilizing bus configuration option |
| Quick, easy setup and adjustment due to an intuitive operating menu |
| Flexible parameter adjustment due to high-resolution signal processing. Hysteresis and time delays can be adapted to suit the application, e.g., when detecting tiny or transparent objects |
| Easy-to-read display, even under difficult installation conditions |
| Features | |||
| Тип устройства: | Expansion unit | ||
| Dimensions (W x H x D): | 10.5 mm x 34.6 mm x 71.9 mm | ||
| Sensing range max.: | 0 m ... 20 m, through-beam system 1)2) | ||
| Диапазон измерений: | 0 m ... 18 m, through-beam system, 0 mm ... 1,400 mm, proximity system 3)4)5)6) | ||
| Источник света: | LED 7) | ||
| Type of light: | Visible red light | ||
| Длина волны: | 650 nm | ||
| Регулировка чувствительности: | Teach-in button cable +/- increment button, manual |
||
| Adjustment of operating distance: | Cable, +/- increment button, manual, Teach-in button | ||
| Teach-in: | Menu-controlled | ||
| Time type: | Without time delay time delay off switch on delay ON and OFF delay one shot |
||
| Время задержки: | Programmable: 0 ... 9,999 ms | ||
| Индикатор: | Display | ||
| Sensor/detection principle: | Fiber-optic photoelectric sensor | ||
| Angle of dispersion: | Ca. 65 ° | ||
| Housing design (light emission): | Rectangular | ||
| Display: | LED status display / 2x 4-character digital dual displays, Set value (green indicator) and actual value (red indicator) are displayed simultaneously, display of parameters | ||
| Механика/электроника | |||
| Enclosure rating: | IP 50 1) | ||
| Supply voltage: | 12 V DC ... 24 V DC 2) | ||
| Пульсации: | ≤ 10 % 3) | ||
| Потребляемая мощность: | ≤ 50 mA 4) | ||
| Output type: | 2 x PNP, Light/dark-switching, manually selectable, open collector | ||
| Output current Imax.: | ≤ 100 mA | ||
| Response time: | ≤ 2 ms ≤ 8 ms ≤ 16 µs ≤ 70 µs ≤ 250 µs 5) |
||
| Частота переключений: | 31.2 kHz 7.1 kHz 2 kHz 250 Hz 62.5 Hz |
||
| Тип подключения: | Connector M8, 4-pin | ||
| Класс защиты: | III | ||
| Защита цепи: | A, B, C, D 6)7)8)9) | ||
| Special device: | 0 | ||
| Материал корпуса: | ABS/PC | ||
| Ambient operating temperature: | -25 °C ... 55 °C 10) | ||
| Температура хранения: | -40 °C ... 70 °C | ||
At a glance
| Selectable response time up to 16 µs |
| Sensing range up to 20 m (Through-beam system); up to 1400 mm (proximity system) |
| Bus-compatible with anti-interference |
| 2 x 4-digit display |
| Adjustable hysteresis |
| Rotatable display screen |
| High-resolution signal processing |
| Programmable time delays |
Your benefits
| Reliable, rapid process detection, even under the most difficult ambient conditions, such as dust, spray or mist |
| Easy commissioning and product changeover due to external teach-in |
| Cross-talk is eliminated when utilizing bus configuration option |
| Quick, easy setup and adjustment due to an intuitive operating menu |
| Flexible parameter adjustment due to high-resolution signal processing. Hysteresis and time delays can be adapted to suit the application, e.g., when detecting tiny or transparent objects |
| Easy-to-read display, even under difficult installation conditions |
| Features | |||
| Тип устройства: | Base unit 1) | ||
| Dimensions (W x H x D): | 10.5 mm x 34.6 mm x 71.9 mm | ||
| Sensing range max.: | 0 m ... 20 m, through-beam system 2)3) | ||
| Диапазон измерений: | 0 ... 18 m, through-beam system, 0 mm ... 1,400 mm, proximity system 4)5)6)7) | ||
| Источник света: | LED 8) | ||
| Type of light: | Visible red light | ||
| Длина волны: | 650 nm | ||
| Регулировки: | Single teach-in button, Cable, Menu-controlled | ||
| Time type: | Without time delay time delay off switch on delay ON and OFF delay one shot |
||
| Время задержки: | Programmable, 0 ms, 9,999 ms | ||
| Индикатор: | Display | ||
| Sensor/detection principle: | Fiber-optic photoelectric sensor | ||
| Angle of dispersion: | Ca. 65 ° | ||
| Housing design (light emission): | Rectangular | ||
| Display: | LED status display / 2x 4-character digital dual displays, Set value (green indicator) and actual value (red indicator) are displayed simultaneously, display of parameters | ||
| Фокус: | See LL3 fiber-optic data | ||
| Механика/электроника | |||
| Enclosure rating: | IP 50 1) | ||
| Supply voltage: | 12 V DC ... 24 V DC 2) | ||
| Пульсации: | ≤ 10 % 3) | ||
| Потребляемая мощность: | ≤ 50 mA 4) | ||
| Output type: | NPN, open collector | ||
| Output current Imax.: | ≤ 100 mA | ||
| Response time: | ≤ 2 ms ≤ 8 ms ≤ 16 µs ≤ 70 µs ≤ 250 µs 5) |
||
| Частота переключений: | 31.2 kHz 7.1 kHz 2 kHz 250 Hz 62.5 Hz |
||
| Тип подключения: | Cable, 4-wire, 2 m 6) | ||
| Материал кабеля: | PVC | ||
| Сечение провода: | 0.2 mm² | ||
| Класс защиты: | III | ||
| Защита цепи: | A, B, C, D 7)8)9)10) | ||
| Special device: | 0 | ||
| Ambient operating temperature: | -25 °C ... +55 °C | ||
| Температура хранения: | -40 °C ... +70 °C | ||
| Вес: | 25 g | ||
| Режим переключения: | Светлое/темное переключение | ||
| Режим переключения селектора: | Manually selectable | ||
| UL File No.: | NRKH2.E300503 & NRKH8.E300503 | ||
| Материал корпуса: | ABS/PC, Plastic | ||
At a glance
| Selectable response time up to 16 µs |
| Sensing range up to 20 m, sensing distance up to 1400 mm |
| Bus-compatible with anti-interference |
| 2 x 4-digit display |
| Adjustable hysteresis |
| Rotatable display screen |
| High-resolution signal processing |
| Programmable time delays |
Your benefits
| Reliable, rapid process detection, even under the most difficult ambient conditions, such as dust, spray or mist |
| Easy commissioning and product changeover due to external teach-in |
| Cross-talk is eliminated when utilizing bus configuration option |
| Quick, easy setup and adjustment due to an intuitive operating menu |
| Flexible parameter adjustment due to high-resolution signal processing. Hysteresis and time delays can be adapted to suit the application, e.g., when detecting tiny or transparent objects |
| Easy-to-read display, even under difficult installation conditions |
| Features | |||
| Тип устройства: | Base unit 1) | ||
| Dimensions (W x H x D): | 10.5 mm x 34.6 mm x 71.9 mm | ||
| Sensing range max.: | 0 m ... 20 m, through-beam system 2)3) | ||
| Диапазон измерений: | 0 ... 18 m, through-beam system, 0 mm ... 1,400 mm, proximity system 4)5)6)7) | ||
| Источник света: | LED 8) | ||
| Type of light: | Visible red light | ||
| Длина волны: | 650 nm | ||
| Регулировка чувствительности: | Teach-in button cable +/- increment button, manual |
||
| Adjustment of operating distance: | Cable, +/- increment button, manual, Teach-in button | ||
| Teach-in: | Menu-controlled | ||
| Time type: | Without time delay time delay off switch on delay ON and OFF delay one shot |
||
| Время задержки: | Programmable: 0 ... 9,999 ms | ||
| Индикатор: | Display | ||
| Sensor/detection principle: | Fiber-optic photoelectric sensor | ||
| Angle of dispersion: | Ca. 65 ° | ||
| Housing design (light emission): | Rectangular | ||
| Display: | LED status display / 2x 4-character digital dual displays, Set value (green indicator) and actual value (red indicator) are displayed simultaneously, display of parameters | ||
| Механика/электроника | |||
| Enclosure rating: | IP 50 1) | ||
| Supply voltage: | 12 V DC ... 24 V DC 2) | ||
| Пульсации: | ≤ 10 % 3) | ||
| Потребляемая мощность: | ≤ 50 mA 4) | ||
| Output type: | NPN, Light/dark-switching, manually selectable, open collector | ||
| Output current Imax.: | ≤ 100 mA | ||
| Response time: | ≤ 2 ms ≤ 8 ms ≤ 16 µs ≤ 70 µs ≤ 250 µs 5) |
||
| Частота переключений: | 31.2 kHz 7.1 kHz 2 kHz 250 Hz 62.5 Hz |
||
| Тип подключения: | Connector M8, 4-pin | ||
| Класс защиты: | III | ||
| Защита цепи: | A, B, C, D 6)7)8)9) | ||
| Special device: | 0 | ||
| Материал корпуса: | ABS/PC | ||
| Ambient operating temperature: | -25 °C ... 55 °C | ||
| Температура хранения: | -40 °C ... 70 °C | ||
At a glance
| Selectable response time up to 16 µs |
| Sensing range up to 20 m, sensing distance up to 1400 mm |
| Bus-compatible with anti-interference |
| 2 x 4-digit display |
| Adjustable hysteresis |
| Rotatable display screen |
| High-resolution signal processing |
| Programmable time delays |
Your benefits
| Reliable, rapid process detection, even under the most difficult ambient conditions, such as dust, spray or mist |
| Easy commissioning and product changeover due to external teach-in |
| Cross-talk is eliminated when utilizing bus configuration option |
| Quick, easy setup and adjustment due to an intuitive operating menu |
| Flexible parameter adjustment due to high-resolution signal processing. Hysteresis and time delays can be adapted to suit the application, e.g., when detecting tiny or transparent objects |
| Easy-to-read display, even under difficult installation conditions |
| Features | |||
| Тип устройства: | Base unit 1) | ||
| Dimensions (W x H x D): | 10.5 mm x 34.6 mm x 71.9 mm | ||
| Sensing range max.: | 0 m ... 20 m, through-beam system 2)3) | ||
| Диапазон измерений: | 0 m ... 18 m, through-beam system, 0 mm ... 1,400 mm, proximity system 4)5)6)7) | ||
| Источник света: | LED 8) | ||
| Type of light: | Visible red light | ||
| Длина волны: | 650 nm | ||
| Регулировка чувствительности: | Teach-in button cable +/- increment button, manual |
||
| Adjustment of operating distance: | Cable, +/- increment button, manual, Teach-in button | ||
| Teach-in: | Menu-controlled | ||
| Time type: | Without time delay time delay off switch on delay ON and OFF delay one shot |
||
| Время задержки: | Programmable: 0 ... 9,999 ms | ||
| Индикатор: | Display | ||
| Sensor/detection principle: | Fiber-optic photoelectric sensor | ||
| Angle of dispersion: | Ca. 65 ° | ||
| Housing design (light emission): | Rectangular | ||
| Display: | LED status display / 2x 4-character digital dual displays, Set value (green indicator) and actual value (red indicator) are displayed simultaneously, display of parameters | ||
| Механика/электроника | |||
| Enclosure rating: | IP 50 1) | ||
| Supply voltage: | 12 V DC ... 24 V DC 2) | ||
| Пульсации: | ≤ 10 % 3) | ||
| Потребляемая мощность: | ≤ 50 mA 4) | ||
| Output type: | 2 x NPN, Light/dark-switching, manually selectable, open collector | ||
| Output current Imax.: | ≤ 100 mA | ||
| Response time: | ≤ 2 ms ≤ 8 ms ≤ 16 µs ≤ 70 µs ≤ 250 µs 5) |
||
| Частота переключений: | 31.2 kHz 7.1 kHz 2 kHz 250 Hz 62.5 Hz |
||
| Тип подключения: | Cable, 4-wire, 2 m 6) | ||
| Материал кабеля: | PVC | ||
| Сечение провода: | 0.2 mm² | ||
| Класс защиты: | III | ||
| Защита цепи: | A, B, C, D 7)8)9)10) | ||
| Special device: | 0 | ||
| Материал корпуса: | ABS/PC | ||
| Ambient operating temperature: | -25 °C ... 55 °C | ||
| Температура хранения: | -40 °C ... 70 °C | ||
At a glance
| Selectable response time up to 16 µs |
| Sensing range up to 20 m, sensing distance up to 1400 mm |
| Bus-compatible with anti-interference |
| 2 x 4-digit display |
| Adjustable hysteresis |
| Rotatable display screen |
| High-resolution signal processing |
| Programmable time delays |
Your benefits
| Reliable, rapid process detection, even under the most difficult ambient conditions, such as dust, spray or mist |
| Easy commissioning and product changeover due to external teach-in |
| Cross-talk is eliminated when utilizing bus configuration option |
| Quick, easy setup and adjustment due to an intuitive operating menu |
| Flexible parameter adjustment due to high-resolution signal processing. Hysteresis and time delays can be adapted to suit the application, e.g., when detecting tiny or transparent objects |
| Easy-to-read display, even under difficult installation conditions |
| Features | |||
| Тип устройства: | Base unit 1) | ||
| Dimensions (W x H x D): | 10.5 mm x 34.6 mm x 71.9 mm | ||
| Sensing range max.: | 0 m ... 20 m, through-beam system 2)3) | ||
| Диапазон измерений: | 0 ... 18 m, through-beam system, 0 mm ... 1,400 mm, proximity system 4)5)6)7) | ||
| Источник света: | LED 8) | ||
| Type of light: | Visible red light | ||
| Длина волны: | 650 nm | ||
| Регулировка чувствительности: | Teach-in button cable +/- increment button, manual |
||
| Adjustment of operating distance: | Cable, +/- increment button, manual, Teach-in button | ||
| Teach-in: | Menu-controlled | ||
| Time type: | Without time delay time delay off switch on delay ON and OFF delay one shot |
||
| Время задержки: | Programmable: 0 ... 9,999 ms | ||
| Индикатор: | Display | ||
| Sensor/detection principle: | Fiber-optic photoelectric sensor | ||
| Angle of dispersion: | Ca. 65 ° | ||
| Housing design (light emission): | Rectangular | ||
| Display: | LED status display / 2x 4-character digital dual displays, Set value (green indicator) and actual value (red indicator) are displayed simultaneously, display of parameters | ||
| Механика/электроника | |||
| Enclosure rating: | IP 50 1) | ||
| Supply voltage: | 12 V DC ... 24 V DC 2) | ||
| Пульсации: | ≤ 10 % 3) | ||
| Потребляемая мощность: | ≤ 50 mA 4) | ||
| Output type: | PNP, Light/dark-switching, manually selectable, open collector | ||
| Output current Imax.: | ≤ 100 mA | ||
| Response time: | ≤ 2 ms ≤ 8 ms ≤ 16 µs ≤ 70 µs ≤ 250 µs 5) |
||
| Частота переключений: | 31.2 kHz 7.1 kHz 2 kHz 250 Hz 62.5 Hz |
||
| Тип подключения: | Connector M8, 3-pin | ||
| Класс защиты: | III | ||
| Защита цепи: | A, B, C, D 6)7)8)9) | ||
| Special device: | 0 | ||
| Материал корпуса: | ABS/PC | ||
| Ambient operating temperature: | -25 °C ... 55 °C | ||
| Температура хранения: | -40 °C ... 70 °C | ||
At a glance
| Selectable response time up to 16 µs |
| Sensing range up to 20 m, sensing distance up to 1400 mm |
| Bus-compatible with anti-interference |
| 2 x 4-digit display |
| Adjustable hysteresis |
| Rotatable display screen |
| High-resolution signal processing |
| Programmable time delays |
Your benefits
| Reliable, rapid process detection, even under the most difficult ambient conditions, such as dust, spray or mist |
| Easy commissioning and product changeover due to external teach-in |
| Cross-talk is eliminated when utilizing bus configuration option |
| Quick, easy setup and adjustment due to an intuitive operating menu |
| Flexible parameter adjustment due to high-resolution signal processing. Hysteresis and time delays can be adapted to suit the application, e.g., when detecting tiny or transparent objects |
| Easy-to-read display, even under difficult installation conditions |
| Features | |||
| Тип устройства: | Base unit 1) | ||
| Dimensions (W x H x D): | 10.5 mm x 34.6 mm x 71.9 mm | ||
| Sensing range max.: | 0 m ... 20 m, through-beam system 2)3) | ||
| Диапазон измерений: | 0 mm ... 1,400 mm, proximity system 4)5) | ||
| Источник света: | LED 6) | ||
| Type of light: | Visible red light | ||
| Длина волны: | 650 nm | ||
| Регулировка чувствительности: | Teach |
||
| Adjustment of operating distance: | Teach | ||
| Teach-in: | Menu-controlled | ||
| Time type: | Without time delay time delay off switch on delay ON and OFF delay one shot |
||
| Время задержки: | Programmable: 0 ... 9,999 ms | ||
| Индикатор: | Display | ||
| Sensor/detection principle: | Fiber-optic photoelectric sensor | ||
| Angle of dispersion: | Ca. 65 ° | ||
| Housing design (light emission): | Rectangular | ||
| Display: | LED status display / 2x 4-character digital dual displays, Set value (green indicator) and actual value (red indicator) are displayed simultaneously, display of parameters | ||
| Механика/электроника | |||
| Enclosure rating: | IP 50 1) | ||
| Supply voltage: | 12 V DC ... 24 V DC 2) | ||
| Пульсации: | ≤ 10 % 3) | ||
| Потребляемая мощность: | ≤ 50 mA 4) | ||
| Output type: | PNP, Light/dark-switching, manually selectable, open collector | ||
| Output current Imax.: | ≤ 100 mA | ||
| Response time: | ≤ 2 ms ≤ 8 ms ≤ 16 µs ≤ 70 µs ≤ 250 µs 5) |
||
| Частота переключений: | 31.2 kHz 7.1 kHz 2 kHz 250 Hz 62.5 Hz |
||
| Тип подключения: | Cable with plug, M8, 3-pin, 0.2 m 6) | ||
| Класс защиты: | III | ||
| Защита цепи: | A, B, C, D 7)8)9)10) | ||
| Special device: | 1 | ||
| Материал корпуса: | ABS/PC | ||
| Ambient operating temperature: | -25 °C ... 55 °C | ||
| Температура хранения: | -25 °C ... 70 °C | ||
| Special features: | M8, 3-pin, 200 mm Pigtail | ||
At a glance
| Selectable response time up to 16 µs |
| Sensing range up to 20 m, sensing distance up to 1400 mm |
| Bus-compatible with anti-interference |
| 2 x 4-digit display |
| Adjustable hysteresis |
| Rotatable display screen |
| High-resolution signal processing |
| Programmable time delays |
Your benefits
| Reliable, rapid process detection, even under the most difficult ambient conditions, such as dust, spray or mist |
| Easy commissioning and product changeover due to external teach-in |
| Cross-talk is eliminated when utilizing bus configuration option |
| Quick, easy setup and adjustment due to an intuitive operating menu |
| Flexible parameter adjustment due to high-resolution signal processing. Hysteresis and time delays can be adapted to suit the application, e.g., when detecting tiny or transparent objects |
| Easy-to-read display, even under difficult installation conditions |
| Features | |||
| Тип устройства: | Base unit 1) | ||
| Dimensions (W x H x D): | 10.5 mm x 34.6 mm x 71.9 mm | ||
| Sensing range max.: | 0 m ... 20 m, through-beam system 2)3) | ||
| Диапазон измерений: | 0 ... 18 m, through-beam system, 0 mm ... 1,400 mm, proximity system 4)5)6)7) | ||
| Источник света: | LED 8) | ||
| Type of light: | Visible red light | ||
| Длина волны: | 650 nm | ||
| Регулировка чувствительности: | Teach-in button cable +/- increment button, manual |
||
| Adjustment of operating distance: | Cable, +/- increment button, manual, Teach-in button | ||
| Teach-in: | Menu-controlled | ||
| Time type: | Without time delay time delay off switch on delay ON and OFF delay one shot |
||
| Время задержки: | Programmable: 0 ... 9,999 ms | ||
| Индикатор: | Display | ||
| Sensor/detection principle: | Fiber-optic photoelectric sensor | ||
| Angle of dispersion: | Ca. 65 ° | ||
| Housing design (light emission): | Rectangular | ||
| Display: | LED status display / 2x 4-character digital dual displays, Set value (green indicator) and actual value (red indicator) are displayed simultaneously, display of parameters | ||
| Механика/электроника | |||
| Enclosure rating: | IP 50 1) | ||
| Supply voltage: | 12 V DC ... 24 V DC 2) | ||
| Пульсации: | ≤ 10 % 3) | ||
| Потребляемая мощность: | ≤ 50 mA 4) | ||
| Output type: | PNP, Light/dark-switching, manually selectable, open collector | ||
| Output current Imax.: | ≤ 100 mA | ||
| Response time: | ≤ 2 ms ≤ 8 ms ≤ 16 µs ≤ 70 µs ≤ 250 µs 5) |
||
| Частота переключений: | 31.2 kHz 7.1 kHz 2 kHz 250 Hz 62.5 Hz |
||
| Тип подключения: | Cable, 4-wire, 2 m 6) | ||
| Материал кабеля: | PVC | ||
| Сечение провода: | 0.2 mm² | ||
| Класс защиты: | III | ||
| Защита цепи: | A, B, C, D 7)8)9)10) | ||
| Special device: | 0 | ||
| Материал корпуса: | ABS/PC | ||
| Ambient operating temperature: | -25 °C ... 55 °C | ||
| Температура хранения: | -40 °C ... 70 °C | ||
At a glance
| Selectable response time up to 16 µs |
| Sensing range up to 20 m, sensing distance up to 1400 mm |
| Bus-compatible with anti-interference |
| 2 x 4-digit display |
| Adjustable hysteresis |
| Rotatable display screen |
| High-resolution signal processing |
| Programmable time delays |
Your benefits
| Reliable, rapid process detection, even under the most difficult ambient conditions, such as dust, spray or mist |
| Easy commissioning and product changeover due to external teach-in |
| Cross-talk is eliminated when utilizing bus configuration option |
| Quick, easy setup and adjustment due to an intuitive operating menu |
| Flexible parameter adjustment due to high-resolution signal processing. Hysteresis and time delays can be adapted to suit the application, e.g., when detecting tiny or transparent objects |
| Easy-to-read display, even under difficult installation conditions |
| Features | |||
| Тип устройства: | Base unit 1) | ||
| Dimensions (W x H x D): | 10.5 mm x 34.6 mm x 71.9 mm | ||
| Sensing range max.: | 0 m ... 20 m, through-beam system 2)3) | ||
| Диапазон измерений: | 0 mm ... 1,400 mm, proximity system 4)5) | ||
| Источник света: | LED 6) | ||
| Type of light: | Visible red light | ||
| Длина волны: | 650 nm | ||
| Регулировка чувствительности: | Teach-in button cable +/- increment button, manual |
||
| Adjustment of operating distance: | Cable, +/- increment button, manual, Teach-in button | ||
| Teach-in: | Menu-controlled | ||
| Time type: | Without time delay time delay off switch on delay ON and OFF delay one shot |
||
| Время задержки: | Programmable: 0 ... 9,999 ms | ||
| Индикатор: | Display | ||
| Sensor/detection principle: | Fiber-optic photoelectric sensor | ||
| Angle of dispersion: | Ca. 65 ° | ||
| Housing design (light emission): | Rectangular | ||
| Display: | LED status display / 2x 4-character digital dual displays, Set value (green indicator) and actual value (red indicator) are displayed simultaneously, display of parameters | ||
| Механика/электроника | |||
| Enclosure rating: | IP 50 1) | ||
| Supply voltage: | 12 V DC ... 24 V DC 2) | ||
| Пульсации: | ≤ 10 % 3) | ||
| Потребляемая мощность: | ≤ 50 mA 4) | ||
| Output type: | PNP, Light/dark-switching, manually selectable, open collector | ||
| Output current Imax.: | ≤ 100 mA | ||
| Response time: | ≤ 2 ms ≤ 8 ms ≤ 16 µs ≤ 70 µs ≤ 250 µs 5) |
||
| Частота переключений: | 31.2 kHz 7.1 kHz 2 kHz 250 Hz 62.5 Hz |
||
| Тип подключения: | Cable, 3-wire, 2 m 6) | ||
| Класс защиты: | III | ||
| Защита цепи: | A, B, C, D 7)8)9)10) | ||
| Special device: | 1 | ||
| Материал корпуса: | ABS/PC | ||
| Ambient operating temperature: | -25 °C ... 55 °C | ||
| Температура хранения: | -25 °C ... 70 °C | ||
| Special features: | Switching frequency with object: 90.9 Hz | ||
At a glance
| Selectable response time up to 16 µs |
| Sensing range up to 20 m, sensing distance up to 1400 mm |
| Bus-compatible with anti-interference |
| 2 x 4-digit display |
| Adjustable hysteresis |
| Rotatable display screen |
| High-resolution signal processing |
| Programmable time delays |
Your benefits
| Reliable, rapid process detection, even under the most difficult ambient conditions, such as dust, spray or mist |
| Easy commissioning and product changeover due to external teach-in |
| Cross-talk is eliminated when utilizing bus configuration option |
| Quick, easy setup and adjustment due to an intuitive operating menu |
| Flexible parameter adjustment due to high-resolution signal processing. Hysteresis and time delays can be adapted to suit the application, e.g., when detecting tiny or transparent objects |
| Easy-to-read display, even under difficult installation conditions |
| Features | |||
| Тип устройства: | Base unit 1) | ||
| Dimensions (W x H x D): | 10.5 mm x 34.6 mm x 71.9 mm | ||
| Sensing range max.: | 0 m ... 20 m, through-beam system 2)3) | ||
| Диапазон измерений: | 0 ... 18 m, through-beam system, 0 mm ... 1,400 mm, proximity system 4)5)6)7) | ||
| Источник света: | LED 8) | ||
| Type of light: | Visible red light | ||
| Длина волны: | 650 nm | ||
| Регулировка чувствительности: | Teach-in button cable +/- increment button, manual |
||
| Adjustment of operating distance: | Cable, +/- increment button, manual, Teach-in button | ||
| Teach-in: | Menu-controlled | ||
| Time type: | Without time delay time delay off switch on delay ON and OFF delay one shot |
||
| Время задержки: | Programmable: 0 ... 9,999 ms | ||
| Индикатор: | Display | ||
| Sensor/detection principle: | Fiber-optic photoelectric sensor | ||
| Angle of dispersion: | Ca. 65 ° | ||
| Housing design (light emission): | Rectangular | ||
| Display: | LED status display / 2x 4-character digital dual displays, Set value (green indicator) and actual value (red indicator) are displayed simultaneously, display of parameters | ||
| Механика/электроника | |||
| Enclosure rating: | IP 50 1) | ||
| Supply voltage: | 12 V DC ... 24 V DC 2) | ||
| Пульсации: | ≤ 10 % 3) | ||
| Потребляемая мощность: | ≤ 50 mA 4) | ||
| Output type: | PNP, Light/dark-switching, manually selectable, open collector | ||
| Output current Imax.: | ≤ 100 mA | ||
| Response time: | ≤ 2 ms ≤ 8 ms ≤ 16 µs ≤ 70 µs ≤ 250 µs 5) |
||
| Частота переключений: | 31.2 kHz 7.1 kHz 2 kHz 250 Hz 62.5 Hz |
||
| Тип подключения: | Connector M8, 4-pin | ||
| Класс защиты: | III | ||
| Защита цепи: | A, B, C, D 6)7)8)9) | ||
| Special device: | 0 | ||
| Материал корпуса: | ABS/PC | ||
| Ambient operating temperature: | -25 °C ... 55 °C | ||
| Температура хранения: | -40 °C ... 70 °C | ||
At a glance
| Selectable response time up to 16 µs |
| Sensing range up to 20 m, sensing distance up to 1400 mm |
| Bus-compatible with anti-interference |
| 2 x 4-digit display |
| Adjustable hysteresis |
| Rotatable display screen |
| High-resolution signal processing |
| Programmable time delays |
Your benefits
| Reliable, rapid process detection, even under the most difficult ambient conditions, such as dust, spray or mist |
| Easy commissioning and product changeover due to external teach-in |
| Cross-talk is eliminated when utilizing bus configuration option |
| Quick, easy setup and adjustment due to an intuitive operating menu |
| Flexible parameter adjustment due to high-resolution signal processing. Hysteresis and time delays can be adapted to suit the application, e.g., when detecting tiny or transparent objects |
| Easy-to-read display, even under difficult installation conditions |
| Features | |||
| Тип устройства: | Base unit 1) | ||
| Dimensions (W x H x D): | 10.5 mm x 34.6 mm x 71.9 mm | ||
| Sensing range max.: | 0 m ... 20 m, through-beam system 2)3) | ||
| Диапазон измерений: | 0 mm ... 1,400 mm, proximity system 4)5) | ||
| Источник света: | LED 6) | ||
| Type of light: | Visible red light | ||
| Длина волны: | 650 nm | ||
| Регулировка чувствительности: | Teach |
||
| Adjustment of operating distance: | Teach | ||
| Teach-in: | Menu-controlled | ||
| Time type: | Without time delay time delay off switch on delay ON and OFF delay one shot |
||
| Время задержки: | Programmable: 0 ... 9,999 ms | ||
| Индикатор: | Display | ||
| Sensor/detection principle: | Fiber-optic photoelectric sensor | ||
| Angle of dispersion: | Ca. 65 ° | ||
| Housing design (light emission): | Rectangular | ||
| Display: | LED status display / 2x 4-character digital dual displays, Set value (green indicator) and actual value (red indicator) are displayed simultaneously, display of parameters | ||
| Механика/электроника | |||
| Enclosure rating: | IP 50 1) | ||
| Supply voltage: | 12 V DC ... 24 V DC 2) | ||
| Пульсации: | ≤ 10 % 3) | ||
| Потребляемая мощность: | ≤ 50 mA 4) | ||
| Output type: | PNP, Light/dark-switching, manually selectable, complementary, open collector | ||
| Output current Imax.: | ≤ 100 mA | ||
| Response time: | ≤ 2 ms ≤ 8 ms ≤ 16 µs ≤ 70 µs ≤ 250 µs 5) |
||
| Частота переключений: | 31.2 kHz 7.1 kHz 2 kHz 250 Hz 62.5 Hz |
||
| Тип подключения: | Connector M8, 4-pin | ||
| Класс защиты: | III | ||
| Защита цепи: | A, B, C, D 6)7)8)9) | ||
| Special device: | 1 | ||
| Материал корпуса: | ABS/PC | ||
| Ambient operating temperature: | -25 °C ... 55 °C | ||
| Температура хранения: | -25 °C ... 70 °C | ||
At a glance
| Selectable response time up to 16 µs |
| Sensing range up to 20 m, sensing distance up to 1400 mm |
| Bus-compatible with anti-interference |
| 2 x 4-digit display |
| Adjustable hysteresis |
| Rotatable display screen |
| High-resolution signal processing |
| Programmable time delays |
Your benefits
| Reliable, rapid process detection, even under the most difficult ambient conditions, such as dust, spray or mist |
| Easy commissioning and product changeover due to external teach-in |
| Cross-talk is eliminated when utilizing bus configuration option |
| Quick, easy setup and adjustment due to an intuitive operating menu |
| Flexible parameter adjustment due to high-resolution signal processing. Hysteresis and time delays can be adapted to suit the application, e.g., when detecting tiny or transparent objects |
| Easy-to-read display, even under difficult installation conditions |
| Features | |||
| Тип устройства: | Base unit 1) | ||
| Dimensions (W x H x D): | 10.5 mm x 34.6 mm x 71.9 mm | ||
| Sensing range max.: | 0 m ... 20 m, through-beam system 2)3) | ||
| Диапазон измерений: | 0 mm ... 1,400 mm, proximity system 4)5) | ||
| Источник света: | LED 6) | ||
| Type of light: | Visible red light | ||
| Длина волны: | 650 nm | ||
| Регулировка чувствительности: | Teach |
||
| Adjustment of operating distance: | Teach | ||
| Teach-in: | Menu-controlled | ||
| Time type: | Without time delay time delay off switch on delay ON and OFF delay one shot |
||
| Время задержки: | Programmable: 0 ... 9,999 ms | ||
| Индикатор: | Display | ||
| Sensor/detection principle: | Fiber-optic photoelectric sensor | ||
| Angle of dispersion: | Ca. 65 ° | ||
| Housing design (light emission): | Rectangular | ||
| Display: | LED status display / 2x 4-character digital dual displays, Set value (green indicator) and actual value (red indicator) are displayed simultaneously, display of parameters | ||
| Механика/электроника | |||
| Enclosure rating: | IP 50 1) | ||
| Supply voltage: | 12 V DC ... 24 V DC 2) | ||
| Пульсации: | ≤ 10 % 3) | ||
| Потребляемая мощность: | ≤ 50 mA 4) | ||
| Output type: | PNP, Light/dark-switching, manually selectable, open collector | ||
| Output current Imax.: | ≤ 100 mA | ||
| Response time: | ≤ 2 ms ≤ 8 ms ≤ 16 µs ≤ 70 µs ≤ 250 µs 5) |
||
| Частота переключений: | 31.2 kHz 7.1 kHz 2 kHz 250 Hz 62.5 Hz |
||
| Тип подключения: | Connector M8, 4-pin, 0.2 m 6) | ||
| Класс защиты: | III | ||
| Защита цепи: | A, B, C, D 7)8)9)10) | ||
| Special device: | 1 | ||
| Материал корпуса: | ABS/PC | ||
| Ambient operating temperature: | -25 °C ... 55 °C | ||
| Температура хранения: | -25 °C ... 70 °C | ||
| Special features: | Automatic sender power adjustment | ||
At a glance
| Selectable response time up to 16 µs |
| Sensing range up to 20 m, sensing distance up to 1400 mm |
| Bus-compatible with anti-interference |
| 2 x 4-digit display |
| Adjustable hysteresis |
| Rotatable display screen |
| High-resolution signal processing |
| Programmable time delays |
Your benefits
| Reliable, rapid process detection, even under the most difficult ambient conditions, such as dust, spray or mist |
| Easy commissioning and product changeover due to external teach-in |
| Cross-talk is eliminated when utilizing bus configuration option |
| Quick, easy setup and adjustment due to an intuitive operating menu |
| Flexible parameter adjustment due to high-resolution signal processing. Hysteresis and time delays can be adapted to suit the application, e.g., when detecting tiny or transparent objects |
| Easy-to-read display, even under difficult installation conditions |
| Features | |||
| Тип устройства: | Base unit 1) | ||
| Dimensions (W x H x D): | 10.5 mm x 34.6 mm x 71.9 mm | ||
| Sensing range max.: | 0 m ... 20 m, through-beam system 2)3) | ||
| Диапазон измерений: | 0 m ... 18 m, through-beam system, 0 mm ... 1,400 mm, proximity system 4)5)6)7) | ||
| Источник света: | LED 8) | ||
| Type of light: | Visible red light | ||
| Длина волны: | 650 nm | ||
| Регулировка чувствительности: | Teach-in button cable +/- increment button, manual |
||
| Adjustment of operating distance: | Cable, +/- increment button, manual, Teach-in button | ||
| Teach-in: | Menu-controlled | ||
| Time type: | Without time delay time delay off switch on delay ON and OFF delay one shot |
||
| Время задержки: | Programmable: 0 ... 9,999 ms | ||
| Индикатор: | Display | ||
| Sensor/detection principle: | Fiber-optic photoelectric sensor | ||
| Angle of dispersion: | Ca. 65 ° | ||
| Housing design (light emission): | Rectangular | ||
| Display: | LED status display / 2x 4-character digital dual displays, Set value (green indicator) and actual value (red indicator) are displayed simultaneously, display of parameters | ||
| Механика/электроника | |||
| Enclosure rating: | IP 50 1) | ||
| Supply voltage: | 12 V DC ... 24 V DC 2) | ||
| Пульсации: | ≤ 10 % 3) | ||
| Потребляемая мощность: | ≤ 50 mA 4) | ||
| Output type: | PNP, Light/dark-switching, manually selectable, open collector | ||
| Output current Imax.: | ≤ 100 mA | ||
| Response time: | ≤ 2 ms ≤ 8 ms ≤ 16 µs ≤ 70 µs ≤ 250 µs 5) |
||
| Частота переключений: | 31.2 kHz 7.1 kHz 2 kHz 250 Hz 62.5 Hz |
||
| Тип подключения: | Connector M8, 4-pin | ||
| Класс защиты: | III | ||
| Защита цепи: | A, B, C, D 6)7)8)9) | ||
| Special device: | 0 | ||
| Материал корпуса: | ABS/PC | ||
| Ambient operating temperature: | -25 °C ... 55 °C | ||
| Температура хранения: | -40 °C ... 70 °C | ||
At a glance
| Selectable response time up to 16 µs |
| Sensing range up to 20 m, sensing distance up to 1400 mm |
| Bus-compatible with anti-interference |
| 2 x 4-digit display |
| Adjustable hysteresis |
| Rotatable display screen |
| High-resolution signal processing |
| Programmable time delays |
Your benefits
| Reliable, rapid process detection, even under the most difficult ambient conditions, such as dust, spray or mist |
| Easy commissioning and product changeover due to external teach-in |
| Cross-talk is eliminated when utilizing bus configuration option |
| Quick, easy setup and adjustment due to an intuitive operating menu |
| Flexible parameter adjustment due to high-resolution signal processing. Hysteresis and time delays can be adapted to suit the application, e.g., when detecting tiny or transparent objects |
| Easy-to-read display, even under difficult installation conditions |
| Features | |||
| Тип устройства: | Base unit 1) | ||
| Dimensions (W x H x D): | 10.5 mm x 34.6 mm x 71.9 mm | ||
| Sensing range max.: | 0 m ... 20 m, through-beam system 2)3) | ||
| Диапазон измерений: | 0 m ... 18 m, through-beam system, 0 mm ... 1,400 mm, proximity system 4)5)6)7) | ||
| Источник света: | LED 8) | ||
| Type of light: | Visible red light | ||
| Длина волны: | 650 nm | ||
| Регулировка чувствительности: | Teach-in button cable +/- increment button, manual |
||
| Adjustment of operating distance: | Cable, +/- increment button, manual, Teach-in button | ||
| Teach-in: | Menu-controlled | ||
| Time type: | Without time delay time delay off switch on delay ON and OFF delay one shot |
||
| Время задержки: | Programmable: 0 ... 9,999 ms | ||
| Индикатор: | Display | ||
| Sensor/detection principle: | Fiber-optic photoelectric sensor | ||
| Angle of dispersion: | Ca. 65 ° | ||
| Housing design (light emission): | Rectangular | ||
| Display: | LED status display / 2x 4-character digital dual displays, Set value (green indicator) and actual value (red indicator) are displayed simultaneously, display of parameters | ||
| Механика/электроника | |||
| Enclosure rating: | IP 50 1) | ||
| Supply voltage: | 12 V DC ... 24 V DC 2) | ||
| Пульсации: | ≤ 10 % 3) | ||
| Потребляемая мощность: | ≤ 50 mA 4) | ||
| Output type: | 2 x PNP, Light/dark-switching, manually selectable, open collector | ||
| Output current Imax.: | ≤ 100 mA | ||
| Response time: | ≤ 2 ms ≤ 8 ms ≤ 16 µs ≤ 70 µs ≤ 250 µs 5) |
||
| Частота переключений: | 31.2 kHz 7.1 kHz 2 kHz 250 Hz 62.5 Hz |
||
| Тип подключения: | Connector M8, 4-pin | ||
| Класс защиты: | III | ||
| Защита цепи: | A, B, C, D 6)7)8)9) | ||
| Special device: | 0 | ||
| Материал корпуса: | ABS/PC | ||
| Ambient operating temperature: | -25 °C ... 55 °C | ||
| Температура хранения: | -40 °C ... 70 °C | ||
At a glance
| Selectable response time up to 16 µs |
| Sensing range up to 20 m (Through-beam system); up to 1400 mm (proximity system) |
| Bus-compatible with anti-interference |
| 2 x 4-digit display |
| Adjustable hysteresis |
| Rotatable display screen |
| High-resolution signal processing |
| Programmable time delays |
Your benefits
| Reliable, rapid process detection, even under the most difficult ambient conditions, such as dust, spray or mist |
| Easy commissioning and product changeover due to external teach-in |
| Cross-talk is eliminated when utilizing bus configuration option |
| Quick, easy setup and adjustment due to an intuitive operating menu |
| Flexible parameter adjustment due to high-resolution signal processing. Hysteresis and time delays can be adapted to suit the application, e.g., when detecting tiny or transparent objects |
| Easy-to-read display, even under difficult installation conditions |
| Features | |||
| Тип устройства: | Base unit 1) | ||
| Dimensions (W x H x D): | 10.5 mm x 34.6 mm x 71.9 mm | ||
| Sensing range max.: | 0 m ... 20 m, through-beam system 2)3) | ||
| Диапазон измерений: | 0 m ... 18 m, through-beam system, 0 mm ... 1,400 mm, proximity system 4)5)6)7) | ||
| Источник света: | LED 8) | ||
| Type of light: | Visible red light | ||
| Длина волны: | 650 nm | ||
| Регулировки: | Cable, +/- increment button, manual, Teach-in button, Teach-in button cable +/- increment button, manual |
||
| Teach-in: | Menu-controlled | ||
| Time type: | Without time delay time delay off switch on delay ON and OFF delay one shot |
||
| Время задержки: | Programmable: 0 ... 9,999 ms | ||
| Индикатор: | Display | ||
| Sensor/detection principle: | Fiber-optic photoelectric sensor | ||
| Angle of dispersion: | Ca. 65 ° | ||
| Housing design (light emission): | Rectangular | ||
| Display: | LED status display / 2x 4-character digital dual displays, Set value (green indicator) and actual value (red indicator) are displayed simultaneously, display of parameters | ||
| Фокус: | See LL3 fiber-optic data | ||
| Механика/электроника | |||
| Enclosure rating: | IP 50 1) | ||
| Supply voltage: | 12 V DC ... 24 V DC 2) | ||
| Пульсации: | ≤ 10 % 3) | ||
| Потребляемая мощность: | ≤ 50 mA 4) | ||
| Output type: | 2 x PNP, open collector | ||
| Output current Imax.: | ≤ 100 mA | ||
| Response time: | ≤ 2 ms ≤ 8 ms ≤ 16 µs ≤ 70 µs ≤ 250 µs 5) |
||
| Частота переключений: | ± 31.2 kHz ± 7.1 kHz ± 2 kHz ± 250 Hz ± 62.5 Hz |
||
| Тип подключения: | Connector M8, 4-pin | ||
| Класс защиты: | III | ||
| Защита цепи: | A, B, C, D 6)7)8)9) | ||
| Special device: | 1 | ||
| Материал корпуса: | ABS/PC, Plastic | ||
| Ambient operating temperature: | -25 °C ... 55 °C | ||
| Температура хранения: | -40 °C ... 70 °C | ||
| Special features: | Anti-interference, Parameter (pre-setting) | ||
| Вес: | Ca. 20 g | ||
| Режим переключения: | Светлое/темное переключение | ||
| Режим переключения селектора: | Manually selectable | ||
At a glance
| Selectable response time up to 16 µs |
| Sensing range up to 20 m (Through-beam system); up to 1400 mm (proximity system) |
| Bus-compatible with anti-interference |
| 2 x 4-digit display |
| Adjustable hysteresis |
| Rotatable display screen |
| High-resolution signal processing |
| Programmable time delays |
Your benefits
| Reliable, rapid process detection, even under the most difficult ambient conditions, such as dust, spray or mist |
| Easy commissioning and product changeover due to external teach-in |
| Cross-talk is eliminated when utilizing bus configuration option |
| Quick, easy setup and adjustment due to an intuitive operating menu |
| Flexible parameter adjustment due to high-resolution signal processing. Hysteresis and time delays can be adapted to suit the application, e.g., when detecting tiny or transparent objects |
| Easy-to-read display, even under difficult installation conditions |
| Features | |||
| Тип устройства: | Stand-alone | ||
| Dimensions (W x H x D): | 10.5 mm x 34.6 mm x 71.9 mm | ||
| Sensing range max.: | 0 m ... 20 m, through-beam system 1)2) | ||
| Диапазон измерений: | 0 ... 18 m, through-beam system, 0 mm ... 1,400 mm, proximity system 3)4)5)6) | ||
| Источник света: | LED 7) | ||
| Type of light: | Visible red light | ||
| Длина волны: | 650 nm | ||
| Регулировки: | Single teach-in button, Cable, Menu-controlled | ||
| Time type: | Without time delay time delay off switch on delay ON and OFF delay one shot |
||
| Время задержки: | Programmable, 0 ms, 9,999 ms | ||
| Индикатор: | Display | ||
| Sensor/detection principle: | Fiber-optic photoelectric sensor | ||
| Angle of dispersion: | Ca. 65 ° | ||
| Housing design (light emission): | Rectangular | ||
| Display: | LED status display / 2x 4-character digital dual displays, Set value (green indicator) and actual value (red indicator) are displayed simultaneously, display of parameters | ||
| Фокус: | See LL3 fiber-optic data | ||
| Механика/электроника | |||
| Enclosure rating: | IP 50 1) | ||
| Supply voltage: | 12 V DC ... 24 V DC 2) | ||
| Пульсации: | ≤ 10 % 3) | ||
| Потребляемая мощность: | ≤ 50 mA 4) | ||
| Output type: | NPN, open collector | ||
| Output current Imax.: | ≤ 100 mA | ||
| Response time: | ≤ 2 ms ≤ 8 ms ≤ 16 µs ≤ 70 µs ≤ 250 µs 5) |
||
| Частота переключений: | 31.2 kHz 7.1 kHz 2 kHz 250 Hz 62.5 Hz |
||
| Тип подключения: | Cable, 4-wire, 2 m 6) | ||
| Материал кабеля: | PVC | ||
| Сечение провода: | 0.2 mm² | ||
| Класс защиты: | III | ||
| Защита цепи: | A, B, C, D 7)8)9)10) | ||
| Special device: | 0 | ||
| Ambient operating temperature: | -25 °C ... +55 °C | ||
| Температура хранения: | -40 °C ... +70 °C | ||
| Вес: | 25 g | ||
| Режим переключения: | Светлое/темное переключение | ||
| Режим переключения селектора: | Manually selectable | ||
| UL File No.: | NRKH2.E300503 & NRKH8.E300503 | ||
| Материал корпуса: | ABS/PC, Plastic | ||
At a glance
| Selectable response time up to 16 µs |
| Sensing range up to 20 m, sensing distance up to 1400 mm |
| Bus-compatible with anti-interference |
| 2 x 4-digit display |
| Adjustable hysteresis |
| Rotatable display screen |
| High-resolution signal processing |
| Programmable time delays |
Your benefits
| Reliable, rapid process detection, even under the most difficult ambient conditions, such as dust, spray or mist |
| Easy commissioning and product changeover due to external teach-in |
| Cross-talk is eliminated when utilizing bus configuration option |
| Quick, easy setup and adjustment due to an intuitive operating menu |
| Flexible parameter adjustment due to high-resolution signal processing. Hysteresis and time delays can be adapted to suit the application, e.g., when detecting tiny or transparent objects |
| Easy-to-read display, even under difficult installation conditions |
| Features | |||
| Тип устройства: | Stand-alone | ||
| Dimensions (W x H x D): | 10.5 mm x 34.6 mm x 71.9 mm | ||
| Sensing range max.: | 0 m ... 20 m, through-beam system 1)2) | ||
| Диапазон измерений: | 0 mm ... 1,400 mm, proximity system 3)4) | ||
| Источник света: | LED 5) | ||
| Type of light: | Visible red light | ||
| Длина волны: | 650 nm | ||
| Регулировка чувствительности: | Teach |
||
| Adjustment of operating distance: | Teach | ||
| Teach-in: | Menu-controlled | ||
| Time type: | Without time delay time delay off switch on delay ON and OFF delay one shot |
||
| Время задержки: | Programmable: 0 ... 9,999 ms | ||
| Индикатор: | Display | ||
| Sensor/detection principle: | Fiber-optic photoelectric sensor | ||
| Angle of dispersion: | Ca. 65 ° | ||
| Housing design (light emission): | Rectangular | ||
| Display: | LED status display / 2x 4-character digital dual displays, Set value (green indicator) and actual value (red indicator) are displayed simultaneously, display of parameters | ||
| Механика/электроника | |||
| Enclosure rating: | IP 50 1) | ||
| Supply voltage: | 12 V DC ... 24 V DC 2) | ||
| Пульсации: | ≤ 10 % 3) | ||
| Потребляемая мощность: | ≤ 50 mA 4) | ||
| Output type: | NPN, Light/dark-switching, manually selectable, open collector | ||
| Output current Imax.: | ≤ 100 mA | ||
| Response time: | ≤ 2 ms ≤ 8 ms ≤ 16 µs ≤ 70 µs ≤ 250 µs 5) |
||
| Частота переключений: | 31.2 kHz 7.1 kHz 2 kHz 250 Hz 62.5 Hz |
||
| Тип подключения: | Cable with plug, M8, 3-pin, 0.3 m 6) | ||
| Материал кабеля: | PVC | ||
| Класс защиты: | III | ||
| Защита цепи: | A, B, C, D 7)8)9)10) | ||
| Special device: | 1 | ||
| Материал корпуса: | ABS/PC | ||
| Ambient operating temperature: | -25 °C ... 55 °C | ||
| Температура хранения: | -25 °C ... 70 °C | ||
| Special features: | Molex Picoblade wire-to-board connector | ||
At a glance
| Selectable response time up to 16 µs |
| Sensing range up to 20 m, sensing distance up to 1400 mm |
| Bus-compatible with anti-interference |
| 2 x 4-digit display |
| Adjustable hysteresis |
| Rotatable display screen |
| High-resolution signal processing |
| Programmable time delays |
Your benefits
| Reliable, rapid process detection, even under the most difficult ambient conditions, such as dust, spray or mist |
| Easy commissioning and product changeover due to external teach-in |
| Cross-talk is eliminated when utilizing bus configuration option |
| Quick, easy setup and adjustment due to an intuitive operating menu |
| Flexible parameter adjustment due to high-resolution signal processing. Hysteresis and time delays can be adapted to suit the application, e.g., when detecting tiny or transparent objects |
| Easy-to-read display, even under difficult installation conditions |
| Features | |||
| Тип устройства: | Stand-alone | ||
| Dimensions (W x H x D): | 10.5 mm x 34.6 mm x 71.9 mm | ||
| Sensing range max.: | 0 m ... 20 m, through-beam system 1)2) | ||
| Диапазон измерений: | 0 ... 18 m, through-beam system, 0 mm ... 1,400 mm, proximity system 3)4)5)6) | ||
| Источник света: | LED 7) | ||
| Type of light: | Visible red light | ||
| Длина волны: | 650 nm | ||
| Регулировка чувствительности: | Teach-in button cable +/- increment button, manual |
||
| Adjustment of operating distance: | Cable, +/- increment button, manual, Teach-in button | ||
| Teach-in: | Menu-controlled | ||
| Time type: | Without time delay time delay off switch on delay ON and OFF delay one shot |
||
| Время задержки: | Programmable: 0 ... 9,999 ms | ||
| Индикатор: | Display | ||
| Sensor/detection principle: | Fiber-optic photoelectric sensor | ||
| Angle of dispersion: | Ca. 65 ° | ||
| Housing design (light emission): | Rectangular | ||
| Display: | LED status display / 2x 4-character digital dual displays, Set value (green indicator) and actual value (red indicator) are displayed simultaneously, display of parameters | ||
| Механика/электроника | |||
| Enclosure rating: | IP 50 1) | ||
| Supply voltage: | 12 V DC ... 24 V DC 2) | ||
| Пульсации: | ≤ 10 % 3) | ||
| Потребляемая мощность: | ≤ 50 mA 4) | ||
| Output type: | NPN, Light/dark-switching, manually selectable, open collector | ||
| Output current Imax.: | ≤ 100 mA | ||
| Response time: | ≤ 2 ms ≤ 8 ms ≤ 16 µs ≤ 70 µs ≤ 250 µs 5) |
||
| Частота переключений: | 31.2 kHz 7.1 kHz 2 kHz 250 Hz 62.5 Hz |
||
| Тип подключения: | Connector M8, 4-pin | ||
| Класс защиты: | III | ||
| Защита цепи: | A, B, C, D 6)7)8)9) | ||
| Special device: | 0 | ||
| Материал корпуса: | ABS/PC | ||
| Ambient operating temperature: | -25 °C ... 55 °C | ||
| Температура хранения: | -40 °C ... 70 °C | ||
At a glance
| Selectable response time up to 16 µs |
| Sensing range up to 20 m, sensing distance up to 1400 mm |
| Bus-compatible with anti-interference |
| 2 x 4-digit display |
| Adjustable hysteresis |
| Rotatable display screen |
| High-resolution signal processing |
| Programmable time delays |
Your benefits
| Reliable, rapid process detection, even under the most difficult ambient conditions, such as dust, spray or mist |
| Easy commissioning and product changeover due to external teach-in |
| Cross-talk is eliminated when utilizing bus configuration option |
| Quick, easy setup and adjustment due to an intuitive operating menu |
| Flexible parameter adjustment due to high-resolution signal processing. Hysteresis and time delays can be adapted to suit the application, e.g., when detecting tiny or transparent objects |
| Easy-to-read display, even under difficult installation conditions |
| Features | |||
| Тип устройства: | Stand-alone | ||
| Dimensions (W x H x D): | 10.5 mm x 34.6 mm x 71.9 mm | ||
| Sensing range max.: | 0 mm ... 1,000 mm, through-beam system 1)2) | ||
| Диапазон измерений: | 0 m ... 850 mm, through-beam system, 0 mm ... 400 mm, proximity system 3)4)5)6) | ||
| Источник света: | LED 7) | ||
| Type of light: | Infrared light | ||
| Длина волны: | 1,450 nm | ||
| Регулировка чувствительности: | Teach-in button cable +/- increment button, manual |
||
| Adjustment of operating distance: | Cable, +/- increment button, manual, Teach-in button | ||
| Teach-in: | Menu-controlled | ||
| Time type: | Without time delay time delay off switch on delay ON and OFF delay one shot |
||
| Время задержки: | Programmable: 0 ... 9,999 ms | ||
| Индикатор: | Display | ||
| Sensor/detection principle: | Fiber-optic photoelectric sensor | ||
| Angle of dispersion: | Ca. 65 ° | ||
| Housing design (light emission): | Rectangular | ||
| Display: | LED status display / 2x 4-character digital dual displays, Set value (green indicator) and actual value (red indicator) are displayed simultaneously, display of parameters | ||
| Механика/электроника | |||
| Enclosure rating: | IP 50 1) | ||
| Supply voltage: | 12 V DC ... 24 V DC 2) | ||
| Пульсации: | ≤ 10 % 3) | ||
| Потребляемая мощность: | ≤ 50 mA 4) | ||
| Output type: | NPN, Light/dark-switching, manually selectable, open collector | ||
| Output current Imax.: | ≤ 100 mA | ||
| Response time: | ≤ 2 ms ≤ 8 ms ≤ 16 µs ≤ 70 µs ≤ 250 µs 5) |
||
| Частота переключений: | 31.2 kHz 7.1 kHz 2 kHz 250 Hz 62.5 Hz |
||
| Тип подключения: | Connector M8, 4-pin | ||
| Класс защиты: | III | ||
| Защита цепи: | A, B, C, D 6)7)8)9) | ||
| Special device: | 0 | ||
| Материал корпуса: | ABS/PC | ||
| Ambient operating temperature: | -25 °C ... 55 °C | ||
| Температура хранения: | -40 °C ... 70 °C | ||
At a glance
| Selectable response time up to 16 µs |
| Sensing range up to 20 m, sensing distance up to 1400 mm |
| Bus-compatible with anti-interference |
| 2 x 4-digit display |
| Adjustable hysteresis |
| Rotatable display screen |
| High-resolution signal processing |
| Programmable time delays |
Your benefits
| Reliable, rapid process detection, even under the most difficult ambient conditions, such as dust, spray or mist |
| Easy commissioning and product changeover due to external teach-in |
| Cross-talk is eliminated when utilizing bus configuration option |
| Quick, easy setup and adjustment due to an intuitive operating menu |
| Flexible parameter adjustment due to high-resolution signal processing. Hysteresis and time delays can be adapted to suit the application, e.g., when detecting tiny or transparent objects |
| Easy-to-read display, even under difficult installation conditions |
| Features | |||
| Тип устройства: | Stand-alone | ||
| Dimensions (W x H x D): | 10.5 mm x 34.6 mm x 71.9 mm | ||
| Sensing range max.: | 0 mm ... 1,000 mm, through-beam system 1)2) | ||
| Диапазон измерений: | 0 m ... 850 mm, through-beam system, 0 mm ... 400 mm, proximity system 3)4)5)6) | ||
| Источник света: | LED 7) | ||
| Type of light: | Infrared light | ||
| Длина волны: | 1,450 nm | ||
| Регулировка чувствительности: | Teach-in button cable +/- increment button, manual |
||
| Adjustment of operating distance: | Cable, +/- increment button, manual, Teach-in button | ||
| Teach-in: | Menu-controlled | ||
| Time type: | Without time delay time delay off switch on delay ON and OFF delay one shot |
||
| Время задержки: | Programmable: 0 ... 9,999 ms | ||
| Индикатор: | Display | ||
| Sensor/detection principle: | Fiber-optic photoelectric sensor | ||
| Angle of dispersion: | Ca. 65 ° | ||
| Housing design (light emission): | Rectangular | ||
| Display: | LED status display / 2x 4-character digital dual displays, Set value (green indicator) and actual value (red indicator) are displayed simultaneously, display of parameters | ||
| Механика/электроника | |||
| Enclosure rating: | IP 50 1) | ||
| Supply voltage: | 12 V DC ... 24 V DC 2) | ||
| Пульсации: | ≤ 10 % 3) | ||
| Потребляемая мощность: | ≤ 50 mA 4) | ||
| Output type: | NPN, Light/dark-switching, manually selectable, open collector | ||
| Output current Imax.: | ≤ 100 mA | ||
| Response time: | ≤ 2 ms ≤ 8 ms ≤ 16 µs ≤ 70 µs ≤ 250 µs 5) |
||
| Частота переключений: | 31.2 kHz 7.1 kHz 2 kHz 250 Hz 62.5 Hz |
||
| Тип подключения: | Connector M8, 4-pin | ||
| Класс защиты: | III | ||
| Защита цепи: | A, B, C, D 6)7)8)9) | ||
| Special device: | 1 | ||
| Материал корпуса: | ABS/PC | ||
| Ambient operating temperature: | -25 °C ... 55 °C | ||
| Температура хранения: | -40 °C ... 70 °C | ||
At a glance
| Selectable response time up to 16 µs |
| Sensing range up to 20 m, sensing distance up to 1400 mm |
| Bus-compatible with anti-interference |
| 2 x 4-digit display |
| Adjustable hysteresis |
| Rotatable display screen |
| High-resolution signal processing |
| Programmable time delays |
Your benefits
| Reliable, rapid process detection, even under the most difficult ambient conditions, such as dust, spray or mist |
| Easy commissioning and product changeover due to external teach-in |
| Cross-talk is eliminated when utilizing bus configuration option |
| Quick, easy setup and adjustment due to an intuitive operating menu |
| Flexible parameter adjustment due to high-resolution signal processing. Hysteresis and time delays can be adapted to suit the application, e.g., when detecting tiny or transparent objects |
| Easy-to-read display, even under difficult installation conditions |
| Features | |||
| Тип устройства: | Stand-alone | ||
| Dimensions (W x H x D): | 10.5 mm x 34.6 mm x 71.9 mm | ||
| Sensing range max.: | 0 m ... 20 m, through-beam system 1)2) | ||
| Диапазон измерений: | 0 ... 18 m, through-beam system, 0 mm ... 1,400 mm, proximity system 3)4)5)6) | ||
| Источник света: | LED 7) | ||
| Type of light: | Visible red light | ||
| Длина волны: | 650 nm | ||
| Регулировка чувствительности: | Teach-in button cable +/- increment button, manual |
||
| Adjustment of operating distance: | Cable, +/- increment button, manual, Teach-in button | ||
| Teach-in: | Menu-controlled | ||
| Time type: | Without time delay time delay off switch on delay ON and OFF delay one shot |
||
| Время задержки: | Programmable: 0 ... 9,999 ms | ||
| Индикатор: | Display | ||
| Sensor/detection principle: | Fiber-optic photoelectric sensor | ||
| Angle of dispersion: | Ca. 65 ° | ||
| Housing design (light emission): | Rectangular | ||
| Display: | LED status display / 2x 4-character digital dual displays, Set value (green indicator) and actual value (red indicator) are displayed simultaneously, display of parameters | ||
| Механика/электроника | |||
| Enclosure rating: | IP 50 1) | ||
| Supply voltage: | 12 V DC ... 24 V DC 2) | ||
| Пульсации: | ≤ 10 % 3) | ||
| Потребляемая мощность: | ≤ 50 mA 4) | ||
| Output type: | PNP, Light/dark-switching, manually selectable, open collector | ||
| Output current Imax.: | ≤ 100 mA | ||
| Response time: | ≤ 2 ms ≤ 8 ms ≤ 16 µs ≤ 70 µs ≤ 250 µs 5) |
||
| Частота переключений: | 31.2 kHz 7.1 kHz 2 kHz 250 Hz 62.5 Hz |
||
| Тип подключения: | Cable, 4-wire, 2 m 6) | ||
| Материал кабеля: | PVC | ||
| Сечение провода: | 0.2 mm² | ||
| Класс защиты: | III | ||
| Защита цепи: | A, B, C, D 7)8)9)10) | ||
| Special device: | 0 | ||
| Материал корпуса: | ABS/PC | ||
| Ambient operating temperature: | -25 °C ... 55 °C | ||
| Температура хранения: | -40 °C ... 70 °C | ||
At a glance
| Selectable response time up to 16 µs |
| Sensing range up to 20 m, sensing distance up to 1400 mm |
| Bus-compatible with anti-interference |
| 2 x 4-digit display |
| Adjustable hysteresis |
| Rotatable display screen |
| High-resolution signal processing |
| Programmable time delays |
Your benefits
| Reliable, rapid process detection, even under the most difficult ambient conditions, such as dust, spray or mist |
| Easy commissioning and product changeover due to external teach-in |
| Cross-talk is eliminated when utilizing bus configuration option |
| Quick, easy setup and adjustment due to an intuitive operating menu |
| Flexible parameter adjustment due to high-resolution signal processing. Hysteresis and time delays can be adapted to suit the application, e.g., when detecting tiny or transparent objects |
| Easy-to-read display, even under difficult installation conditions |
| Features | |||
| Тип устройства: | Stand-alone | ||
| Dimensions (W x H x D): | 10.5 mm x 34.6 mm x 71.9 mm | ||
| Sensing range max.: | 0 m ... 20 m, through-beam system 1)2) | ||
| Диапазон измерений: | 0 m ... 18 m, through-beam system, 0 mm ... 1,400 mm, proximity system 3)4)5)6) | ||
| Источник света: | LED 7) | ||
| Type of light: | Visible red light | ||
| Длина волны: | 650 nm | ||
| Регулировка чувствительности: | Teach-in button cable +/- increment button, manual |
||
| Adjustment of operating distance: | Cable, +/- increment button, manual, Teach-in button | ||
| Teach-in: | Menu-controlled | ||
| Time type: | Without time delay time delay off switch on delay ON and OFF delay one shot |
||
| Время задержки: | Programmable: 0 ... 9,999 ms | ||
| Индикатор: | Display | ||
| Sensor/detection principle: | Fiber-optic photoelectric sensor | ||
| Angle of dispersion: | Ca. 65 ° | ||
| Housing design (light emission): | Rectangular | ||
| Display: | LED status display / 2x 4-character digital dual displays, Set value (green indicator) and actual value (red indicator) are displayed simultaneously, display of parameters | ||
| Механика/электроника | |||
| Enclosure rating: | IP 50 1) | ||
| Supply voltage: | 12 V DC ... 24 V DC 2) | ||
| Пульсации: | ≤ 10 % 3) | ||
| Потребляемая мощность: | ≤ 50 mA 4) | ||
| Output type: | PNP, Light/dark-switching, manually selectable, open collector | ||
| Output current Imax.: | ≤ 100 mA | ||
| Response time: | ≤ 2 ms ≤ 8 ms ≤ 16 µs ≤ 70 µs ≤ 250 µs 5) |
||
| Частота переключений: | 31.2 kHz 7.1 kHz 2 kHz 250 Hz 62.5 Hz |
||
| Тип подключения: | M12, 300 mm 6) | ||
| Материал кабеля: | PVC | ||
| Сечение провода: | 0.2 mm² | ||
| Класс защиты: | III | ||
| Защита цепи: | A, B, C, D 7)8)9)10) | ||
| Special device: | 0 | ||
| Материал корпуса: | ABS/PC | ||
| Ambient operating temperature: | -25 °C ... 55 °C | ||
| Температура хранения: | -40 °C ... 70 °C | ||
At a glance
| Selectable response time up to 16 µs |
| Sensing range up to 20 m, sensing distance up to 1400 mm |
| Bus-compatible with anti-interference |
| 2 x 4-digit display |
| Adjustable hysteresis |
| Rotatable display screen |
| High-resolution signal processing |
| Programmable time delays |
Your benefits
| Reliable, rapid process detection, even under the most difficult ambient conditions, such as dust, spray or mist |
| Easy commissioning and product changeover due to external teach-in |
| Cross-talk is eliminated when utilizing bus configuration option |
| Quick, easy setup and adjustment due to an intuitive operating menu |
| Flexible parameter adjustment due to high-resolution signal processing. Hysteresis and time delays can be adapted to suit the application, e.g., when detecting tiny or transparent objects |
| Easy-to-read display, even under difficult installation conditions |
| Features | |||
| Тип устройства: | Stand-alone | ||
| Dimensions (W x H x D): | 10.5 mm x 34.6 mm x 71.9 mm | ||
| Sensing range max.: | 0 m ... 20 m, through-beam system 1)2) | ||
| Диапазон измерений: | 0 ... 18 m, through-beam system, 0 mm ... 1,400 mm, proximity system 3)4)5)6) | ||
| Источник света: | LED 7) | ||
| Type of light: | Visible red light | ||
| Длина волны: | 650 nm | ||
| Регулировка чувствительности: | Teach-in button cable +/- increment button, manual |
||
| Adjustment of operating distance: | Cable, +/- increment button, manual, Teach-in button | ||
| Teach-in: | Menu-controlled | ||
| Time type: | Without time delay time delay off switch on delay ON and OFF delay one shot |
||
| Время задержки: | Programmable: 0 ... 9,999 ms | ||
| Индикатор: | Display | ||
| Sensor/detection principle: | Fiber-optic photoelectric sensor | ||
| Angle of dispersion: | Ca. 65 ° | ||
| Housing design (light emission): | Rectangular | ||
| Display: | LED status display / 2x 4-character digital dual displays, Set value (green indicator) and actual value (red indicator) are displayed simultaneously, display of parameters | ||
| Механика/электроника | |||
| Enclosure rating: | IP 50 1) | ||
| Supply voltage: | 12 V DC ... 24 V DC 2) | ||
| Пульсации: | ≤ 10 % 3) | ||
| Потребляемая мощность: | ≤ 50 mA 4) | ||
| Output type: | PNP, Light/dark-switching, manually selectable, open collector | ||
| Output current Imax.: | ≤ 100 mA | ||
| Response time: | ≤ 2 ms ≤ 8 ms ≤ 16 µs ≤ 70 µs ≤ 250 µs 5) |
||
| Частота переключений: | 31.2 kHz 7.1 kHz 2 kHz 250 Hz 62.5 Hz |
||
| Тип подключения: | Connector M8, 4-pin | ||
| Класс защиты: | III | ||
| Защита цепи: | A, B, C, D 6)7)8)9) | ||
| Special device: | 0 | ||
| Материал корпуса: | ABS/PC | ||
| Ambient operating temperature: | -25 °C ... 55 °C | ||
| Температура хранения: | -40 °C ... 70 °C | ||
At a glance
| Selectable response time up to 16 µs |
| Sensing range up to 20 m, sensing distance up to 1400 mm |
| Bus-compatible with anti-interference |
| 2 x 4-digit display |
| Adjustable hysteresis |
| Rotatable display screen |
| High-resolution signal processing |
| Programmable time delays |
Your benefits
| Reliable, rapid process detection, even under the most difficult ambient conditions, such as dust, spray or mist |
| Easy commissioning and product changeover due to external teach-in |
| Cross-talk is eliminated when utilizing bus configuration option |
| Quick, easy setup and adjustment due to an intuitive operating menu |
| Flexible parameter adjustment due to high-resolution signal processing. Hysteresis and time delays can be adapted to suit the application, e.g., when detecting tiny or transparent objects |
| Easy-to-read display, even under difficult installation conditions |
| Features | |||
| Тип устройства: | Stand-alone | ||
| Dimensions (W x H x D): | 10.5 mm x 34.6 mm x 71.9 mm | ||
| Sensing range max.: | 0 mm ... 1,000 mm, through-beam system 1)2) | ||
| Диапазон измерений: | 0 m ... 850 mm, through-beam system, 0 mm ... 400 mm, proximity system 3)4)5)6) | ||
| Источник света: | LED 7) | ||
| Type of light: | Infrared light | ||
| Длина волны: | 1,450 nm | ||
| Регулировка чувствительности: | Teach-in button cable +/- increment button, manual |
||
| Adjustment of operating distance: | Cable, +/- increment button, manual, Teach-in button | ||
| Teach-in: | Menu-controlled | ||
| Time type: | Without time delay time delay off switch on delay ON and OFF delay one shot |
||
| Время задержки: | Programmable: 0 ... 9,999 ms | ||
| Индикатор: | Display | ||
| Sensor/detection principle: | Fiber-optic photoelectric sensor | ||
| Angle of dispersion: | Ca. 65 ° | ||
| Housing design (light emission): | Rectangular | ||
| Display: | LED status display / 2x 4-character digital dual displays, Set value (green indicator) and actual value (red indicator) are displayed simultaneously, display of parameters | ||
| Механика/электроника | |||
| Enclosure rating: | IP 50 1) | ||
| Supply voltage: | 12 V DC ... 24 V DC 2) | ||
| Пульсации: | ≤ 10 % 3) | ||
| Потребляемая мощность: | ≤ 50 mA 4) | ||
| Output type: | PNP, Light/dark-switching, manually selectable, open collector | ||
| Output current Imax.: | ≤ 100 mA | ||
| Response time: | ≤ 2 ms ≤ 8 ms ≤ 16 µs ≤ 70 µs ≤ 250 µs 5) |
||
| Частота переключений: | 31.2 kHz 7.1 kHz 2 kHz 250 Hz 62.5 Hz |
||
| Тип подключения: | Connector M8, 4-pin | ||
| Класс защиты: | III | ||
| Защита цепи: | A, B, C, D 6)7)8)9) | ||
| Special device: | 0 | ||
| Материал корпуса: | ABS/PC | ||
| Ambient operating temperature: | -25 °C ... 55 °C | ||
| Температура хранения: | -40 °C ... 70 °C | ||
At a glance
| Selectable response time up to 16 µs |
| Sensing range up to 20 m, sensing distance up to 1400 mm |
| Bus-compatible with anti-interference |
| 2 x 4-digit display |
| Adjustable hysteresis |
| Rotatable display screen |
| High-resolution signal processing |
| Programmable time delays |
Your benefits
| Reliable, rapid process detection, even under the most difficult ambient conditions, such as dust, spray or mist |
| Easy commissioning and product changeover due to external teach-in |
| Cross-talk is eliminated when utilizing bus configuration option |
| Quick, easy setup and adjustment due to an intuitive operating menu |
| Flexible parameter adjustment due to high-resolution signal processing. Hysteresis and time delays can be adapted to suit the application, e.g., when detecting tiny or transparent objects |
| Easy-to-read display, even under difficult installation conditions |
| Features | |||
| Тип устройства: | Stand-alone | ||
| Dimensions (W x H x D): | 10.5 mm x 34.6 mm x 71.9 mm | ||
| Sensing range max.: | 0 mm ... 1,000 mm, through-beam system 1)2) | ||
| Диапазон измерений: | 0 m ... 850 mm, through-beam system, 0 mm ... 400 mm, proximity system 3)4)5)6) | ||
| Источник света: | LED 7) | ||
| Type of light: | Infrared light | ||
| Длина волны: | 1,450 nm | ||
| Регулировка чувствительности: | Teach-in button cable +/- increment button, manual |
||
| Adjustment of operating distance: | Cable, +/- increment button, manual, Teach-in button | ||
| Teach-in: | Menu-controlled | ||
| Time type: | Without time delay time delay off switch on delay ON and OFF delay one shot |
||
| Время задержки: | Programmable: 0 ... 9,999 ms | ||
| Индикатор: | Display | ||
| Sensor/detection principle: | Fiber-optic photoelectric sensor | ||
| Angle of dispersion: | Ca. 65 ° | ||
| Housing design (light emission): | Rectangular | ||
| Display: | LED status display / 2x 4-character digital dual displays, Set value (green indicator) and actual value (red indicator) are displayed simultaneously, display of parameters | ||
| Механика/электроника | |||
| Enclosure rating: | IP 50 1) | ||
| Supply voltage: | 12 V DC ... 24 V DC 2) | ||
| Пульсации: | ≤ 10 % 3) | ||
| Потребляемая мощность: | ≤ 50 mA 4) | ||
| Output type: | PNP, Light/dark-switching, manually selectable, open collector | ||
| Output current Imax.: | ≤ 100 mA | ||
| Response time: | ≤ 2 ms ≤ 8 ms ≤ 16 µs ≤ 70 µs ≤ 250 µs 5) |
||
| Частота переключений: | 31.2 kHz 7.1 kHz 2 kHz 250 Hz 62.5 Hz |
||
| Тип подключения: | Connector M8, 4-pin | ||
| Класс защиты: | III | ||
| Защита цепи: | A, B, C, D 6)7)8)9) | ||
| Special device: | 1 | ||
| Материал корпуса: | ABS/PC | ||
| Ambient operating temperature: | -25 °C ... 55 °C | ||
| Температура хранения: | -40 °C ... 70 °C | ||
At a glance
| Selectable response time up to 16 µs |
| Sensing range up to 20 m (Through-beam system); up to 1400 mm (proximity system) |
| Bus-compatible with anti-interference |
| 2 x 4-digit display |
| Adjustable hysteresis |
| Rotatable display screen |
| High-resolution signal processing |
| Programmable time delays |
Your benefits
| Reliable, rapid process detection, even under the most difficult ambient conditions, such as dust, spray or mist |
| Easy commissioning and product changeover due to external teach-in |
| Cross-talk is eliminated when utilizing bus configuration option |
| Quick, easy setup and adjustment due to an intuitive operating menu |
| Flexible parameter adjustment due to high-resolution signal processing. Hysteresis and time delays can be adapted to suit the application, e.g., when detecting tiny or transparent objects |
| Easy-to-read display, even under difficult installation conditions |
| Features | |||
| Тип устройства: | Stand-alone | ||
| Dimensions (W x H x D): | 10.5 mm x 34.6 mm x 71.9 mm | ||
| Sensing range max.: | 0 mm ... 1,000 mm, through-beam system 1)2) | ||
| Диапазон измерений: | 0 m ... 850 mm, through-beam system, 0 mm ... 400 mm, proximity system 3)4)5)6) | ||
| Источник света: | LED 7) | ||
| Type of light: | Infrared light | ||
| Teach-in: | Menu-controlled | ||
| Time type: | Without time delay time delay off switch on delay ON and OFF delay one shot |
||
| Время задержки: | Programmable: 0 ... 9,999 ms | ||
| Индикатор: | Display | ||
| Sensor/detection principle: | Fiber-optic photoelectric sensor | ||
| Angle of dispersion: | Ca. 65 ° | ||
| Housing design (light emission): | Rectangular | ||
| Display: | LED status display / 2x 4-character digital dual displays, Set value (green indicator) and actual value (red indicator) are displayed simultaneously, display of parameters | ||
| Фокус: | See LL3 fiber-optic data | ||
| Механика/электроника | |||
| Enclosure rating: | IP 50 1) | ||
| Supply voltage: | 12 V DC ... 24 V DC 2) | ||
| Пульсации: | ≤ 10 % 3) | ||
| Потребляемая мощность: | ≤ 50 mA 4) | ||
| Output type: | PNP, open collector | ||
| Output current Imax.: | ≤ 100 mA | ||
| Response time: | ≤ 2 ms ≤ 8 ms ≤ 16 µs ≤ 70 µs ≤ 250 µs 5) |
||
| Частота переключений: | ± 31.2 kHz ± 7.1 kHz ± 2 kHz ± 250 Hz ± 62.5 Hz |
||
| Тип подключения: | Connector M8, 4-pin | ||
| Класс защиты: | III | ||
| Защита цепи: | A, B, C, D 6)7)8)9) | ||
| Special device: | 0 | ||
| Материал корпуса: | ABS/PC, Plastic | ||
| Ambient operating temperature: | -25 °C ... +55 °C | ||
| Температура хранения: | -40 °C ... +70 °C | ||
| Вес: | Ca. 20 g | ||
| Режим переключения: | Светлое/темное переключение | ||
| Режим переключения селектора: | Manually selectable | ||
| UL File No.: | NRKH2.E300503 & NRKH8.E300503 | ||