+7 (812) 432-38-38
+7 (812) 432-36-36
Пн-Пт 9:00 — 18:00
 
Заказать оборудование
 

SFS/SFM60

 
 
Страницы:



Арт. -*

* When ordering for the first time, please use the information in "Model Name" instead of "Part No."

At a glance

  • HIPERFACE® motor feedback system in singleturn and multiturn design, compatible with the world's leading drive systems
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Mechanical flexibility through different blind hollow shaft and through hollow shaft diameters (8 to 15 mm diameter), available with various torque supports
  • Unique ball bearing design, allowing for a ball bearing distance of 30 mm.
  • Universal cable outlet and common connector versions
  • Protection class IP 65

    Your benefits

  • Convenient traceability and simple maintenance thanks to storage of motor-specific data in the electronic type label
  • Large ball bearing distances reduce uneven wear and minimize vibration on the encoder housing, which increases the encoder's service life
  • The nickel code disk offers a high degree of vibration resistance and an extended temperature range
  • Shorter development times through standardized mechanical interface
  • Platform for the future, since all electrical interfaces (TTL/HTL, 1Vpp, SSI, PROFIBUS, HIPERFACE DSL®) are or will be available in this mechanical component.
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 4,096 (Multiturn)
    Total number of steps: 134,217,728
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Error limits for the digital absolute value: ± 90 angular seconds (via RS485)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    without mechanical tension of the stator coupling
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 1,792 Byte (EEPROM 2048)
    Mechanical data
    Диаметр вала: 1/2 "
    Shaft plug-in length: 15 mm
    Тип фланца/муфты статора: Version 2
    Dimensions: See dimensional drawing
    Масса: 0.2 kg
    Moment of inertia of the rotor: 40 gcm²
    Maximum operating speed: 9,000 /min 1)
    Maximum angular acceleration: 50,000 rad/s²
    Момент вращения: 0.6 Ncm (20 °C)
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Допустимое перемещение вала, радиальное статические: ± 0.3 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.1 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.5 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Cable, 8-pin, radial, 1.5 m
    Shaft version: Through hollow shaft
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... 115 °C
    Storage temperature range: -40 °C ... 115 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
    EMC: According to EN 61000-6-2 and EN 61000-6-3 1)
    Enclosure rating: IP 65, according to IEC 60529, with mating connector inserted
     
    Арт. -*

    * When ordering for the first time, please use the information in "Model Name" instead of "Part No."

    At a glance

  • HIPERFACE® motor feedback system in singleturn and multiturn design, compatible with the world's leading drive systems
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Mechanical flexibility through different blind hollow shaft and through hollow shaft diameters (8 to 15 mm diameter), available with various torque supports
  • Unique ball bearing design, allowing for a ball bearing distance of 30 mm.
  • Universal cable outlet and common connector versions
  • Protection class IP 65

    Your benefits

  • Convenient traceability and simple maintenance thanks to storage of motor-specific data in the electronic type label
  • Large ball bearing distances reduce uneven wear and minimize vibration on the encoder housing, which increases the encoder's service life
  • The nickel code disk offers a high degree of vibration resistance and an extended temperature range
  • Shorter development times through standardized mechanical interface
  • Platform for the future, since all electrical interfaces (TTL/HTL, 1Vpp, SSI, PROFIBUS, HIPERFACE DSL®) are or will be available in this mechanical component.
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 4,096 (Multiturn)
    Total number of steps: 134,217,728
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Error limits for the digital absolute value: ± 90 angular seconds (via RS485)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    without mechanical tension of the stator coupling
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 1,792 Byte (EEPROM 2048)
    Mechanical data
    Диаметр вала: 1/2 "
    Shaft plug-in length: 15 mm
    Тип фланца/муфты статора: Version 3
    Dimensions: See dimensional drawing
    Масса: 0.2 kg
    Moment of inertia of the rotor: 40 gcm²
    Maximum operating speed: 9,000 /min 1)
    Maximum angular acceleration: 50,000 rad/s²
    Момент вращения: 0.6 Ncm (20 °C)
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Допустимое перемещение вала, радиальное статические: ± 0.3 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.1 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.5 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Cable, 8-pin, radial, 1.5 m
    Shaft version: Through hollow shaft
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... 115 °C
    Storage temperature range: -40 °C ... 115 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
    EMC: According to EN 61000-6-2 and EN 61000-6-3 1)
    Enclosure rating: IP 65, according to IEC 60529, with mating connector inserted
     
    Арт. 1052167

    At a glance

  • HIPERFACE® motor feedback system in singleturn and multiturn design, compatible with the world's leading drive systems
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Mechanical flexibility through different blind hollow shaft and through hollow shaft diameters (8 to 15 mm diameter), available with various torque supports
  • Unique ball bearing design, allowing for a ball bearing distance of 30 mm.
  • Universal cable outlet and common connector versions
  • Protection class IP 65

    Your benefits

  • Convenient traceability and simple maintenance thanks to storage of motor-specific data in the electronic type label
  • Large ball bearing distances reduce uneven wear and minimize vibration on the encoder housing, which increases the encoder's service life
  • The nickel code disk offers a high degree of vibration resistance and an extended temperature range
  • Shorter development times through standardized mechanical interface
  • Platform for the future, since all electrical interfaces (TTL/HTL, 1Vpp, SSI, PROFIBUS, HIPERFACE DSL®) are or will be available in this mechanical component.
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 4,096 (Multiturn)
    Total number of steps: 134,217,728
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Error limits for the digital absolute value: ± 90 angular seconds (via RS485)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    without mechanical tension of the stator coupling
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 1,792 Byte (EEPROM 2048)
    Mechanical data
    Диаметр вала: 1/2 "
    Shaft plug-in length: 15 mm
    Тип фланца/муфты статора: Version 4
    Dimensions: See dimensional drawing
    Масса: 0.2 kg
    Moment of inertia of the rotor: 40 gcm²
    Maximum operating speed: 9,000 /min 1)
    Maximum angular acceleration: 50,000 rad/s²
    Момент вращения: 0.6 Ncm (20 °C)
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Допустимое перемещение вала, радиальное статические: ± 0.3 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.1 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.5 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Cable, 8-pin, radial, 1.5 m
    Shaft version: Through hollow shaft
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... 115 °C
    Storage temperature range: -40 °C ... 115 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
    EMC: According to EN 61000-6-2 and EN 61000-6-3 1)
    Enclosure rating: IP 65, according to IEC 60529, with mating connector inserted
     
    Арт. 1051311

    At a glance

  • HIPERFACE® motor feedback system in singleturn and multiturn design, compatible with the world's leading drive systems
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Mechanical flexibility through different blind hollow shaft and through hollow shaft diameters (8 to 15 mm diameter), available with various torque supports
  • Unique ball bearing design, allowing for a ball bearing distance of 30 mm.
  • Universal cable outlet and common connector versions
  • Protection class IP 65

    Your benefits

  • Convenient traceability and simple maintenance thanks to storage of motor-specific data in the electronic type label
  • Large ball bearing distances reduce uneven wear and minimize vibration on the encoder housing, which increases the encoder's service life
  • The nickel code disk offers a high degree of vibration resistance and an extended temperature range
  • Shorter development times through standardized mechanical interface
  • Platform for the future, since all electrical interfaces (TTL/HTL, 1Vpp, SSI, PROFIBUS, HIPERFACE DSL®) are or will be available in this mechanical component.
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 4,096 (Multiturn)
    Total number of steps: 134,217,728
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Error limits for the digital absolute value: ± 90 angular seconds (via RS485)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    without mechanical tension of the stator coupling
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 1,792 Byte (EEPROM 2048)
    Mechanical data
    Диаметр вала: 15 mm
    Shaft plug-in length: 15 mm
    Тип фланца/муфты статора: Standard version
    Dimensions: See dimensional drawing
    Масса: 0.2 kg
    Moment of inertia of the rotor: 40 gcm²
    Maximum operating speed: 9,000 /min 1)
    Maximum angular acceleration: 50,000 rad/s²
    Момент вращения: 0.6 Ncm (20 °C)
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Допустимое перемещение вала, радиальное статические: ± 0.3 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.1 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.5 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Cable, 8-pin, radial, 1.5 m
    Shaft version: Through hollow shaft
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... 115 °C
    Storage temperature range: -40 °C ... 115 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
    EMC: According to EN 61000-6-2 and EN 61000-6-3 1)
    Enclosure rating: IP 65, according to IEC 60529, with mating connector inserted
     
    Арт. -*

    * When ordering for the first time, please use the information in "Model Name" instead of "Part No."

    At a glance

  • HIPERFACE® motor feedback system in singleturn and multiturn design, compatible with the world's leading drive systems
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Mechanical flexibility through different blind hollow shaft and through hollow shaft diameters (8 to 15 mm diameter), available with various torque supports
  • Unique ball bearing design, allowing for a ball bearing distance of 30 mm.
  • Universal cable outlet and common connector versions
  • Protection class IP 65

    Your benefits

  • Convenient traceability and simple maintenance thanks to storage of motor-specific data in the electronic type label
  • Large ball bearing distances reduce uneven wear and minimize vibration on the encoder housing, which increases the encoder's service life
  • The nickel code disk offers a high degree of vibration resistance and an extended temperature range
  • Shorter development times through standardized mechanical interface
  • Platform for the future, since all electrical interfaces (TTL/HTL, 1Vpp, SSI, PROFIBUS, HIPERFACE DSL®) are or will be available in this mechanical component.
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 4,096 (Multiturn)
    Total number of steps: 134,217,728
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Error limits for the digital absolute value: ± 90 angular seconds (via RS485)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    without mechanical tension of the stator coupling
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 1,792 Byte (EEPROM 2048)
    Mechanical data
    Диаметр вала: 15 mm
    Shaft plug-in length: 15 mm
    Тип фланца/муфты статора: Version 1
    Dimensions: See dimensional drawing
    Масса: 0.2 kg
    Moment of inertia of the rotor: 40 gcm²
    Maximum operating speed: 9,000 /min 1)
    Maximum angular acceleration: 50,000 rad/s²
    Момент вращения: 0.6 Ncm (20 °C)
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Допустимое перемещение вала, радиальное статические: ± 0.3 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.1 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.5 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Cable, 8-pin, radial, 1.5 m
    Shaft version: Through hollow shaft
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... 115 °C
    Storage temperature range: -40 °C ... 115 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
    EMC: According to EN 61000-6-2 and EN 61000-6-3 1)
    Enclosure rating: IP 65, according to IEC 60529, with mating connector inserted
     
    Арт. -*

    * When ordering for the first time, please use the information in "Model Name" instead of "Part No."

    At a glance

  • HIPERFACE® motor feedback system in singleturn and multiturn design, compatible with the world's leading drive systems
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Mechanical flexibility through different blind hollow shaft and through hollow shaft diameters (8 to 15 mm diameter), available with various torque supports
  • Unique ball bearing design, allowing for a ball bearing distance of 30 mm.
  • Universal cable outlet and common connector versions
  • Protection class IP 65

    Your benefits

  • Convenient traceability and simple maintenance thanks to storage of motor-specific data in the electronic type label
  • Large ball bearing distances reduce uneven wear and minimize vibration on the encoder housing, which increases the encoder's service life
  • The nickel code disk offers a high degree of vibration resistance and an extended temperature range
  • Shorter development times through standardized mechanical interface
  • Platform for the future, since all electrical interfaces (TTL/HTL, 1Vpp, SSI, PROFIBUS, HIPERFACE DSL®) are or will be available in this mechanical component.
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 4,096 (Multiturn)
    Total number of steps: 134,217,728
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Error limits for the digital absolute value: ± 90 angular seconds (via RS485)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    without mechanical tension of the stator coupling
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 1,792 Byte (EEPROM 2048)
    Mechanical data
    Диаметр вала: 15 mm
    Shaft plug-in length: 15 mm
    Тип фланца/муфты статора: Version 2
    Dimensions: See dimensional drawing
    Масса: 0.2 kg
    Moment of inertia of the rotor: 40 gcm²
    Maximum operating speed: 9,000 /min 1)
    Maximum angular acceleration: 50,000 rad/s²
    Момент вращения: 0.6 Ncm (20 °C)
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Допустимое перемещение вала, радиальное статические: ± 0.3 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.1 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.5 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Cable, 8-pin, radial, 1.5 m
    Shaft version: Through hollow shaft
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... 115 °C
    Storage temperature range: -40 °C ... 115 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
    EMC: According to EN 61000-6-2 and EN 61000-6-3 1)
    Enclosure rating: IP 65, according to IEC 60529, with mating connector inserted
     
    Арт. -*

    * When ordering for the first time, please use the information in "Model Name" instead of "Part No."

    At a glance

  • HIPERFACE® motor feedback system in singleturn and multiturn design, compatible with the world's leading drive systems
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Mechanical flexibility through different blind hollow shaft and through hollow shaft diameters (8 to 15 mm diameter), available with various torque supports
  • Unique ball bearing design, allowing for a ball bearing distance of 30 mm.
  • Universal cable outlet and common connector versions
  • Protection class IP 65

    Your benefits

  • Convenient traceability and simple maintenance thanks to storage of motor-specific data in the electronic type label
  • Large ball bearing distances reduce uneven wear and minimize vibration on the encoder housing, which increases the encoder's service life
  • The nickel code disk offers a high degree of vibration resistance and an extended temperature range
  • Shorter development times through standardized mechanical interface
  • Platform for the future, since all electrical interfaces (TTL/HTL, 1Vpp, SSI, PROFIBUS, HIPERFACE DSL®) are or will be available in this mechanical component.
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 4,096 (Multiturn)
    Total number of steps: 134,217,728
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Error limits for the digital absolute value: ± 90 angular seconds (via RS485)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    without mechanical tension of the stator coupling
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 1,792 Byte (EEPROM 2048)
    Mechanical data
    Диаметр вала: 15 mm
    Shaft plug-in length: 15 mm
    Тип фланца/муфты статора: Version 3
    Dimensions: See dimensional drawing
    Масса: 0.2 kg
    Moment of inertia of the rotor: 40 gcm²
    Maximum operating speed: 9,000 /min 1)
    Maximum angular acceleration: 50,000 rad/s²
    Момент вращения: 0.6 Ncm (20 °C)
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Допустимое перемещение вала, радиальное статические: ± 0.3 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.1 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.5 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Cable, 8-pin, radial, 1.5 m
    Shaft version: Through hollow shaft
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... 115 °C
    Storage temperature range: -40 °C ... 115 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
    EMC: According to EN 61000-6-2 and EN 61000-6-3 1)
    Enclosure rating: IP 65, according to IEC 60529, with mating connector inserted
     
    Арт. -*

    * When ordering for the first time, please use the information in "Model Name" instead of "Part No."

    At a glance

  • HIPERFACE® motor feedback system in singleturn and multiturn design, compatible with the world's leading drive systems
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Mechanical flexibility through different blind hollow shaft and through hollow shaft diameters (8 to 15 mm diameter), available with various torque supports
  • Unique ball bearing design, allowing for a ball bearing distance of 30 mm.
  • Universal cable outlet and common connector versions
  • Protection class IP 65

    Your benefits

  • Convenient traceability and simple maintenance thanks to storage of motor-specific data in the electronic type label
  • Large ball bearing distances reduce uneven wear and minimize vibration on the encoder housing, which increases the encoder's service life
  • The nickel code disk offers a high degree of vibration resistance and an extended temperature range
  • Shorter development times through standardized mechanical interface
  • Platform for the future, since all electrical interfaces (TTL/HTL, 1Vpp, SSI, PROFIBUS, HIPERFACE DSL®) are or will be available in this mechanical component.
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 4,096 (Multiturn)
    Total number of steps: 134,217,728
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Error limits for the digital absolute value: ± 90 angular seconds (via RS485)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    without mechanical tension of the stator coupling
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 1,792 Byte (EEPROM 2048)
    Mechanical data
    Диаметр вала: 15 mm
    Shaft plug-in length: 15 mm
    Тип фланца/муфты статора: Version 4
    Dimensions: See dimensional drawing
    Масса: 0.2 kg
    Moment of inertia of the rotor: 40 gcm²
    Maximum operating speed: 9,000 /min 1)
    Maximum angular acceleration: 50,000 rad/s²
    Момент вращения: 0.6 Ncm (20 °C)
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Допустимое перемещение вала, радиальное статические: ± 0.3 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.1 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.5 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Cable, 8-pin, radial, 1.5 m
    Shaft version: Through hollow shaft
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... 115 °C
    Storage temperature range: -40 °C ... 115 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
    EMC: According to EN 61000-6-2 and EN 61000-6-3 1)
    Enclosure rating: IP 65, according to IEC 60529, with mating connector inserted
     
    Арт. 1050527

    At a glance

  • HIPERFACE® motor feedback system in singleturn and multiturn design, compatible with the world's leading drive systems
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Mechanical flexibility through different blind hollow shaft and through hollow shaft diameters (8 to 15 mm diameter), available with various torque supports
  • Unique ball bearing design, allowing for a ball bearing distance of 30 mm.
  • Universal cable outlet and common connector versions
  • Protection class IP 65

    Your benefits

  • Convenient traceability and simple maintenance thanks to storage of motor-specific data in the electronic type label
  • Large ball bearing distances reduce uneven wear and minimize vibration on the encoder housing, which increases the encoder's service life
  • The nickel code disk offers a high degree of vibration resistance and an extended temperature range
  • Shorter development times through standardized mechanical interface
  • Platform for the future, since all electrical interfaces (TTL/HTL, 1Vpp, SSI, PROFIBUS, HIPERFACE DSL®) are or will be available in this mechanical component.
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 4,096 (Multiturn)
    Total number of steps: 134,217,728
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Error limits for the digital absolute value: ± 90 angular seconds (via RS485)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    without mechanical tension of the stator coupling
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 1,792 Byte (EEPROM 2048)
    Mechanical data
    Диаметр вала: 14 mm
    Shaft plug-in length: 15 mm
    Тип фланца/муфты статора: Standard version
    Dimensions: See dimensional drawing
    Масса: 0.2 kg
    Moment of inertia of the rotor: 40 gcm²
    Maximum operating speed: 9,000 /min 1)
    Maximum angular acceleration: 50,000 rad/s²
    Момент вращения: 0.6 Ncm (20 °C)
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Допустимое перемещение вала, радиальное статические: ± 0.3 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.1 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.5 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Cable, 8-pin, radial, 1.5 m
    Shaft version: Through hollow shaft
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... 115 °C
    Storage temperature range: -40 °C ... 115 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
    EMC: According to EN 61000-6-2 and EN 61000-6-3 1)
    Enclosure rating: IP 65, according to IEC 60529, with mating connector inserted
     
    Арт. -*

    * When ordering for the first time, please use the information in "Model Name" instead of "Part No."

    At a glance

  • HIPERFACE® motor feedback system in singleturn and multiturn design, compatible with the world's leading drive systems
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Mechanical flexibility through different blind hollow shaft and through hollow shaft diameters (8 to 15 mm diameter), available with various torque supports
  • Unique ball bearing design, allowing for a ball bearing distance of 30 mm.
  • Universal cable outlet and common connector versions
  • Protection class IP 65

    Your benefits

  • Convenient traceability and simple maintenance thanks to storage of motor-specific data in the electronic type label
  • Large ball bearing distances reduce uneven wear and minimize vibration on the encoder housing, which increases the encoder's service life
  • The nickel code disk offers a high degree of vibration resistance and an extended temperature range
  • Shorter development times through standardized mechanical interface
  • Platform for the future, since all electrical interfaces (TTL/HTL, 1Vpp, SSI, PROFIBUS, HIPERFACE DSL®) are or will be available in this mechanical component.
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 4,096 (Multiturn)
    Total number of steps: 134,217,728
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Error limits for the digital absolute value: ± 90 angular seconds (via RS485)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    without mechanical tension of the stator coupling
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 1,792 Byte (EEPROM 2048)
    Mechanical data
    Диаметр вала: 14 mm
    Shaft plug-in length: 15 mm
    Тип фланца/муфты статора: Version 1
    Dimensions: See dimensional drawing
    Масса: 0.2 kg
    Moment of inertia of the rotor: 40 gcm²
    Maximum operating speed: 9,000 /min 1)
    Maximum angular acceleration: 50,000 rad/s²
    Момент вращения: 0.6 Ncm (20 °C)
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Допустимое перемещение вала, радиальное статические: ± 0.3 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.1 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.5 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Cable, 8-pin, radial, 1.5 m
    Shaft version: Through hollow shaft
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... 115 °C
    Storage temperature range: -40 °C ... 115 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
    EMC: According to EN 61000-6-2 and EN 61000-6-3 1)
    Enclosure rating: IP 65, according to IEC 60529, with mating connector inserted
     
    Арт. -*

    * When ordering for the first time, please use the information in "Model Name" instead of "Part No."

    At a glance

  • HIPERFACE® motor feedback system in singleturn and multiturn design, compatible with the world's leading drive systems
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Mechanical flexibility through different blind hollow shaft and through hollow shaft diameters (8 to 15 mm diameter), available with various torque supports
  • Unique ball bearing design, allowing for a ball bearing distance of 30 mm.
  • Universal cable outlet and common connector versions
  • Protection class IP 65

    Your benefits

  • Convenient traceability and simple maintenance thanks to storage of motor-specific data in the electronic type label
  • Large ball bearing distances reduce uneven wear and minimize vibration on the encoder housing, which increases the encoder's service life
  • The nickel code disk offers a high degree of vibration resistance and an extended temperature range
  • Shorter development times through standardized mechanical interface
  • Platform for the future, since all electrical interfaces (TTL/HTL, 1Vpp, SSI, PROFIBUS, HIPERFACE DSL®) are or will be available in this mechanical component.
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 4,096 (Multiturn)
    Total number of steps: 134,217,728
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Error limits for the digital absolute value: ± 90 angular seconds (via RS485)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    without mechanical tension of the stator coupling
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 1,792 Byte (EEPROM 2048)
    Mechanical data
    Диаметр вала: 14 mm
    Shaft plug-in length: 15 mm
    Тип фланца/муфты статора: Version 2
    Dimensions: See dimensional drawing
    Масса: 0.2 kg
    Moment of inertia of the rotor: 40 gcm²
    Maximum operating speed: 9,000 /min 1)
    Maximum angular acceleration: 50,000 rad/s²
    Момент вращения: 0.6 Ncm (20 °C)
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Допустимое перемещение вала, радиальное статические: ± 0.3 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.1 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.5 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Cable, 8-pin, radial, 1.5 m
    Shaft version: Through hollow shaft
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... 115 °C
    Storage temperature range: -40 °C ... 115 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
    EMC: According to EN 61000-6-2 and EN 61000-6-3 1)
    Enclosure rating: IP 65, according to IEC 60529, with mating connector inserted
     
    Арт. -*

    * When ordering for the first time, please use the information in "Model Name" instead of "Part No."

    At a glance

  • HIPERFACE® motor feedback system in singleturn and multiturn design, compatible with the world's leading drive systems
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Mechanical flexibility through different blind hollow shaft and through hollow shaft diameters (8 to 15 mm diameter), available with various torque supports
  • Unique ball bearing design, allowing for a ball bearing distance of 30 mm.
  • Universal cable outlet and common connector versions
  • Protection class IP 65

    Your benefits

  • Convenient traceability and simple maintenance thanks to storage of motor-specific data in the electronic type label
  • Large ball bearing distances reduce uneven wear and minimize vibration on the encoder housing, which increases the encoder's service life
  • The nickel code disk offers a high degree of vibration resistance and an extended temperature range
  • Shorter development times through standardized mechanical interface
  • Platform for the future, since all electrical interfaces (TTL/HTL, 1Vpp, SSI, PROFIBUS, HIPERFACE DSL®) are or will be available in this mechanical component.
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 4,096 (Multiturn)
    Total number of steps: 134,217,728
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Error limits for the digital absolute value: ± 90 angular seconds (via RS485)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    without mechanical tension of the stator coupling
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 1,792 Byte (EEPROM 2048)
    Mechanical data
    Диаметр вала: 14 mm
    Shaft plug-in length: 15 mm
    Тип фланца/муфты статора: Version 3
    Dimensions: See dimensional drawing
    Масса: 0.2 kg
    Moment of inertia of the rotor: 40 gcm²
    Maximum operating speed: 9,000 /min 1)
    Maximum angular acceleration: 50,000 rad/s²
    Момент вращения: 0.6 Ncm (20 °C)
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Допустимое перемещение вала, радиальное статические: ± 0.3 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.1 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.5 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Cable, 8-pin, radial, 1.5 m
    Shaft version: Through hollow shaft
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... 115 °C
    Storage temperature range: -40 °C ... 115 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
    EMC: According to EN 61000-6-2 and EN 61000-6-3 1)
    Enclosure rating: IP 65, according to IEC 60529, with mating connector inserted
     
    Арт. 1052161

    At a glance

  • HIPERFACE® motor feedback system in singleturn and multiturn design, compatible with the world's leading drive systems
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Mechanical flexibility through different blind hollow shaft and through hollow shaft diameters (8 to 15 mm diameter), available with various torque supports
  • Unique ball bearing design, allowing for a ball bearing distance of 30 mm.
  • Universal cable outlet and common connector versions
  • Protection class IP 65

    Your benefits

  • Convenient traceability and simple maintenance thanks to storage of motor-specific data in the electronic type label
  • Large ball bearing distances reduce uneven wear and minimize vibration on the encoder housing, which increases the encoder's service life
  • The nickel code disk offers a high degree of vibration resistance and an extended temperature range
  • Shorter development times through standardized mechanical interface
  • Platform for the future, since all electrical interfaces (TTL/HTL, 1Vpp, SSI, PROFIBUS, HIPERFACE DSL®) are or will be available in this mechanical component.
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 4,096 (Multiturn)
    Total number of steps: 134,217,728
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Error limits for the digital absolute value: ± 90 angular seconds (via RS485)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    without mechanical tension of the stator coupling
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 1,792 Byte (EEPROM 2048)
    Mechanical data
    Диаметр вала: 14 mm
    Shaft plug-in length: 15 mm
    Тип фланца/муфты статора: Version 4
    Dimensions: See dimensional drawing
    Масса: 0.2 kg
    Moment of inertia of the rotor: 40 gcm²
    Maximum operating speed: 9,000 /min 1)
    Maximum angular acceleration: 50,000 rad/s²
    Момент вращения: 0.6 Ncm (20 °C)
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Допустимое перемещение вала, радиальное статические: ± 0.3 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.1 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.5 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Cable, 8-pin, radial, 1.5 m
    Shaft version: Through hollow shaft
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... 115 °C
    Storage temperature range: -40 °C ... 115 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
    EMC: According to EN 61000-6-2 and EN 61000-6-3 1)
    Enclosure rating: IP 65, according to IEC 60529, with mating connector inserted
     
    Арт. -*

    * When ordering for the first time, please use the information in "Model Name" instead of "Part No."

    At a glance

  • HIPERFACE® motor feedback system in singleturn and multiturn design, compatible with the world's leading drive systems
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Mechanical flexibility through different blind hollow shaft and through hollow shaft diameters (8 to 15 mm diameter), available with various torque supports
  • Unique ball bearing design, allowing for a ball bearing distance of 30 mm.
  • Universal cable outlet and common connector versions
  • Protection class IP 65

    Your benefits

  • Convenient traceability and simple maintenance thanks to storage of motor-specific data in the electronic type label
  • Large ball bearing distances reduce uneven wear and minimize vibration on the encoder housing, which increases the encoder's service life
  • The nickel code disk offers a high degree of vibration resistance and an extended temperature range
  • Shorter development times through standardized mechanical interface
  • Platform for the future, since all electrical interfaces (TTL/HTL, 1Vpp, SSI, PROFIBUS, HIPERFACE DSL®) are or will be available in this mechanical component.
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 1 (Singleturn)
    Total number of steps: 32,768
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Error limits for the digital absolute value: ± 90 angular seconds (via RS485)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    without mechanical tension of the stator coupling
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 1,792 Byte (EEPROM 2048)
    Mechanical data
    Диаметр вала: 3/8 "
    Shaft plug-in length: 15 mm ... 42 mm
    Тип фланца/муфты статора: Standard version
    Dimensions: See dimensional drawing
    Масса: 0.2 kg
    Moment of inertia of the rotor: 40 gcm²
    Maximum operating speed: 9,000 /min 1)
    Maximum angular acceleration: 50,000 rad/s²
    Момент вращения: 0.6 Ncm (20 °C)
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Допустимое перемещение вала, радиальное статические: ± 0.3 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.1 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.5 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Connector M23, 12-pin, radial
    Shaft version: Blind hollow shaft
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... 115 °C
    Storage temperature range: -40 °C ... 115 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
    EMC: According to EN 61000-6-2 and EN 61000-6-3 1)
    Enclosure rating: IP 65, according to IEC 60529, with mating connector inserted
     
    Арт. -*

    * When ordering for the first time, please use the information in "Model Name" instead of "Part No."

    At a glance

  • HIPERFACE® motor feedback system in singleturn and multiturn design, compatible with the world's leading drive systems
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Mechanical flexibility through different blind hollow shaft and through hollow shaft diameters (8 to 15 mm diameter), available with various torque supports
  • Unique ball bearing design, allowing for a ball bearing distance of 30 mm.
  • Universal cable outlet and common connector versions
  • Protection class IP 65

    Your benefits

  • Convenient traceability and simple maintenance thanks to storage of motor-specific data in the electronic type label
  • Large ball bearing distances reduce uneven wear and minimize vibration on the encoder housing, which increases the encoder's service life
  • The nickel code disk offers a high degree of vibration resistance and an extended temperature range
  • Shorter development times through standardized mechanical interface
  • Platform for the future, since all electrical interfaces (TTL/HTL, 1Vpp, SSI, PROFIBUS, HIPERFACE DSL®) are or will be available in this mechanical component.
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 1 (Singleturn)
    Total number of steps: 32,768
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Error limits for the digital absolute value: ± 90 angular seconds (via RS485)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    without mechanical tension of the stator coupling
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 1,792 Byte (EEPROM 2048)
    Mechanical data
    Диаметр вала: 3/8 "
    Shaft plug-in length: 15 mm ... 42 mm
    Тип фланца/муфты статора: Version 1
    Dimensions: See dimensional drawing
    Масса: 0.2 kg
    Moment of inertia of the rotor: 40 gcm²
    Maximum operating speed: 9,000 /min 1)
    Maximum angular acceleration: 50,000 rad/s²
    Момент вращения: 0.6 Ncm (20 °C)
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Допустимое перемещение вала, радиальное статические: ± 0.3 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.1 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.5 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Connector M23, 12-pin, radial
    Shaft version: Blind hollow shaft
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... 115 °C
    Storage temperature range: -40 °C ... 115 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
    EMC: According to EN 61000-6-2 and EN 61000-6-3 1)
    Enclosure rating: IP 65, according to IEC 60529, with mating connector inserted
     
    Арт. -*

    * When ordering for the first time, please use the information in "Model Name" instead of "Part No."

    At a glance

  • HIPERFACE® motor feedback system in singleturn and multiturn design, compatible with the world's leading drive systems
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Mechanical flexibility through different blind hollow shaft and through hollow shaft diameters (8 to 15 mm diameter), available with various torque supports
  • Unique ball bearing design, allowing for a ball bearing distance of 30 mm.
  • Universal cable outlet and common connector versions
  • Protection class IP 65

    Your benefits

  • Convenient traceability and simple maintenance thanks to storage of motor-specific data in the electronic type label
  • Large ball bearing distances reduce uneven wear and minimize vibration on the encoder housing, which increases the encoder's service life
  • The nickel code disk offers a high degree of vibration resistance and an extended temperature range
  • Shorter development times through standardized mechanical interface
  • Platform for the future, since all electrical interfaces (TTL/HTL, 1Vpp, SSI, PROFIBUS, HIPERFACE DSL®) are or will be available in this mechanical component.
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 1 (Singleturn)
    Total number of steps: 32,768
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Error limits for the digital absolute value: ± 90 angular seconds (via RS485)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    without mechanical tension of the stator coupling
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 1,792 Byte (EEPROM 2048)
    Mechanical data
    Диаметр вала: 3/8 "
    Shaft plug-in length: 15 mm ... 42 mm
    Тип фланца/муфты статора: Version 2
    Dimensions: See dimensional drawing
    Масса: 0.2 kg
    Moment of inertia of the rotor: 40 gcm²
    Maximum operating speed: 9,000 /min 1)
    Maximum angular acceleration: 50,000 rad/s²
    Момент вращения: 0.6 Ncm (20 °C)
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Допустимое перемещение вала, радиальное статические: ± 0.3 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.1 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.5 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Connector M23, 12-pin, radial
    Shaft version: Blind hollow shaft
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... 115 °C
    Storage temperature range: -40 °C ... 115 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
    EMC: According to EN 61000-6-2 and EN 61000-6-3 1)
    Enclosure rating: IP 65, according to IEC 60529, with mating connector inserted
     
    Арт. -*

    * When ordering for the first time, please use the information in "Model Name" instead of "Part No."

    At a glance

  • HIPERFACE® motor feedback system in singleturn and multiturn design, compatible with the world's leading drive systems
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Mechanical flexibility through different blind hollow shaft and through hollow shaft diameters (8 to 15 mm diameter), available with various torque supports
  • Unique ball bearing design, allowing for a ball bearing distance of 30 mm.
  • Universal cable outlet and common connector versions
  • Protection class IP 65

    Your benefits

  • Convenient traceability and simple maintenance thanks to storage of motor-specific data in the electronic type label
  • Large ball bearing distances reduce uneven wear and minimize vibration on the encoder housing, which increases the encoder's service life
  • The nickel code disk offers a high degree of vibration resistance and an extended temperature range
  • Shorter development times through standardized mechanical interface
  • Platform for the future, since all electrical interfaces (TTL/HTL, 1Vpp, SSI, PROFIBUS, HIPERFACE DSL®) are or will be available in this mechanical component.
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 1 (Singleturn)
    Total number of steps: 32,768
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Error limits for the digital absolute value: ± 90 angular seconds (via RS485)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    without mechanical tension of the stator coupling
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 1,792 Byte (EEPROM 2048)
    Mechanical data
    Диаметр вала: 3/8 "
    Shaft plug-in length: 15 mm ... 42 mm
    Тип фланца/муфты статора: Version 3
    Dimensions: See dimensional drawing
    Масса: 0.2 kg
    Moment of inertia of the rotor: 40 gcm²
    Maximum operating speed: 9,000 /min 1)
    Maximum angular acceleration: 50,000 rad/s²
    Момент вращения: 0.6 Ncm (20 °C)
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Допустимое перемещение вала, радиальное статические: ± 0.3 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.1 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.5 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Connector M23, 12-pin, radial
    Shaft version: Blind hollow shaft
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... 115 °C
    Storage temperature range: -40 °C ... 115 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
    EMC: According to EN 61000-6-2 and EN 61000-6-3 1)
    Enclosure rating: IP 65, according to IEC 60529, with mating connector inserted
     
    Арт. -*

    * When ordering for the first time, please use the information in "Model Name" instead of "Part No."

    At a glance

  • HIPERFACE® motor feedback system in singleturn and multiturn design, compatible with the world's leading drive systems
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Mechanical flexibility through different blind hollow shaft and through hollow shaft diameters (8 to 15 mm diameter), available with various torque supports
  • Unique ball bearing design, allowing for a ball bearing distance of 30 mm.
  • Universal cable outlet and common connector versions
  • Protection class IP 65

    Your benefits

  • Convenient traceability and simple maintenance thanks to storage of motor-specific data in the electronic type label
  • Large ball bearing distances reduce uneven wear and minimize vibration on the encoder housing, which increases the encoder's service life
  • The nickel code disk offers a high degree of vibration resistance and an extended temperature range
  • Shorter development times through standardized mechanical interface
  • Platform for the future, since all electrical interfaces (TTL/HTL, 1Vpp, SSI, PROFIBUS, HIPERFACE DSL®) are or will be available in this mechanical component.
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 1 (Singleturn)
    Total number of steps: 32,768
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Error limits for the digital absolute value: ± 90 angular seconds (via RS485)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    without mechanical tension of the stator coupling
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 1,792 Byte (EEPROM 2048)
    Mechanical data
    Диаметр вала: 3/8 "
    Shaft plug-in length: 15 mm ... 42 mm
    Тип фланца/муфты статора: Version 4
    Dimensions: See dimensional drawing
    Масса: 0.2 kg
    Moment of inertia of the rotor: 40 gcm²
    Maximum operating speed: 9,000 /min 1)
    Maximum angular acceleration: 50,000 rad/s²
    Момент вращения: 0.6 Ncm (20 °C)
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Допустимое перемещение вала, радиальное статические: ± 0.3 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.1 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.5 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Connector M23, 12-pin, radial
    Shaft version: Blind hollow shaft
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... 115 °C
    Storage temperature range: -40 °C ... 115 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
    EMC: According to EN 61000-6-2 and EN 61000-6-3 1)
    Enclosure rating: IP 65, according to IEC 60529, with mating connector inserted
     
    Арт. -*

    * When ordering for the first time, please use the information in "Model Name" instead of "Part No."

    At a glance

  • HIPERFACE® motor feedback system in singleturn and multiturn design, compatible with the world's leading drive systems
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Mechanical flexibility through different blind hollow shaft and through hollow shaft diameters (8 to 15 mm diameter), available with various torque supports
  • Unique ball bearing design, allowing for a ball bearing distance of 30 mm.
  • Universal cable outlet and common connector versions
  • Protection class IP 65

    Your benefits

  • Convenient traceability and simple maintenance thanks to storage of motor-specific data in the electronic type label
  • Large ball bearing distances reduce uneven wear and minimize vibration on the encoder housing, which increases the encoder's service life
  • The nickel code disk offers a high degree of vibration resistance and an extended temperature range
  • Shorter development times through standardized mechanical interface
  • Platform for the future, since all electrical interfaces (TTL/HTL, 1Vpp, SSI, PROFIBUS, HIPERFACE DSL®) are or will be available in this mechanical component.
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 1 (Singleturn)
    Total number of steps: 32,768
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Error limits for the digital absolute value: ± 90 angular seconds (via RS485)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    without mechanical tension of the stator coupling
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 1,792 Byte (EEPROM 2048)
    Mechanical data
    Диаметр вала: 3/8 "
    Shaft plug-in length: 15 mm
    Тип фланца/муфты статора: Standard version
    Dimensions: See dimensional drawing
    Масса: 0.2 kg
    Moment of inertia of the rotor: 40 gcm²
    Maximum operating speed: 9,000 /min 1)
    Maximum angular acceleration: 50,000 rad/s²
    Момент вращения: 0.6 Ncm (20 °C)
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Допустимое перемещение вала, радиальное статические: ± 0.3 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.1 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.5 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Connector M23, 12-pin, radial
    Shaft version: Through hollow shaft
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... 115 °C
    Storage temperature range: -40 °C ... 115 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
    EMC: According to EN 61000-6-2 and EN 61000-6-3 1)
    Enclosure rating: IP 65, according to IEC 60529, with mating connector inserted
     
    Арт. -*

    * When ordering for the first time, please use the information in "Model Name" instead of "Part No."

    At a glance

  • HIPERFACE® motor feedback system in singleturn and multiturn design, compatible with the world's leading drive systems
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Mechanical flexibility through different blind hollow shaft and through hollow shaft diameters (8 to 15 mm diameter), available with various torque supports
  • Unique ball bearing design, allowing for a ball bearing distance of 30 mm.
  • Universal cable outlet and common connector versions
  • Protection class IP 65

    Your benefits

  • Convenient traceability and simple maintenance thanks to storage of motor-specific data in the electronic type label
  • Large ball bearing distances reduce uneven wear and minimize vibration on the encoder housing, which increases the encoder's service life
  • The nickel code disk offers a high degree of vibration resistance and an extended temperature range
  • Shorter development times through standardized mechanical interface
  • Platform for the future, since all electrical interfaces (TTL/HTL, 1Vpp, SSI, PROFIBUS, HIPERFACE DSL®) are or will be available in this mechanical component.
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 1 (Singleturn)
    Total number of steps: 32,768
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Error limits for the digital absolute value: ± 90 angular seconds (via RS485)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    without mechanical tension of the stator coupling
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 1,792 Byte (EEPROM 2048)
    Mechanical data
    Диаметр вала: 3/8 "
    Shaft plug-in length: 15 mm
    Тип фланца/муфты статора: Version 1
    Dimensions: See dimensional drawing
    Масса: 0.2 kg
    Moment of inertia of the rotor: 40 gcm²
    Maximum operating speed: 9,000 /min 1)
    Maximum angular acceleration: 50,000 rad/s²
    Момент вращения: 0.6 Ncm (20 °C)
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Допустимое перемещение вала, радиальное статические: ± 0.3 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.1 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.5 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Connector M23, 12-pin, radial
    Shaft version: Through hollow shaft
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... 115 °C
    Storage temperature range: -40 °C ... 115 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
    EMC: According to EN 61000-6-2 and EN 61000-6-3 1)
    Enclosure rating: IP 65, according to IEC 60529, with mating connector inserted
     
    Арт. -*

    * When ordering for the first time, please use the information in "Model Name" instead of "Part No."

    At a glance

  • HIPERFACE® motor feedback system in singleturn and multiturn design, compatible with the world's leading drive systems
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Mechanical flexibility through different blind hollow shaft and through hollow shaft diameters (8 to 15 mm diameter), available with various torque supports
  • Unique ball bearing design, allowing for a ball bearing distance of 30 mm.
  • Universal cable outlet and common connector versions
  • Protection class IP 65

    Your benefits

  • Convenient traceability and simple maintenance thanks to storage of motor-specific data in the electronic type label
  • Large ball bearing distances reduce uneven wear and minimize vibration on the encoder housing, which increases the encoder's service life
  • The nickel code disk offers a high degree of vibration resistance and an extended temperature range
  • Shorter development times through standardized mechanical interface
  • Platform for the future, since all electrical interfaces (TTL/HTL, 1Vpp, SSI, PROFIBUS, HIPERFACE DSL®) are or will be available in this mechanical component.
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 1 (Singleturn)
    Total number of steps: 32,768
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Error limits for the digital absolute value: ± 90 angular seconds (via RS485)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    without mechanical tension of the stator coupling
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 1,792 Byte (EEPROM 2048)
    Mechanical data
    Диаметр вала: 3/8 "
    Shaft plug-in length: 15 mm
    Тип фланца/муфты статора: Version 2
    Dimensions: See dimensional drawing
    Масса: 0.2 kg
    Moment of inertia of the rotor: 40 gcm²
    Maximum operating speed: 9,000 /min 1)
    Maximum angular acceleration: 50,000 rad/s²
    Момент вращения: 0.6 Ncm (20 °C)
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Допустимое перемещение вала, радиальное статические: ± 0.3 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.1 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.5 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Connector M23, 12-pin, radial
    Shaft version: Through hollow shaft
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... 115 °C
    Storage temperature range: -40 °C ... 115 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
    EMC: According to EN 61000-6-2 and EN 61000-6-3 1)
    Enclosure rating: IP 65, according to IEC 60529, with mating connector inserted
     
    Арт. -*

    * When ordering for the first time, please use the information in "Model Name" instead of "Part No."

    At a glance

  • HIPERFACE® motor feedback system in singleturn and multiturn design, compatible with the world's leading drive systems
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Mechanical flexibility through different blind hollow shaft and through hollow shaft diameters (8 to 15 mm diameter), available with various torque supports
  • Unique ball bearing design, allowing for a ball bearing distance of 30 mm.
  • Universal cable outlet and common connector versions
  • Protection class IP 65

    Your benefits

  • Convenient traceability and simple maintenance thanks to storage of motor-specific data in the electronic type label
  • Large ball bearing distances reduce uneven wear and minimize vibration on the encoder housing, which increases the encoder's service life
  • The nickel code disk offers a high degree of vibration resistance and an extended temperature range
  • Shorter development times through standardized mechanical interface
  • Platform for the future, since all electrical interfaces (TTL/HTL, 1Vpp, SSI, PROFIBUS, HIPERFACE DSL®) are or will be available in this mechanical component.
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 1 (Singleturn)
    Total number of steps: 32,768
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Error limits for the digital absolute value: ± 90 angular seconds (via RS485)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    without mechanical tension of the stator coupling
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 1,792 Byte (EEPROM 2048)
    Mechanical data
    Диаметр вала: 3/8 "
    Shaft plug-in length: 15 mm
    Тип фланца/муфты статора: Version 3
    Dimensions: See dimensional drawing
    Масса: 0.2 kg
    Moment of inertia of the rotor: 40 gcm²
    Maximum operating speed: 9,000 /min 1)
    Maximum angular acceleration: 50,000 rad/s²
    Момент вращения: 0.6 Ncm (20 °C)
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Допустимое перемещение вала, радиальное статические: ± 0.3 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.1 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.5 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Connector M23, 12-pin, radial
    Shaft version: Through hollow shaft
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... 115 °C
    Storage temperature range: -40 °C ... 115 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
    EMC: According to EN 61000-6-2 and EN 61000-6-3 1)
    Enclosure rating: IP 65, according to IEC 60529, with mating connector inserted
     
    Арт. -*

    * When ordering for the first time, please use the information in "Model Name" instead of "Part No."

    At a glance

  • HIPERFACE® motor feedback system in singleturn and multiturn design, compatible with the world's leading drive systems
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Mechanical flexibility through different blind hollow shaft and through hollow shaft diameters (8 to 15 mm diameter), available with various torque supports
  • Unique ball bearing design, allowing for a ball bearing distance of 30 mm.
  • Universal cable outlet and common connector versions
  • Protection class IP 65

    Your benefits

  • Convenient traceability and simple maintenance thanks to storage of motor-specific data in the electronic type label
  • Large ball bearing distances reduce uneven wear and minimize vibration on the encoder housing, which increases the encoder's service life
  • The nickel code disk offers a high degree of vibration resistance and an extended temperature range
  • Shorter development times through standardized mechanical interface
  • Platform for the future, since all electrical interfaces (TTL/HTL, 1Vpp, SSI, PROFIBUS, HIPERFACE DSL®) are or will be available in this mechanical component.
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 1 (Singleturn)
    Total number of steps: 32,768
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Error limits for the digital absolute value: ± 90 angular seconds (via RS485)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    without mechanical tension of the stator coupling
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 1,792 Byte (EEPROM 2048)
    Mechanical data
    Диаметр вала: 3/8 "
    Shaft plug-in length: 15 mm
    Тип фланца/муфты статора: Version 4
    Dimensions: See dimensional drawing
    Масса: 0.2 kg
    Moment of inertia of the rotor: 40 gcm²
    Maximum operating speed: 9,000 /min 1)
    Maximum angular acceleration: 50,000 rad/s²
    Момент вращения: 0.6 Ncm (20 °C)
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Допустимое перемещение вала, радиальное статические: ± 0.3 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.1 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.5 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Connector M23, 12-pin, radial
    Shaft version: Through hollow shaft
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... 115 °C
    Storage temperature range: -40 °C ... 115 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
    EMC: According to EN 61000-6-2 and EN 61000-6-3 1)
    Enclosure rating: IP 65, according to IEC 60529, with mating connector inserted
     
    Арт. -*

    * When ordering for the first time, please use the information in "Model Name" instead of "Part No."

    At a glance

  • HIPERFACE® motor feedback system in singleturn and multiturn design, compatible with the world's leading drive systems
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Mechanical flexibility through different blind hollow shaft and through hollow shaft diameters (8 to 15 mm diameter), available with various torque supports
  • Unique ball bearing design, allowing for a ball bearing distance of 30 mm.
  • Universal cable outlet and common connector versions
  • Protection class IP 65

    Your benefits

  • Convenient traceability and simple maintenance thanks to storage of motor-specific data in the electronic type label
  • Large ball bearing distances reduce uneven wear and minimize vibration on the encoder housing, which increases the encoder's service life
  • The nickel code disk offers a high degree of vibration resistance and an extended temperature range
  • Shorter development times through standardized mechanical interface
  • Platform for the future, since all electrical interfaces (TTL/HTL, 1Vpp, SSI, PROFIBUS, HIPERFACE DSL®) are or will be available in this mechanical component.
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 1 (Singleturn)
    Total number of steps: 32,768
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Error limits for the digital absolute value: ± 90 angular seconds (via RS485)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    without mechanical tension of the stator coupling
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 1,792 Byte (EEPROM 2048)
    Mechanical data
    Диаметр вала: 3/8 "
    Shaft plug-in length: 15 mm ... 42 mm
    Тип фланца/муфты статора: Standard version
    Dimensions: See dimensional drawing
    Масса: 0.2 kg
    Moment of inertia of the rotor: 40 gcm²
    Maximum operating speed: 9,000 /min 1)
    Maximum angular acceleration: 50,000 rad/s²
    Момент вращения: 0.6 Ncm (20 °C)
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Допустимое перемещение вала, радиальное статические: ± 0.3 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.1 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.5 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Male connector M12, 8-pin, radial
    Shaft version: Blind hollow shaft
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... 115 °C
    Storage temperature range: -40 °C ... 115 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
    EMC: According to EN 61000-6-2 and EN 61000-6-3 1)
    Enclosure rating: IP 65, according to IEC 60529, with mating connector inserted
     
    Арт. -*

    * When ordering for the first time, please use the information in "Model Name" instead of "Part No."

    At a glance

  • HIPERFACE® motor feedback system in singleturn and multiturn design, compatible with the world's leading drive systems
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Mechanical flexibility through different blind hollow shaft and through hollow shaft diameters (8 to 15 mm diameter), available with various torque supports
  • Unique ball bearing design, allowing for a ball bearing distance of 30 mm.
  • Universal cable outlet and common connector versions
  • Protection class IP 65

    Your benefits

  • Convenient traceability and simple maintenance thanks to storage of motor-specific data in the electronic type label
  • Large ball bearing distances reduce uneven wear and minimize vibration on the encoder housing, which increases the encoder's service life
  • The nickel code disk offers a high degree of vibration resistance and an extended temperature range
  • Shorter development times through standardized mechanical interface
  • Platform for the future, since all electrical interfaces (TTL/HTL, 1Vpp, SSI, PROFIBUS, HIPERFACE DSL®) are or will be available in this mechanical component.
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 1 (Singleturn)
    Total number of steps: 32,768
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Error limits for the digital absolute value: ± 90 angular seconds (via RS485)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    without mechanical tension of the stator coupling
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 1,792 Byte (EEPROM 2048)
    Mechanical data
    Диаметр вала: 3/8 "
    Shaft plug-in length: 15 mm ... 42 mm
    Тип фланца/муфты статора: Version 1
    Dimensions: See dimensional drawing
    Масса: 0.2 kg
    Moment of inertia of the rotor: 40 gcm²
    Maximum operating speed: 9,000 /min 1)
    Maximum angular acceleration: 50,000 rad/s²
    Момент вращения: 0.6 Ncm (20 °C)
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Допустимое перемещение вала, радиальное статические: ± 0.3 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.1 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.5 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Male connector M12, 8-pin, radial
    Shaft version: Blind hollow shaft
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... 115 °C
    Storage temperature range: -40 °C ... 115 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
    EMC: According to EN 61000-6-2 and EN 61000-6-3 1)
    Enclosure rating: IP 65, according to IEC 60529, with mating connector inserted
     
    Арт. -*

    * When ordering for the first time, please use the information in "Model Name" instead of "Part No."

    At a glance

  • HIPERFACE® motor feedback system in singleturn and multiturn design, compatible with the world's leading drive systems
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Mechanical flexibility through different blind hollow shaft and through hollow shaft diameters (8 to 15 mm diameter), available with various torque supports
  • Unique ball bearing design, allowing for a ball bearing distance of 30 mm.
  • Universal cable outlet and common connector versions
  • Protection class IP 65

    Your benefits

  • Convenient traceability and simple maintenance thanks to storage of motor-specific data in the electronic type label
  • Large ball bearing distances reduce uneven wear and minimize vibration on the encoder housing, which increases the encoder's service life
  • The nickel code disk offers a high degree of vibration resistance and an extended temperature range
  • Shorter development times through standardized mechanical interface
  • Platform for the future, since all electrical interfaces (TTL/HTL, 1Vpp, SSI, PROFIBUS, HIPERFACE DSL®) are or will be available in this mechanical component.
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 1 (Singleturn)
    Total number of steps: 32,768
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Error limits for the digital absolute value: ± 90 angular seconds (via RS485)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    without mechanical tension of the stator coupling
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 1,792 Byte (EEPROM 2048)
    Mechanical data
    Диаметр вала: 3/8 "
    Shaft plug-in length: 15 mm ... 42 mm
    Тип фланца/муфты статора: Version 2
    Dimensions: See dimensional drawing
    Масса: 0.2 kg
    Moment of inertia of the rotor: 40 gcm²
    Maximum operating speed: 9,000 /min 1)
    Maximum angular acceleration: 50,000 rad/s²
    Момент вращения: 0.6 Ncm (20 °C)
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Допустимое перемещение вала, радиальное статические: ± 0.3 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.1 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.5 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Male connector M12, 8-pin, radial
    Shaft version: Blind hollow shaft
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... 115 °C
    Storage temperature range: -40 °C ... 115 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
    EMC: According to EN 61000-6-2 and EN 61000-6-3 1)
    Enclosure rating: IP 65, according to IEC 60529, with mating connector inserted
     
    Арт. -*

    * When ordering for the first time, please use the information in "Model Name" instead of "Part No."

    At a glance

  • HIPERFACE® motor feedback system in singleturn and multiturn design, compatible with the world's leading drive systems
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Mechanical flexibility through different blind hollow shaft and through hollow shaft diameters (8 to 15 mm diameter), available with various torque supports
  • Unique ball bearing design, allowing for a ball bearing distance of 30 mm.
  • Universal cable outlet and common connector versions
  • Protection class IP 65

    Your benefits

  • Convenient traceability and simple maintenance thanks to storage of motor-specific data in the electronic type label
  • Large ball bearing distances reduce uneven wear and minimize vibration on the encoder housing, which increases the encoder's service life
  • The nickel code disk offers a high degree of vibration resistance and an extended temperature range
  • Shorter development times through standardized mechanical interface
  • Platform for the future, since all electrical interfaces (TTL/HTL, 1Vpp, SSI, PROFIBUS, HIPERFACE DSL®) are or will be available in this mechanical component.
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 1 (Singleturn)
    Total number of steps: 32,768
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Error limits for the digital absolute value: ± 90 angular seconds (via RS485)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    without mechanical tension of the stator coupling
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 1,792 Byte (EEPROM 2048)
    Mechanical data
    Диаметр вала: 3/8 "
    Shaft plug-in length: 15 mm ... 42 mm
    Тип фланца/муфты статора: Version 3
    Dimensions: See dimensional drawing
    Масса: 0.2 kg
    Moment of inertia of the rotor: 40 gcm²
    Maximum operating speed: 9,000 /min 1)
    Maximum angular acceleration: 50,000 rad/s²
    Момент вращения: 0.6 Ncm (20 °C)
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Допустимое перемещение вала, радиальное статические: ± 0.3 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.1 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.5 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Male connector M12, 8-pin, radial
    Shaft version: Blind hollow shaft
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... 115 °C
    Storage temperature range: -40 °C ... 115 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
    EMC: According to EN 61000-6-2 and EN 61000-6-3 1)
    Enclosure rating: IP 65, according to IEC 60529, with mating connector inserted
     
    Арт. -*

    * When ordering for the first time, please use the information in "Model Name" instead of "Part No."

    At a glance

  • HIPERFACE® motor feedback system in singleturn and multiturn design, compatible with the world's leading drive systems
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Mechanical flexibility through different blind hollow shaft and through hollow shaft diameters (8 to 15 mm diameter), available with various torque supports
  • Unique ball bearing design, allowing for a ball bearing distance of 30 mm.
  • Universal cable outlet and common connector versions
  • Protection class IP 65

    Your benefits

  • Convenient traceability and simple maintenance thanks to storage of motor-specific data in the electronic type label
  • Large ball bearing distances reduce uneven wear and minimize vibration on the encoder housing, which increases the encoder's service life
  • The nickel code disk offers a high degree of vibration resistance and an extended temperature range
  • Shorter development times through standardized mechanical interface
  • Platform for the future, since all electrical interfaces (TTL/HTL, 1Vpp, SSI, PROFIBUS, HIPERFACE DSL®) are or will be available in this mechanical component.
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 1 (Singleturn)
    Total number of steps: 32,768
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Error limits for the digital absolute value: ± 90 angular seconds (via RS485)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    without mechanical tension of the stator coupling
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 1,792 Byte (EEPROM 2048)
    Mechanical data
    Диаметр вала: 3/8 "
    Shaft plug-in length: 15 mm ... 42 mm
    Тип фланца/муфты статора: Version 4
    Dimensions: See dimensional drawing
    Масса: 0.2 kg
    Moment of inertia of the rotor: 40 gcm²
    Maximum operating speed: 9,000 /min 1)
    Maximum angular acceleration: 50,000 rad/s²
    Момент вращения: 0.6 Ncm (20 °C)
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Допустимое перемещение вала, радиальное статические: ± 0.3 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.1 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.5 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Male connector M12, 8-pin, radial
    Shaft version: Blind hollow shaft
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... 115 °C
    Storage temperature range: -40 °C ... 115 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
    EMC: According to EN 61000-6-2 and EN 61000-6-3 1)
    Enclosure rating: IP 65, according to IEC 60529, with mating connector inserted
     
    Арт. -*

    * When ordering for the first time, please use the information in "Model Name" instead of "Part No."

    At a glance

  • HIPERFACE® motor feedback system in singleturn and multiturn design, compatible with the world's leading drive systems
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Mechanical flexibility through different blind hollow shaft and through hollow shaft diameters (8 to 15 mm diameter), available with various torque supports
  • Unique ball bearing design, allowing for a ball bearing distance of 30 mm.
  • Universal cable outlet and common connector versions
  • Protection class IP 65

    Your benefits

  • Convenient traceability and simple maintenance thanks to storage of motor-specific data in the electronic type label
  • Large ball bearing distances reduce uneven wear and minimize vibration on the encoder housing, which increases the encoder's service life
  • The nickel code disk offers a high degree of vibration resistance and an extended temperature range
  • Shorter development times through standardized mechanical interface
  • Platform for the future, since all electrical interfaces (TTL/HTL, 1Vpp, SSI, PROFIBUS, HIPERFACE DSL®) are or will be available in this mechanical component.
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 1 (Singleturn)
    Total number of steps: 32,768
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Error limits for the digital absolute value: ± 90 angular seconds (via RS485)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    without mechanical tension of the stator coupling
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 1,792 Byte (EEPROM 2048)
    Mechanical data
    Диаметр вала: 3/8 "
    Shaft plug-in length: 15 mm ... 42 mm
    Тип фланца/муфты статора: Standard version
    Dimensions: See dimensional drawing
    Масса: 0.2 kg
    Moment of inertia of the rotor: 40 gcm²
    Maximum operating speed: 9,000 /min 1)
    Maximum angular acceleration: 50,000 rad/s²
    Момент вращения: 0.6 Ncm (20 °C)
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Допустимое перемещение вала, радиальное статические: ± 0.3 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.1 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.5 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Cable, 8-pin, radial, 1.5 m
    Shaft version: Blind hollow shaft
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... 115 °C
    Storage temperature range: -40 °C ... 115 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
    EMC: According to EN 61000-6-2 and EN 61000-6-3 1)
    Enclosure rating: IP 65, according to IEC 60529, with mating connector inserted
     
    Арт. -*

    * When ordering for the first time, please use the information in "Model Name" instead of "Part No."

    At a glance

  • HIPERFACE® motor feedback system in singleturn and multiturn design, compatible with the world's leading drive systems
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Mechanical flexibility through different blind hollow shaft and through hollow shaft diameters (8 to 15 mm diameter), available with various torque supports
  • Unique ball bearing design, allowing for a ball bearing distance of 30 mm.
  • Universal cable outlet and common connector versions
  • Protection class IP 65

    Your benefits

  • Convenient traceability and simple maintenance thanks to storage of motor-specific data in the electronic type label
  • Large ball bearing distances reduce uneven wear and minimize vibration on the encoder housing, which increases the encoder's service life
  • The nickel code disk offers a high degree of vibration resistance and an extended temperature range
  • Shorter development times through standardized mechanical interface
  • Platform for the future, since all electrical interfaces (TTL/HTL, 1Vpp, SSI, PROFIBUS, HIPERFACE DSL®) are or will be available in this mechanical component.
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 1 (Singleturn)
    Total number of steps: 32,768
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Error limits for the digital absolute value: ± 90 angular seconds (via RS485)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    without mechanical tension of the stator coupling
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 1,792 Byte (EEPROM 2048)
    Mechanical data
    Диаметр вала: 3/8 "
    Shaft plug-in length: 15 mm ... 42 mm
    Тип фланца/муфты статора: Version 1
    Dimensions: See dimensional drawing
    Масса: 0.2 kg
    Moment of inertia of the rotor: 40 gcm²
    Maximum operating speed: 9,000 /min 1)
    Maximum angular acceleration: 50,000 rad/s²
    Момент вращения: 0.6 Ncm (20 °C)
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Допустимое перемещение вала, радиальное статические: ± 0.3 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.1 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.5 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Cable, 8-pin, radial, 1.5 m
    Shaft version: Blind hollow shaft
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... 115 °C
    Storage temperature range: -40 °C ... 115 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
    EMC: According to EN 61000-6-2 and EN 61000-6-3 1)
    Enclosure rating: IP 65, according to IEC 60529, with mating connector inserted
     
    Арт. -*

    * When ordering for the first time, please use the information in "Model Name" instead of "Part No."

    At a glance

  • HIPERFACE® motor feedback system in singleturn and multiturn design, compatible with the world's leading drive systems
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Mechanical flexibility through different blind hollow shaft and through hollow shaft diameters (8 to 15 mm diameter), available with various torque supports
  • Unique ball bearing design, allowing for a ball bearing distance of 30 mm.
  • Universal cable outlet and common connector versions
  • Protection class IP 65

    Your benefits

  • Convenient traceability and simple maintenance thanks to storage of motor-specific data in the electronic type label
  • Large ball bearing distances reduce uneven wear and minimize vibration on the encoder housing, which increases the encoder's service life
  • The nickel code disk offers a high degree of vibration resistance and an extended temperature range
  • Shorter development times through standardized mechanical interface
  • Platform for the future, since all electrical interfaces (TTL/HTL, 1Vpp, SSI, PROFIBUS, HIPERFACE DSL®) are or will be available in this mechanical component.
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 1 (Singleturn)
    Total number of steps: 32,768
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Error limits for the digital absolute value: ± 90 angular seconds (via RS485)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    without mechanical tension of the stator coupling
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 1,792 Byte (EEPROM 2048)
    Mechanical data
    Диаметр вала: 3/8 "
    Shaft plug-in length: 15 mm ... 42 mm
    Тип фланца/муфты статора: Version 2
    Dimensions: See dimensional drawing
    Масса: 0.2 kg
    Moment of inertia of the rotor: 40 gcm²
    Maximum operating speed: 9,000 /min 1)
    Maximum angular acceleration: 50,000 rad/s²
    Момент вращения: 0.6 Ncm (20 °C)
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Допустимое перемещение вала, радиальное статические: ± 0.3 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.1 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.5 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Cable, 8-pin, radial, 1.5 m
    Shaft version: Blind hollow shaft
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... 115 °C
    Storage temperature range: -40 °C ... 115 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
    EMC: According to EN 61000-6-2 and EN 61000-6-3 1)
    Enclosure rating: IP 65, according to IEC 60529, with mating connector inserted
     
    Арт. -*

    * When ordering for the first time, please use the information in "Model Name" instead of "Part No."

    At a glance

  • HIPERFACE® motor feedback system in singleturn and multiturn design, compatible with the world's leading drive systems
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Mechanical flexibility through different blind hollow shaft and through hollow shaft diameters (8 to 15 mm diameter), available with various torque supports
  • Unique ball bearing design, allowing for a ball bearing distance of 30 mm.
  • Universal cable outlet and common connector versions
  • Protection class IP 65

    Your benefits

  • Convenient traceability and simple maintenance thanks to storage of motor-specific data in the electronic type label
  • Large ball bearing distances reduce uneven wear and minimize vibration on the encoder housing, which increases the encoder's service life
  • The nickel code disk offers a high degree of vibration resistance and an extended temperature range
  • Shorter development times through standardized mechanical interface
  • Platform for the future, since all electrical interfaces (TTL/HTL, 1Vpp, SSI, PROFIBUS, HIPERFACE DSL®) are or will be available in this mechanical component.
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 1 (Singleturn)
    Total number of steps: 32,768
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Error limits for the digital absolute value: ± 90 angular seconds (via RS485)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    without mechanical tension of the stator coupling
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 1,792 Byte (EEPROM 2048)
    Mechanical data
    Диаметр вала: 3/8 "
    Shaft plug-in length: 15 mm ... 42 mm
    Тип фланца/муфты статора: Version 3
    Dimensions: See dimensional drawing
    Масса: 0.2 kg
    Moment of inertia of the rotor: 40 gcm²
    Maximum operating speed: 9,000 /min 1)
    Maximum angular acceleration: 50,000 rad/s²
    Момент вращения: 0.6 Ncm (20 °C)
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Допустимое перемещение вала, радиальное статические: ± 0.3 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.1 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.5 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Cable, 8-pin, radial, 1.5 m
    Shaft version: Blind hollow shaft
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... 115 °C
    Storage temperature range: -40 °C ... 115 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
    EMC: According to EN 61000-6-2 and EN 61000-6-3 1)
    Enclosure rating: IP 65, according to IEC 60529, with mating connector inserted
     
    Арт. -*

    * When ordering for the first time, please use the information in "Model Name" instead of "Part No."

    At a glance

  • HIPERFACE® motor feedback system in singleturn and multiturn design, compatible with the world's leading drive systems
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Mechanical flexibility through different blind hollow shaft and through hollow shaft diameters (8 to 15 mm diameter), available with various torque supports
  • Unique ball bearing design, allowing for a ball bearing distance of 30 mm.
  • Universal cable outlet and common connector versions
  • Protection class IP 65

    Your benefits

  • Convenient traceability and simple maintenance thanks to storage of motor-specific data in the electronic type label
  • Large ball bearing distances reduce uneven wear and minimize vibration on the encoder housing, which increases the encoder's service life
  • The nickel code disk offers a high degree of vibration resistance and an extended temperature range
  • Shorter development times through standardized mechanical interface
  • Platform for the future, since all electrical interfaces (TTL/HTL, 1Vpp, SSI, PROFIBUS, HIPERFACE DSL®) are or will be available in this mechanical component.
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 1 (Singleturn)
    Total number of steps: 32,768
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Error limits for the digital absolute value: ± 90 angular seconds (via RS485)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    without mechanical tension of the stator coupling
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 1,792 Byte (EEPROM 2048)
    Mechanical data
    Диаметр вала: 3/8 "
    Shaft plug-in length: 15 mm ... 42 mm
    Тип фланца/муфты статора: Version 4
    Dimensions: See dimensional drawing
    Масса: 0.2 kg
    Moment of inertia of the rotor: 40 gcm²
    Maximum operating speed: 9,000 /min 1)
    Maximum angular acceleration: 50,000 rad/s²
    Момент вращения: 0.6 Ncm (20 °C)
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Допустимое перемещение вала, радиальное статические: ± 0.3 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.1 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.5 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Cable, 8-pin, radial, 1.5 m
    Shaft version: Blind hollow shaft
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... 115 °C
    Storage temperature range: -40 °C ... 115 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
    EMC: According to EN 61000-6-2 and EN 61000-6-3 1)
    Enclosure rating: IP 65, according to IEC 60529, with mating connector inserted
     
    Арт. -*

    * When ordering for the first time, please use the information in "Model Name" instead of "Part No."

    At a glance

  • HIPERFACE® motor feedback system in singleturn and multiturn design, compatible with the world's leading drive systems
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Mechanical flexibility through different blind hollow shaft and through hollow shaft diameters (8 to 15 mm diameter), available with various torque supports
  • Unique ball bearing design, allowing for a ball bearing distance of 30 mm.
  • Universal cable outlet and common connector versions
  • Protection class IP 65

    Your benefits

  • Convenient traceability and simple maintenance thanks to storage of motor-specific data in the electronic type label
  • Large ball bearing distances reduce uneven wear and minimize vibration on the encoder housing, which increases the encoder's service life
  • The nickel code disk offers a high degree of vibration resistance and an extended temperature range
  • Shorter development times through standardized mechanical interface
  • Platform for the future, since all electrical interfaces (TTL/HTL, 1Vpp, SSI, PROFIBUS, HIPERFACE DSL®) are or will be available in this mechanical component.
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 1 (Singleturn)
    Total number of steps: 32,768
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Error limits for the digital absolute value: ± 90 angular seconds (via RS485)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    without mechanical tension of the stator coupling
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 1,792 Byte (EEPROM 2048)
    Mechanical data
    Диаметр вала: 8 mm
    Shaft plug-in length: 15 mm ... 42 mm
    Тип фланца/муфты статора: Standard version
    Dimensions: See dimensional drawing
    Масса: 0.2 kg
    Moment of inertia of the rotor: 40 gcm²
    Maximum operating speed: 9,000 /min 1)
    Maximum angular acceleration: 50,000 rad/s²
    Момент вращения: 0.6 Ncm (20 °C)
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Допустимое перемещение вала, радиальное статические: ± 0.3 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.1 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.5 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Connector M23, 12-pin, radial
    Shaft version: Blind hollow shaft
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... 115 °C
    Storage temperature range: -40 °C ... 115 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
    EMC: According to EN 61000-6-2 and EN 61000-6-3 1)
    Enclosure rating: IP 65, according to IEC 60529, with mating connector inserted
     
    Арт. -*

    * When ordering for the first time, please use the information in "Model Name" instead of "Part No."

    At a glance

  • HIPERFACE® motor feedback system in singleturn and multiturn design, compatible with the world's leading drive systems
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Mechanical flexibility through different blind hollow shaft and through hollow shaft diameters (8 to 15 mm diameter), available with various torque supports
  • Unique ball bearing design, allowing for a ball bearing distance of 30 mm.
  • Universal cable outlet and common connector versions
  • Protection class IP 65

    Your benefits

  • Convenient traceability and simple maintenance thanks to storage of motor-specific data in the electronic type label
  • Large ball bearing distances reduce uneven wear and minimize vibration on the encoder housing, which increases the encoder's service life
  • The nickel code disk offers a high degree of vibration resistance and an extended temperature range
  • Shorter development times through standardized mechanical interface
  • Platform for the future, since all electrical interfaces (TTL/HTL, 1Vpp, SSI, PROFIBUS, HIPERFACE DSL®) are or will be available in this mechanical component.
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 1 (Singleturn)
    Total number of steps: 32,768
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Error limits for the digital absolute value: ± 90 angular seconds (via RS485)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    without mechanical tension of the stator coupling
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 1,792 Byte (EEPROM 2048)
    Mechanical data
    Диаметр вала: 8 mm
    Shaft plug-in length: 15 mm ... 42 mm
    Тип фланца/муфты статора: Version 1
    Dimensions: See dimensional drawing
    Масса: 0.2 kg
    Moment of inertia of the rotor: 40 gcm²
    Maximum operating speed: 9,000 /min 1)
    Maximum angular acceleration: 50,000 rad/s²
    Момент вращения: 0.6 Ncm (20 °C)
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Допустимое перемещение вала, радиальное статические: ± 0.3 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.1 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.5 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Connector M23, 12-pin, radial
    Shaft version: Blind hollow shaft
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... 115 °C
    Storage temperature range: -40 °C ... 115 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
    EMC: According to EN 61000-6-2 and EN 61000-6-3 1)
    Enclosure rating: IP 65, according to IEC 60529, with mating connector inserted
     
    Арт. -*

    * When ordering for the first time, please use the information in "Model Name" instead of "Part No."

    At a glance

  • HIPERFACE® motor feedback system in singleturn and multiturn design, compatible with the world's leading drive systems
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Mechanical flexibility through different blind hollow shaft and through hollow shaft diameters (8 to 15 mm diameter), available with various torque supports
  • Unique ball bearing design, allowing for a ball bearing distance of 30 mm.
  • Universal cable outlet and common connector versions
  • Protection class IP 65

    Your benefits

  • Convenient traceability and simple maintenance thanks to storage of motor-specific data in the electronic type label
  • Large ball bearing distances reduce uneven wear and minimize vibration on the encoder housing, which increases the encoder's service life
  • The nickel code disk offers a high degree of vibration resistance and an extended temperature range
  • Shorter development times through standardized mechanical interface
  • Platform for the future, since all electrical interfaces (TTL/HTL, 1Vpp, SSI, PROFIBUS, HIPERFACE DSL®) are or will be available in this mechanical component.
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 1 (Singleturn)
    Total number of steps: 32,768
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Error limits for the digital absolute value: ± 90 angular seconds (via RS485)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    without mechanical tension of the stator coupling
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 1,792 Byte (EEPROM 2048)
    Mechanical data
    Диаметр вала: 8 mm
    Shaft plug-in length: 15 mm ... 42 mm
    Тип фланца/муфты статора: Version 2
    Dimensions: See dimensional drawing
    Масса: 0.2 kg
    Moment of inertia of the rotor: 40 gcm²
    Maximum operating speed: 9,000 /min 1)
    Maximum angular acceleration: 50,000 rad/s²
    Момент вращения: 0.6 Ncm (20 °C)
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Допустимое перемещение вала, радиальное статические: ± 0.3 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.1 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.5 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Connector M23, 12-pin, radial
    Shaft version: Blind hollow shaft
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... 115 °C
    Storage temperature range: -40 °C ... 115 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
    EMC: According to EN 61000-6-2 and EN 61000-6-3 1)
    Enclosure rating: IP 65, according to IEC 60529, with mating connector inserted
     
    Арт. -*

    * When ordering for the first time, please use the information in "Model Name" instead of "Part No."

    At a glance

  • HIPERFACE® motor feedback system in singleturn and multiturn design, compatible with the world's leading drive systems
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Mechanical flexibility through different blind hollow shaft and through hollow shaft diameters (8 to 15 mm diameter), available with various torque supports
  • Unique ball bearing design, allowing for a ball bearing distance of 30 mm.
  • Universal cable outlet and common connector versions
  • Protection class IP 65

    Your benefits

  • Convenient traceability and simple maintenance thanks to storage of motor-specific data in the electronic type label
  • Large ball bearing distances reduce uneven wear and minimize vibration on the encoder housing, which increases the encoder's service life
  • The nickel code disk offers a high degree of vibration resistance and an extended temperature range
  • Shorter development times through standardized mechanical interface
  • Platform for the future, since all electrical interfaces (TTL/HTL, 1Vpp, SSI, PROFIBUS, HIPERFACE DSL®) are or will be available in this mechanical component.
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 1 (Singleturn)
    Total number of steps: 32,768
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Error limits for the digital absolute value: ± 90 angular seconds (via RS485)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    without mechanical tension of the stator coupling
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 1,792 Byte (EEPROM 2048)
    Mechanical data
    Диаметр вала: 8 mm
    Shaft plug-in length: 15 mm ... 42 mm
    Тип фланца/муфты статора: Version 3
    Dimensions: See dimensional drawing
    Масса: 0.2 kg
    Moment of inertia of the rotor: 40 gcm²
    Maximum operating speed: 9,000 /min 1)
    Maximum angular acceleration: 50,000 rad/s²
    Момент вращения: 0.6 Ncm (20 °C)
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Допустимое перемещение вала, радиальное статические: ± 0.3 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.1 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.5 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Connector M23, 12-pin, radial
    Shaft version: Blind hollow shaft
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... 115 °C
    Storage temperature range: -40 °C ... 115 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
    EMC: According to EN 61000-6-2 and EN 61000-6-3 1)
    Enclosure rating: IP 65, according to IEC 60529, with mating connector inserted
     
    Арт. -*

    * When ordering for the first time, please use the information in "Model Name" instead of "Part No."

    At a glance

  • HIPERFACE® motor feedback system in singleturn and multiturn design, compatible with the world's leading drive systems
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Mechanical flexibility through different blind hollow shaft and through hollow shaft diameters (8 to 15 mm diameter), available with various torque supports
  • Unique ball bearing design, allowing for a ball bearing distance of 30 mm.
  • Universal cable outlet and common connector versions
  • Protection class IP 65

    Your benefits

  • Convenient traceability and simple maintenance thanks to storage of motor-specific data in the electronic type label
  • Large ball bearing distances reduce uneven wear and minimize vibration on the encoder housing, which increases the encoder's service life
  • The nickel code disk offers a high degree of vibration resistance and an extended temperature range
  • Shorter development times through standardized mechanical interface
  • Platform for the future, since all electrical interfaces (TTL/HTL, 1Vpp, SSI, PROFIBUS, HIPERFACE DSL®) are or will be available in this mechanical component.
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 1 (Singleturn)
    Total number of steps: 32,768
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Error limits for the digital absolute value: ± 90 angular seconds (via RS485)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    without mechanical tension of the stator coupling
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 1,792 Byte (EEPROM 2048)
    Mechanical data
    Диаметр вала: 8 mm
    Shaft plug-in length: 15 mm ... 42 mm
    Тип фланца/муфты статора: Version 4
    Dimensions: See dimensional drawing
    Масса: 0.2 kg
    Moment of inertia of the rotor: 40 gcm²
    Maximum operating speed: 9,000 /min 1)
    Maximum angular acceleration: 50,000 rad/s²
    Момент вращения: 0.6 Ncm (20 °C)
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Допустимое перемещение вала, радиальное статические: ± 0.3 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.1 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.5 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Connector M23, 12-pin, radial
    Shaft version: Blind hollow shaft
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... 115 °C
    Storage temperature range: -40 °C ... 115 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
    EMC: According to EN 61000-6-2 and EN 61000-6-3 1)
    Enclosure rating: IP 65, according to IEC 60529, with mating connector inserted
     
    Арт. -*

    * When ordering for the first time, please use the information in "Model Name" instead of "Part No."

    At a glance

  • HIPERFACE® motor feedback system in singleturn and multiturn design, compatible with the world's leading drive systems
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Mechanical flexibility through different blind hollow shaft and through hollow shaft diameters (8 to 15 mm diameter), available with various torque supports
  • Unique ball bearing design, allowing for a ball bearing distance of 30 mm.
  • Universal cable outlet and common connector versions
  • Protection class IP 65

    Your benefits

  • Convenient traceability and simple maintenance thanks to storage of motor-specific data in the electronic type label
  • Large ball bearing distances reduce uneven wear and minimize vibration on the encoder housing, which increases the encoder's service life
  • The nickel code disk offers a high degree of vibration resistance and an extended temperature range
  • Shorter development times through standardized mechanical interface
  • Platform for the future, since all electrical interfaces (TTL/HTL, 1Vpp, SSI, PROFIBUS, HIPERFACE DSL®) are or will be available in this mechanical component.
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 1 (Singleturn)
    Total number of steps: 32,768
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Error limits for the digital absolute value: ± 90 angular seconds (via RS485)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    without mechanical tension of the stator coupling
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 1,792 Byte (EEPROM 2048)
    Mechanical data
    Диаметр вала: 8 mm
    Shaft plug-in length: 15 mm
    Тип фланца/муфты статора: Standard version
    Dimensions: See dimensional drawing
    Масса: 0.2 kg
    Moment of inertia of the rotor: 40 gcm²
    Maximum operating speed: 9,000 /min 1)
    Maximum angular acceleration: 50,000 rad/s²
    Момент вращения: 0.6 Ncm (20 °C)
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Допустимое перемещение вала, радиальное статические: ± 0.3 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.1 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.5 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Connector M23, 12-pin, radial
    Shaft version: Through hollow shaft
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... 115 °C
    Storage temperature range: -40 °C ... 115 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
    EMC: According to EN 61000-6-2 and EN 61000-6-3 1)
    Enclosure rating: IP 65, according to IEC 60529, with mating connector inserted
     
    Арт. -*

    * When ordering for the first time, please use the information in "Model Name" instead of "Part No."

    At a glance

  • HIPERFACE® motor feedback system in singleturn and multiturn design, compatible with the world's leading drive systems
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Mechanical flexibility through different blind hollow shaft and through hollow shaft diameters (8 to 15 mm diameter), available with various torque supports
  • Unique ball bearing design, allowing for a ball bearing distance of 30 mm.
  • Universal cable outlet and common connector versions
  • Protection class IP 65

    Your benefits

  • Convenient traceability and simple maintenance thanks to storage of motor-specific data in the electronic type label
  • Large ball bearing distances reduce uneven wear and minimize vibration on the encoder housing, which increases the encoder's service life
  • The nickel code disk offers a high degree of vibration resistance and an extended temperature range
  • Shorter development times through standardized mechanical interface
  • Platform for the future, since all electrical interfaces (TTL/HTL, 1Vpp, SSI, PROFIBUS, HIPERFACE DSL®) are or will be available in this mechanical component.
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 1 (Singleturn)
    Total number of steps: 32,768
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Error limits for the digital absolute value: ± 90 angular seconds (via RS485)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    without mechanical tension of the stator coupling
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 1,792 Byte (EEPROM 2048)
    Mechanical data
    Диаметр вала: 8 mm
    Shaft plug-in length: 15 mm
    Тип фланца/муфты статора: Version 1
    Dimensions: See dimensional drawing
    Масса: 0.2 kg
    Moment of inertia of the rotor: 40 gcm²
    Maximum operating speed: 9,000 /min 1)
    Maximum angular acceleration: 50,000 rad/s²
    Момент вращения: 0.6 Ncm (20 °C)
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Допустимое перемещение вала, радиальное статические: ± 0.3 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.1 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.5 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Connector M23, 12-pin, radial
    Shaft version: Through hollow shaft
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... 115 °C
    Storage temperature range: -40 °C ... 115 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
    EMC: According to EN 61000-6-2 and EN 61000-6-3 1)
    Enclosure rating: IP 65, according to IEC 60529, with mating connector inserted
     
    Арт. -*

    * When ordering for the first time, please use the information in "Model Name" instead of "Part No."

    At a glance

  • HIPERFACE® motor feedback system in singleturn and multiturn design, compatible with the world's leading drive systems
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Mechanical flexibility through different blind hollow shaft and through hollow shaft diameters (8 to 15 mm diameter), available with various torque supports
  • Unique ball bearing design, allowing for a ball bearing distance of 30 mm.
  • Universal cable outlet and common connector versions
  • Protection class IP 65

    Your benefits

  • Convenient traceability and simple maintenance thanks to storage of motor-specific data in the electronic type label
  • Large ball bearing distances reduce uneven wear and minimize vibration on the encoder housing, which increases the encoder's service life
  • The nickel code disk offers a high degree of vibration resistance and an extended temperature range
  • Shorter development times through standardized mechanical interface
  • Platform for the future, since all electrical interfaces (TTL/HTL, 1Vpp, SSI, PROFIBUS, HIPERFACE DSL®) are or will be available in this mechanical component.
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 1 (Singleturn)
    Total number of steps: 32,768
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Error limits for the digital absolute value: ± 90 angular seconds (via RS485)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    without mechanical tension of the stator coupling
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 1,792 Byte (EEPROM 2048)
    Mechanical data
    Диаметр вала: 8 mm
    Shaft plug-in length: 15 mm
    Тип фланца/муфты статора: Version 2
    Dimensions: See dimensional drawing
    Масса: 0.2 kg
    Moment of inertia of the rotor: 40 gcm²
    Maximum operating speed: 9,000 /min 1)
    Maximum angular acceleration: 50,000 rad/s²
    Момент вращения: 0.6 Ncm (20 °C)
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Допустимое перемещение вала, радиальное статические: ± 0.3 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.1 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.5 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Connector M23, 12-pin, radial
    Shaft version: Through hollow shaft
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... 115 °C
    Storage temperature range: -40 °C ... 115 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
    EMC: According to EN 61000-6-2 and EN 61000-6-3 1)
    Enclosure rating: IP 65, according to IEC 60529, with mating connector inserted
     
    Арт. -*

    * When ordering for the first time, please use the information in "Model Name" instead of "Part No."

    At a glance

  • HIPERFACE® motor feedback system in singleturn and multiturn design, compatible with the world's leading drive systems
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Mechanical flexibility through different blind hollow shaft and through hollow shaft diameters (8 to 15 mm diameter), available with various torque supports
  • Unique ball bearing design, allowing for a ball bearing distance of 30 mm.
  • Universal cable outlet and common connector versions
  • Protection class IP 65

    Your benefits

  • Convenient traceability and simple maintenance thanks to storage of motor-specific data in the electronic type label
  • Large ball bearing distances reduce uneven wear and minimize vibration on the encoder housing, which increases the encoder's service life
  • The nickel code disk offers a high degree of vibration resistance and an extended temperature range
  • Shorter development times through standardized mechanical interface
  • Platform for the future, since all electrical interfaces (TTL/HTL, 1Vpp, SSI, PROFIBUS, HIPERFACE DSL®) are or will be available in this mechanical component.
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 1 (Singleturn)
    Total number of steps: 32,768
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Error limits for the digital absolute value: ± 90 angular seconds (via RS485)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    without mechanical tension of the stator coupling
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 1,792 Byte (EEPROM 2048)
    Mechanical data
    Диаметр вала: 8 mm
    Shaft plug-in length: 15 mm
    Тип фланца/муфты статора: Version 3
    Dimensions: See dimensional drawing
    Масса: 0.2 kg
    Moment of inertia of the rotor: 40 gcm²
    Maximum operating speed: 9,000 /min 1)
    Maximum angular acceleration: 50,000 rad/s²
    Момент вращения: 0.6 Ncm (20 °C)
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Допустимое перемещение вала, радиальное статические: ± 0.3 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.1 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.5 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Connector M23, 12-pin, radial
    Shaft version: Through hollow shaft
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... 115 °C
    Storage temperature range: -40 °C ... 115 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
    EMC: According to EN 61000-6-2 and EN 61000-6-3 1)
    Enclosure rating: IP 65, according to IEC 60529, with mating connector inserted
     
    Арт. -*

    * When ordering for the first time, please use the information in "Model Name" instead of "Part No."

    At a glance

  • HIPERFACE® motor feedback system in singleturn and multiturn design, compatible with the world's leading drive systems
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Mechanical flexibility through different blind hollow shaft and through hollow shaft diameters (8 to 15 mm diameter), available with various torque supports
  • Unique ball bearing design, allowing for a ball bearing distance of 30 mm.
  • Universal cable outlet and common connector versions
  • Protection class IP 65

    Your benefits

  • Convenient traceability and simple maintenance thanks to storage of motor-specific data in the electronic type label
  • Large ball bearing distances reduce uneven wear and minimize vibration on the encoder housing, which increases the encoder's service life
  • The nickel code disk offers a high degree of vibration resistance and an extended temperature range
  • Shorter development times through standardized mechanical interface
  • Platform for the future, since all electrical interfaces (TTL/HTL, 1Vpp, SSI, PROFIBUS, HIPERFACE DSL®) are or will be available in this mechanical component.
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 1 (Singleturn)
    Total number of steps: 32,768
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Error limits for the digital absolute value: ± 90 angular seconds (via RS485)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    without mechanical tension of the stator coupling
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 1,792 Byte (EEPROM 2048)
    Mechanical data
    Диаметр вала: 8 mm
    Shaft plug-in length: 15 mm
    Тип фланца/муфты статора: Version 4
    Dimensions: See dimensional drawing
    Масса: 0.2 kg
    Moment of inertia of the rotor: 40 gcm²
    Maximum operating speed: 9,000 /min 1)
    Maximum angular acceleration: 50,000 rad/s²
    Момент вращения: 0.6 Ncm (20 °C)
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Допустимое перемещение вала, радиальное статические: ± 0.3 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.1 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.5 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Connector M23, 12-pin, radial
    Shaft version: Through hollow shaft
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... 115 °C
    Storage temperature range: -40 °C ... 115 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
    EMC: According to EN 61000-6-2 and EN 61000-6-3 1)
    Enclosure rating: IP 65, according to IEC 60529, with mating connector inserted
     
    Арт. -*

    * When ordering for the first time, please use the information in "Model Name" instead of "Part No."

    At a glance

  • HIPERFACE® motor feedback system in singleturn and multiturn design, compatible with the world's leading drive systems
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Mechanical flexibility through different blind hollow shaft and through hollow shaft diameters (8 to 15 mm diameter), available with various torque supports
  • Unique ball bearing design, allowing for a ball bearing distance of 30 mm.
  • Universal cable outlet and common connector versions
  • Protection class IP 65

    Your benefits

  • Convenient traceability and simple maintenance thanks to storage of motor-specific data in the electronic type label
  • Large ball bearing distances reduce uneven wear and minimize vibration on the encoder housing, which increases the encoder's service life
  • The nickel code disk offers a high degree of vibration resistance and an extended temperature range
  • Shorter development times through standardized mechanical interface
  • Platform for the future, since all electrical interfaces (TTL/HTL, 1Vpp, SSI, PROFIBUS, HIPERFACE DSL®) are or will be available in this mechanical component.
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 1 (Singleturn)
    Total number of steps: 32,768
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Error limits for the digital absolute value: ± 90 angular seconds (via RS485)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    without mechanical tension of the stator coupling
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 1,792 Byte (EEPROM 2048)
    Mechanical data
    Диаметр вала: 8 mm
    Shaft plug-in length: 15 mm ... 42 mm
    Тип фланца/муфты статора: Standard version
    Dimensions: See dimensional drawing
    Масса: 0.2 kg
    Moment of inertia of the rotor: 40 gcm²
    Maximum operating speed: 9,000 /min 1)
    Maximum angular acceleration: 50,000 rad/s²
    Момент вращения: 0.6 Ncm (20 °C)
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Допустимое перемещение вала, радиальное статические: ± 0.3 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.1 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.5 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Male connector M12, 8-pin, radial
    Shaft version: Blind hollow shaft
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... 115 °C
    Storage temperature range: -40 °C ... 115 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
    EMC: According to EN 61000-6-2 and EN 61000-6-3 1)
    Enclosure rating: IP 65, according to IEC 60529, with mating connector inserted
     
    Арт. -*

    * When ordering for the first time, please use the information in "Model Name" instead of "Part No."

    At a glance

  • HIPERFACE® motor feedback system in singleturn and multiturn design, compatible with the world's leading drive systems
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Mechanical flexibility through different blind hollow shaft and through hollow shaft diameters (8 to 15 mm diameter), available with various torque supports
  • Unique ball bearing design, allowing for a ball bearing distance of 30 mm.
  • Universal cable outlet and common connector versions
  • Protection class IP 65

    Your benefits

  • Convenient traceability and simple maintenance thanks to storage of motor-specific data in the electronic type label
  • Large ball bearing distances reduce uneven wear and minimize vibration on the encoder housing, which increases the encoder's service life
  • The nickel code disk offers a high degree of vibration resistance and an extended temperature range
  • Shorter development times through standardized mechanical interface
  • Platform for the future, since all electrical interfaces (TTL/HTL, 1Vpp, SSI, PROFIBUS, HIPERFACE DSL®) are or will be available in this mechanical component.
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 1 (Singleturn)
    Total number of steps: 32,768
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Error limits for the digital absolute value: ± 90 angular seconds (via RS485)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    without mechanical tension of the stator coupling
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 1,792 Byte (EEPROM 2048)
    Mechanical data
    Диаметр вала: 8 mm
    Shaft plug-in length: 15 mm ... 42 mm
    Тип фланца/муфты статора: Version 1
    Dimensions: See dimensional drawing
    Масса: 0.2 kg
    Moment of inertia of the rotor: 40 gcm²
    Maximum operating speed: 9,000 /min 1)
    Maximum angular acceleration: 50,000 rad/s²
    Момент вращения: 0.6 Ncm (20 °C)
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Допустимое перемещение вала, радиальное статические: ± 0.3 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.1 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.5 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Male connector M12, 8-pin, radial
    Shaft version: Blind hollow shaft
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... 115 °C
    Storage temperature range: -40 °C ... 115 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
    EMC: According to EN 61000-6-2 and EN 61000-6-3 1)
    Enclosure rating: IP 65, according to IEC 60529, with mating connector inserted
     
    Арт. -*

    * When ordering for the first time, please use the information in "Model Name" instead of "Part No."

    At a glance

  • HIPERFACE® motor feedback system in singleturn and multiturn design, compatible with the world's leading drive systems
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Mechanical flexibility through different blind hollow shaft and through hollow shaft diameters (8 to 15 mm diameter), available with various torque supports
  • Unique ball bearing design, allowing for a ball bearing distance of 30 mm.
  • Universal cable outlet and common connector versions
  • Protection class IP 65

    Your benefits

  • Convenient traceability and simple maintenance thanks to storage of motor-specific data in the electronic type label
  • Large ball bearing distances reduce uneven wear and minimize vibration on the encoder housing, which increases the encoder's service life
  • The nickel code disk offers a high degree of vibration resistance and an extended temperature range
  • Shorter development times through standardized mechanical interface
  • Platform for the future, since all electrical interfaces (TTL/HTL, 1Vpp, SSI, PROFIBUS, HIPERFACE DSL®) are or will be available in this mechanical component.
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 1 (Singleturn)
    Total number of steps: 32,768
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Error limits for the digital absolute value: ± 90 angular seconds (via RS485)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    without mechanical tension of the stator coupling
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 1,792 Byte (EEPROM 2048)
    Mechanical data
    Диаметр вала: 8 mm
    Shaft plug-in length: 15 mm ... 42 mm
    Тип фланца/муфты статора: Version 2
    Dimensions: See dimensional drawing
    Масса: 0.2 kg
    Moment of inertia of the rotor: 40 gcm²
    Maximum operating speed: 9,000 /min 1)
    Maximum angular acceleration: 50,000 rad/s²
    Момент вращения: 0.6 Ncm (20 °C)
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Допустимое перемещение вала, радиальное статические: ± 0.3 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.1 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.5 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Male connector M12, 8-pin, radial
    Shaft version: Blind hollow shaft
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... 115 °C
    Storage temperature range: -40 °C ... 115 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
    EMC: According to EN 61000-6-2 and EN 61000-6-3 1)
    Enclosure rating: IP 65, according to IEC 60529, with mating connector inserted
     
    Арт. -*

    * When ordering for the first time, please use the information in "Model Name" instead of "Part No."

    At a glance

  • HIPERFACE® motor feedback system in singleturn and multiturn design, compatible with the world's leading drive systems
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Mechanical flexibility through different blind hollow shaft and through hollow shaft diameters (8 to 15 mm diameter), available with various torque supports
  • Unique ball bearing design, allowing for a ball bearing distance of 30 mm.
  • Universal cable outlet and common connector versions
  • Protection class IP 65

    Your benefits

  • Convenient traceability and simple maintenance thanks to storage of motor-specific data in the electronic type label
  • Large ball bearing distances reduce uneven wear and minimize vibration on the encoder housing, which increases the encoder's service life
  • The nickel code disk offers a high degree of vibration resistance and an extended temperature range
  • Shorter development times through standardized mechanical interface
  • Platform for the future, since all electrical interfaces (TTL/HTL, 1Vpp, SSI, PROFIBUS, HIPERFACE DSL®) are or will be available in this mechanical component.
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 1 (Singleturn)
    Total number of steps: 32,768
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Error limits for the digital absolute value: ± 90 angular seconds (via RS485)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    without mechanical tension of the stator coupling
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 1,792 Byte (EEPROM 2048)
    Mechanical data
    Диаметр вала: 8 mm
    Shaft plug-in length: 15 mm ... 42 mm
    Тип фланца/муфты статора: Version 3
    Dimensions: See dimensional drawing
    Масса: 0.2 kg
    Moment of inertia of the rotor: 40 gcm²
    Maximum operating speed: 9,000 /min 1)
    Maximum angular acceleration: 50,000 rad/s²
    Момент вращения: 0.6 Ncm (20 °C)
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Допустимое перемещение вала, радиальное статические: ± 0.3 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.1 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.5 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Male connector M12, 8-pin, radial
    Shaft version: Blind hollow shaft
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... 115 °C
    Storage temperature range: -40 °C ... 115 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
    EMC: According to EN 61000-6-2 and EN 61000-6-3 1)
    Enclosure rating: IP 65, according to IEC 60529, with mating connector inserted
     
    Арт. -*

    * When ordering for the first time, please use the information in "Model Name" instead of "Part No."

    At a glance

  • HIPERFACE® motor feedback system in singleturn and multiturn design, compatible with the world's leading drive systems
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Mechanical flexibility through different blind hollow shaft and through hollow shaft diameters (8 to 15 mm diameter), available with various torque supports
  • Unique ball bearing design, allowing for a ball bearing distance of 30 mm.
  • Universal cable outlet and common connector versions
  • Protection class IP 65

    Your benefits

  • Convenient traceability and simple maintenance thanks to storage of motor-specific data in the electronic type label
  • Large ball bearing distances reduce uneven wear and minimize vibration on the encoder housing, which increases the encoder's service life
  • The nickel code disk offers a high degree of vibration resistance and an extended temperature range
  • Shorter development times through standardized mechanical interface
  • Platform for the future, since all electrical interfaces (TTL/HTL, 1Vpp, SSI, PROFIBUS, HIPERFACE DSL®) are or will be available in this mechanical component.
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 1 (Singleturn)
    Total number of steps: 32,768
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Error limits for the digital absolute value: ± 90 angular seconds (via RS485)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    without mechanical tension of the stator coupling
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 1,792 Byte (EEPROM 2048)
    Mechanical data
    Диаметр вала: 8 mm
    Shaft plug-in length: 15 mm ... 42 mm
    Тип фланца/муфты статора: Version 4
    Dimensions: See dimensional drawing
    Масса: 0.2 kg
    Moment of inertia of the rotor: 40 gcm²
    Maximum operating speed: 9,000 /min 1)
    Maximum angular acceleration: 50,000 rad/s²
    Момент вращения: 0.6 Ncm (20 °C)
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Допустимое перемещение вала, радиальное статические: ± 0.3 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.1 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.5 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Male connector M12, 8-pin, radial
    Shaft version: Blind hollow shaft
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... 115 °C
    Storage temperature range: -40 °C ... 115 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
    EMC: According to EN 61000-6-2 and EN 61000-6-3 1)
    Enclosure rating: IP 65, according to IEC 60529, with mating connector inserted
     
    Арт. -*

    * When ordering for the first time, please use the information in "Model Name" instead of "Part No."

    At a glance

  • HIPERFACE® motor feedback system in singleturn and multiturn design, compatible with the world's leading drive systems
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Mechanical flexibility through different blind hollow shaft and through hollow shaft diameters (8 to 15 mm diameter), available with various torque supports
  • Unique ball bearing design, allowing for a ball bearing distance of 30 mm.
  • Universal cable outlet and common connector versions
  • Protection class IP 65

    Your benefits

  • Convenient traceability and simple maintenance thanks to storage of motor-specific data in the electronic type label
  • Large ball bearing distances reduce uneven wear and minimize vibration on the encoder housing, which increases the encoder's service life
  • The nickel code disk offers a high degree of vibration resistance and an extended temperature range
  • Shorter development times through standardized mechanical interface
  • Platform for the future, since all electrical interfaces (TTL/HTL, 1Vpp, SSI, PROFIBUS, HIPERFACE DSL®) are or will be available in this mechanical component.
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 1 (Singleturn)
    Total number of steps: 32,768
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Error limits for the digital absolute value: ± 90 angular seconds (via RS485)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    without mechanical tension of the stator coupling
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 1,792 Byte (EEPROM 2048)
    Mechanical data
    Диаметр вала: 8 mm
    Shaft plug-in length: 15 mm ... 42 mm
    Тип фланца/муфты статора: Standard version
    Dimensions: See dimensional drawing
    Масса: 0.2 kg
    Moment of inertia of the rotor: 40 gcm²
    Maximum operating speed: 9,000 /min 1)
    Maximum angular acceleration: 50,000 rad/s²
    Момент вращения: 0.6 Ncm (20 °C)
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Допустимое перемещение вала, радиальное статические: ± 0.3 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.1 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.5 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Cable, 8-pin, radial, 1.5 m
    Shaft version: Blind hollow shaft
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... 115 °C
    Storage temperature range: -40 °C ... 115 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
    EMC: According to EN 61000-6-2 and EN 61000-6-3 1)
    Enclosure rating: IP 65, according to IEC 60529, with mating connector inserted
     
    Арт. -*

    * When ordering for the first time, please use the information in "Model Name" instead of "Part No."

    At a glance

  • HIPERFACE® motor feedback system in singleturn and multiturn design, compatible with the world's leading drive systems
  • 1,024 sine/ cosine periods per revolution
  • Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
  • HIPERFACE® interface: Programming of the position value and electronic type label
  • Mechanical flexibility through different blind hollow shaft and through hollow shaft diameters (8 to 15 mm diameter), available with various torque supports
  • Unique ball bearing design, allowing for a ball bearing distance of 30 mm.
  • Universal cable outlet and common connector versions
  • Protection class IP 65

    Your benefits

  • Convenient traceability and simple maintenance thanks to storage of motor-specific data in the electronic type label
  • Large ball bearing distances reduce uneven wear and minimize vibration on the encoder housing, which increases the encoder's service life
  • The nickel code disk offers a high degree of vibration resistance and an extended temperature range
  • Shorter development times through standardized mechanical interface
  • Platform for the future, since all electrical interfaces (TTL/HTL, 1Vpp, SSI, PROFIBUS, HIPERFACE DSL®) are or will be available in this mechanical component.
    Performance
    Number of sine/cosine periods per revolution: 1,024
    Number of the absolute ascertainable revolutions: 1 (Singleturn)
    Total number of steps: 32,768
    Шаг измерения: 0.3 angular seconds at interpolation of the sine/cosine signals with e.g. 12 Bit
    Error limits for the digital absolute value: ± 90 angular seconds (via RS485)
    Integral non-linearity typ.: ± 45 angular seconds (Error limits for evaluating sine/cosine period)
    without mechanical tension of the stator coupling
    Differential non-linearity: ± 7 angular seconds (Non-linearity within a sine/cosine period)
    Operating speed: 6,000 /min, up to which the absolute position can be reliably produced
    Available memory area: 1,792 Byte (EEPROM 2048)
    Mechanical data
    Диаметр вала: 8 mm
    Shaft plug-in length: 15 mm ... 42 mm
    Тип фланца/муфты статора: Version 1
    Dimensions: See dimensional drawing
    Масса: 0.2 kg
    Moment of inertia of the rotor: 40 gcm²
    Maximum operating speed: 9,000 /min 1)
    Maximum angular acceleration: 50,000 rad/s²
    Момент вращения: 0.6 Ncm (20 °C)
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Допустимое перемещение вала, радиальное статические: ± 0.3 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.1 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.5 mm
    Permissible shaft movement, axial, dynamic: ± 0.2 mm
    Life of ball bearings: 3.6 x 10^9 revolutions
    Тип подключения: Cable, 8-pin, radial, 1.5 m
    Shaft version: Blind hollow shaft
    Electrical data
    Electrical interface: HIPERFACE
    Operating voltage range/supply Voltage: 7 V DC ... 12 V DC
    Recommended supply voltage: 8 V DC
    Output frequency for sine/cosine signals: 0 kHz ... 200 kHz
    Номинальная потребляемая мощность (без нагрузки): 1)
    Interfaces
    Type of code for the absolute value: Binary
    Кодовая последовательность: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
    Interface signals: Parameter channel RS 485: digital, Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
    Данные окуражающей среды
    Working temperature range: -30 °C ... 115 °C
    Storage temperature range: -40 °C ... 115 °C, without package
    Относительная влажность / конденсат: 90 %, Condensation not permitted
    Устойчивость к ударам: 100 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
    EMC: According to EN 61000-6-2 and EN 61000-6-3 1)
    Enclosure rating: IP 65, according to IEC 60529, with mating connector inserted
     
     


    Страницы:

     
     
     
    Имя Отчество:
     
    Адрес электронной почты:
     
    Контактный телефон:
     
    Наименование компании:
     
    Содержание заказа: