Звоните (Россия)
  +7 (812) 432-38-38
432-36-36
Звоните (Казахстан)
  +7 (701) 169-20-01
+7 (701) 169-20-01
 
График работы
пн-пт. 10:00 — 18:00
 
 

EKS/EKM36

 
 
Арт. 1054316

At a glance

  • Motor feedback system with HIPERFACE DSL® interface
  • Compact, robust design with 36 mm diameter
  • Up to 20 bit resolution per revolution and 4,096 revolutions measurable with the multiturn system
  • Facility for connecting an external temperature sensor
  • E²Prom with 8 kbyte of free memory space
  • SIL2-certified (only valid for EKS/EKM36-2...)
  • Service life histogram

    Your benefits

  • Saving all analog components on the controller part through exclusively digital data transmission
  • Enormous cost saving thanks to the separate encoder cable no longer being necessary, data transmitted synchronously to the controller cycle
  • Minimal cabling thanks to integration of the encoder communication into the motor cable
  • Optimization of the controller circuit via automatic synchronization with the controller cycle
    Performance
    Number of the absolute ascertainable revolutions: Multiturn
    Available memory area: 8,192 Byte 1)
    Mechanical data
    Тип фланца/муфты статора: Spring mounting plate, Ø 36
    Moment of inertia of the rotor: 4.5 gcm²
    Момент вращения: 0.2 Ncm
    Крутящий момент на старте: 0.3 Ncm
    Допустимое перемещение вала, радиальное статические: ± 0.1 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.05 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.5 mm
    Permissible shaft movement, axial, dynamic: ± 0.1 mm
    Maximum operating speed: 9,000 U/min
    Electrical data
    Electrical interface: HIPERFACE DSL
    Данные окуражающей среды
    Working temperature range: -20 °C ... 115 °C
    Storage temperature range: -40 °C ... 125 °C
    Относительная влажность / конденсат: Condensation not permitted
    Устойчивость к ударам: 100 g (IEC 60068-2-27)
    Resistance to vibration: 50 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
    Enclosure rating: IP 40
     
    Арт. 1054324

    At a glance

  • Motor feedback system with HIPERFACE DSL® interface
  • Compact, robust design with 36 mm diameter
  • Up to 20 bit resolution per revolution and 4,096 revolutions measurable with the multiturn system
  • Facility for connecting an external temperature sensor
  • E²Prom with 8 kbyte of free memory space
  • SIL2-certified (only valid for EKS/EKM36-2...)
  • Service life histogram

    Your benefits

  • Saving all analog components on the controller part through exclusively digital data transmission
  • Enormous cost saving thanks to the separate encoder cable no longer being necessary, data transmitted synchronously to the controller cycle
  • Minimal cabling thanks to integration of the encoder communication into the motor cable
  • Optimization of the controller circuit via automatic synchronization with the controller cycle
    Performance
    Number of the absolute ascertainable revolutions: Multiturn
    Available memory area: 8,192 Byte 1)
    Mechanical data
    Тип фланца/муфты статора: Spring mounting plate, Ø 36
    Moment of inertia of the rotor: 4.5 gcm²
    Момент вращения: 0.2 Ncm
    Крутящий момент на старте: 0.3 Ncm
    Допустимое перемещение вала, радиальное статические: ± 0.1 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.05 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.5 mm
    Permissible shaft movement, axial, dynamic: ± 0.1 mm
    Maximum operating speed: 9,000 U/min
    Electrical data
    Electrical interface: HIPERFACE DSL
    Данные окуражающей среды
    Working temperature range: -20 °C ... 115 °C
    Storage temperature range: -40 °C ... 125 °C
    Относительная влажность / конденсат: Condensation not permitted
    Устойчивость к ударам: 100 g (IEC 60068-2-27)
    Resistance to vibration: 50 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
    Enclosure rating: IP 40
     
    Арт. 1054320

    At a glance

  • Motor feedback system with HIPERFACE DSL® interface
  • Compact, robust design with 36 mm diameter
  • Up to 20 bit resolution per revolution and 4,096 revolutions measurable with the multiturn system
  • Facility for connecting an external temperature sensor
  • E²Prom with 8 kbyte of free memory space
  • SIL2-certified (only valid for EKS/EKM36-2...)
  • Service life histogram

    Your benefits

  • Saving all analog components on the controller part through exclusively digital data transmission
  • Enormous cost saving thanks to the separate encoder cable no longer being necessary, data transmitted synchronously to the controller cycle
  • Minimal cabling thanks to integration of the encoder communication into the motor cable
  • Optimization of the controller circuit via automatic synchronization with the controller cycle
    Performance
    Number of the absolute ascertainable revolutions: Multiturn
    Available memory area: 8,192 Byte 1)
    Mechanical data
    Тип фланца/муфты статора: Spring mounting plate, Ø 36
    Moment of inertia of the rotor: 4.5 gcm²
    Момент вращения: 0.2 Ncm
    Крутящий момент на старте: 0.3 Ncm
    Допустимое перемещение вала, радиальное статические: ± 0.1 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.05 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.5 mm
    Permissible shaft movement, axial, dynamic: ± 0.1 mm
    Maximum operating speed: 9,000 U/min
    Electrical data
    Electrical interface: HIPERFACE DSL
    Данные окуражающей среды
    Working temperature range: -20 °C ... 115 °C
    Storage temperature range: -40 °C ... 125 °C
    Относительная влажность / конденсат: Condensation not permitted
    Устойчивость к ударам: 100 g (IEC 60068-2-27)
    Resistance to vibration: 50 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
    Enclosure rating: IP 40
     
    Арт. 1052022

    At a glance

  • Motor feedback system with HIPERFACE DSL® interface
  • Compact, robust design with 36 mm diameter
  • Up to 20 bit resolution per revolution and 4,096 revolutions measurable with the multiturn system
  • Facility for connecting an external temperature sensor
  • E²Prom with 8 kbyte of free memory space
  • SIL2-certified (only valid for EKS/EKM36-2...)
  • Service life histogram

    Your benefits

  • Saving all analog components on the controller part through exclusively digital data transmission
  • Enormous cost saving thanks to the separate encoder cable no longer being necessary, data transmitted synchronously to the controller cycle
  • Minimal cabling thanks to integration of the encoder communication into the motor cable
  • Optimization of the controller circuit via automatic synchronization with the controller cycle
    Performance
    Number of the absolute ascertainable revolutions: Singleturn
    Available memory area: 8,192 Byte 1)
    Mechanical data
    Тип фланца/муфты статора: Spring mounting plate, Ø 36
    Moment of inertia of the rotor: 4.5 gcm²
    Момент вращения: 0.2 Ncm
    Крутящий момент на старте: 0.3 Ncm
    Допустимое перемещение вала, радиальное статические: ± 0.1 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.05 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.5 mm
    Permissible shaft movement, axial, dynamic: ± 0.1 mm
    Maximum operating speed: 12,000 U/min
    Electrical data
    Electrical interface: HIPERFACE DSL
    Данные окуражающей среды
    Working temperature range: -20 °C ... 115 °C
    Storage temperature range: -40 °C ... 125 °C
    Относительная влажность / конденсат: Condensation not permitted
    Устойчивость к ударам: 100 g (IEC 60068-2-27)
    Resistance to vibration: 50 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
    Enclosure rating: IP 40
     
    Арт. 1052023

    At a glance

  • Motor feedback system with HIPERFACE DSL® interface
  • Compact, robust design with 36 mm diameter
  • Up to 20 bit resolution per revolution and 4,096 revolutions measurable with the multiturn system
  • Facility for connecting an external temperature sensor
  • E²Prom with 8 kbyte of free memory space
  • SIL2-certified (only valid for EKS/EKM36-2...)
  • Service life histogram

    Your benefits

  • Saving all analog components on the controller part through exclusively digital data transmission
  • Enormous cost saving thanks to the separate encoder cable no longer being necessary, data transmitted synchronously to the controller cycle
  • Minimal cabling thanks to integration of the encoder communication into the motor cable
  • Optimization of the controller circuit via automatic synchronization with the controller cycle
    Performance
    Number of the absolute ascertainable revolutions: Multiturn
    Available memory area: 8,192 Byte 1)
    Mechanical data
    Тип фланца/муфты статора: Spring mounting plate, Ø 36
    Moment of inertia of the rotor: 4.5 gcm²
    Момент вращения: 0.2 Ncm
    Крутящий момент на старте: 0.3 Ncm
    Допустимое перемещение вала, радиальное статические: ± 0.1 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.05 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.5 mm
    Permissible shaft movement, axial, dynamic: ± 0.1 mm
    Maximum operating speed: 9,000 U/min
    Electrical data
    Electrical interface: HIPERFACE DSL
    Данные окуражающей среды
    Working temperature range: -20 °C ... 115 °C
    Storage temperature range: -40 °C ... 125 °C
    Относительная влажность / конденсат: Condensation not permitted
    Устойчивость к ударам: 100 g (IEC 60068-2-27)
    Resistance to vibration: 50 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
    Enclosure rating: IP 40
     
    Арт. 1054319

    At a glance

  • Motor feedback system with HIPERFACE DSL® interface
  • Compact, robust design with 36 mm diameter
  • Up to 20 bit resolution per revolution and 4,096 revolutions measurable with the multiturn system
  • Facility for connecting an external temperature sensor
  • E²Prom with 8 kbyte of free memory space
  • SIL2-certified (only valid for EKS/EKM36-2...)
  • Service life histogram

    Your benefits

  • Saving all analog components on the controller part through exclusively digital data transmission
  • Enormous cost saving thanks to the separate encoder cable no longer being necessary, data transmitted synchronously to the controller cycle
  • Minimal cabling thanks to integration of the encoder communication into the motor cable
  • Optimization of the controller circuit via automatic synchronization with the controller cycle
    Performance
    Number of the absolute ascertainable revolutions: Singleturn
    Available memory area: 8,192 Byte 1)
    Mechanical data
    Тип фланца/муфты статора: Spring mounting plate, Ø 36
    Moment of inertia of the rotor: 4.5 gcm²
    Момент вращения: 0.2 Ncm
    Крутящий момент на старте: 0.3 Ncm
    Допустимое перемещение вала, радиальное статические: ± 0.1 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.05 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.5 mm
    Permissible shaft movement, axial, dynamic: ± 0.1 mm
    Maximum operating speed: 12,000 U/min
    Electrical data
    Electrical interface: HIPERFACE DSL
    Данные окуражающей среды
    Working temperature range: -20 °C ... 115 °C
    Storage temperature range: -40 °C ... 125 °C
    Относительная влажность / конденсат: Condensation not permitted
    Устойчивость к ударам: 100 g (IEC 60068-2-27)
    Resistance to vibration: 50 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
    Enclosure rating: IP 40
     
    Арт. 1054315

    At a glance

  • Motor feedback system with HIPERFACE DSL® interface
  • Compact, robust design with 36 mm diameter
  • Up to 20 bit resolution per revolution and 4,096 revolutions measurable with the multiturn system
  • Facility for connecting an external temperature sensor
  • E²Prom with 8 kbyte of free memory space
  • SIL2-certified (only valid for EKS/EKM36-2...)
  • Service life histogram

    Your benefits

  • Saving all analog components on the controller part through exclusively digital data transmission
  • Enormous cost saving thanks to the separate encoder cable no longer being necessary, data transmitted synchronously to the controller cycle
  • Minimal cabling thanks to integration of the encoder communication into the motor cable
  • Optimization of the controller circuit via automatic synchronization with the controller cycle
    Performance
    Number of the absolute ascertainable revolutions: Singleturn
    Available memory area: 8,192 Byte 1)
    Mechanical data
    Тип фланца/муфты статора: Spring mounting plate, Ø 36
    Moment of inertia of the rotor: 4.5 gcm²
    Момент вращения: 0.2 Ncm
    Крутящий момент на старте: 0.3 Ncm
    Допустимое перемещение вала, радиальное статические: ± 0.1 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.05 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.5 mm
    Permissible shaft movement, axial, dynamic: ± 0.1 mm
    Maximum operating speed: 12,000 U/min
    Electrical data
    Electrical interface: HIPERFACE DSL
    Данные окуражающей среды
    Working temperature range: -20 °C ... 115 °C
    Storage temperature range: -40 °C ... 125 °C
    Относительная влажность / конденсат: Condensation not permitted
    Устойчивость к ударам: 100 g (IEC 60068-2-27)
    Resistance to vibration: 50 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
    Enclosure rating: IP 40
     
    Арт. 1054323

    At a glance

  • Motor feedback system with HIPERFACE DSL® interface
  • Compact, robust design with 36 mm diameter
  • Up to 20 bit resolution per revolution and 4,096 revolutions measurable with the multiturn system
  • Facility for connecting an external temperature sensor
  • E²Prom with 8 kbyte of free memory space
  • SIL2-certified (only valid for EKS/EKM36-2...)
  • Service life histogram

    Your benefits

  • Saving all analog components on the controller part through exclusively digital data transmission
  • Enormous cost saving thanks to the separate encoder cable no longer being necessary, data transmitted synchronously to the controller cycle
  • Minimal cabling thanks to integration of the encoder communication into the motor cable
  • Optimization of the controller circuit via automatic synchronization with the controller cycle
    Performance
    Number of the absolute ascertainable revolutions: Singleturn
    Available memory area: 8,192 Byte 1)
    Mechanical data
    Тип фланца/муфты статора: Spring mounting plate, Ø 36
    Moment of inertia of the rotor: 4.5 gcm²
    Момент вращения: 0.2 Ncm
    Крутящий момент на старте: 0.3 Ncm
    Допустимое перемещение вала, радиальное статические: ± 0.1 mm
    Допустимое перемещение вала, радиальное, динамическое: ± 0.05 mm
    Допустимое перемещение вала, аксиальное, статическое: ± 0.5 mm
    Permissible shaft movement, axial, dynamic: ± 0.1 mm
    Maximum operating speed: 12,000 U/min
    Electrical data
    Electrical interface: HIPERFACE DSL
    Данные окуражающей среды
    Working temperature range: -20 °C ... 115 °C
    Storage temperature range: -40 °C ... 125 °C
    Относительная влажность / конденсат: Condensation not permitted
    Устойчивость к ударам: 100 g (IEC 60068-2-27)
    Resistance to vibration: 50 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
    Enclosure rating: IP 40
     
     

     
     
     
    Имя Отчество:
     
    Адрес электронной почты:
     
    Контактный телефон:
     
    Наименование компании:
     
    Содержание заказа: