This part is replaced by: mounting adapter BEF-KHZ-PT1 (2022702) + sensor (MZT1 or MZT6). Please choose a MZT1 or MZT6 sensor based on your circuit type (PNP, NPN) and your connection (M12, M8 or 2 m cable). You will need the adjustable mounting adapter BEF-KHZ-PT1 (2022702) to mount the MZT1 or MZT6 sensor to your tie-rod.
| Product features | |||
| Series: | MZZ2 | ||
| Sensing face: | Front | ||
| Output type: | PNP | ||
| Output function: | Normally open | ||
| Частота переключений: | 5,000 Hz | ||
| Тип подключения: | Connector, M12, 4-pin | ||
| Technical data | |||
| Length:: | 35 mm | ||
| Dimensions (W x H x L): | 35 mm | ||
| Supply voltage:: | DC 10 ... 30 V | ||
| Пульсации: | ≤ 10 % 1) | ||
| Падение напряжения: | 1.5 2) | ||
| Потребляемая мощность: | ≤ 10 mA | ||
| Magnetic field sensitivity, min.: | 3 mT | ||
| Continuous current:: | 300 | ||
| Time delay before availability:: | ≤ 2 ms | ||
| Hysteresis H, of sr: | ≤ 1 mm | ||
| Повторяемость: | (Ub and Ta constant), 0.1 (Ub and Ta constant) | ||
| EMC: | According to EN 60947-5-2 | ||
| Wire-break protection: | 1 | ||
| Short-circuit protection (pulsed):: | 1 | ||
| Защита от обратной полярности: | 1 | ||
| Импульсная защита: | 1 | ||
| Ambient temperature min ... max:: | -25 °C ... +75 °C | ||
| Материал корпуса: | Aluminium, plastic | ||
| Ex-i:: | 0 | ||
| ATEX:: | 0 | ||
| Enclosure rating:: | IP 67 3) | ||
This part is replaced by: mounting adapter BEF-KHZ-PT1 (2022702) + sensor (MZT1 or MZT6). Please choose a MZT1 or MZT6 sensor based on your circuit type (PNP, NPN) and your connection (M12, M8 or 2 m cable). You will need the adjustable mounting adapter BEF-KHZ-PT1 (2022702) to mount the MZT1 or MZT6 sensor to your tie-rod.
| Product features | |||
| Series: | MZZ2 | ||
| Sensing face: | Front | ||
| Output type: | PNP | ||
| Output function: | Normally open | ||
| Частота переключений: | 5,000 Hz | ||
| Тип подключения: | Cable, PVC/PUR, 2 m | ||
| Technical data | |||
| Length:: | 35 mm | ||
| Dimensions (W x H x L): | 35 mm | ||
| Supply voltage:: | DC 10 ... 30 V | ||
| Пульсации: | ≤ 10 % 1) | ||
| Падение напряжения: | 1.5 2) | ||
| Потребляемая мощность: | ≤ 10 mA | ||
| Magnetic field sensitivity, min.: | 3 mT | ||
| Continuous current:: | 300 | ||
| Time delay before availability:: | ≤ 2 ms | ||
| Hysteresis H, of sr: | ≤ 1 mm | ||
| Повторяемость: | (Ub and Ta constant), 0.1 (Ub and Ta constant) | ||
| EMC: | According to EN 60947-5-2 | ||
| Wire-break protection: | 1 | ||
| Short-circuit protection (pulsed):: | 1 | ||
| Защита от обратной полярности: | 1 | ||
| Импульсная защита: | 1 | ||
| Ambient temperature min ... max:: | -25 °C ... +75 °C | ||
| Материал корпуса: | Aluminium, plastic | ||
| Ex-i:: | 0 | ||
| ATEX:: | 0 | ||
| Enclosure rating:: | IP 67 3) | ||
This part is replaced by: mounting adapter BEF-KHZ-PT1 (2022702) + sensor (MZT1 or MZT6). Please choose a MZT1 or MZT6 sensor based on your circuit type (PNP, NPN) and your connection (M12, M8 or 2 m cable). You will need the adjustable mounting adapter BEF-KHZ-PT1 (2022702) to mount the MZT1 or MZT6 sensor to your tie-rod.
| Product features | |||
| Series: | MZZ2 | ||
| Sensing face: | Centre | ||
| Output type: | NPN | ||
| Output function: | Normally open | ||
| Частота переключений: | 5,000 Hz | ||
| Тип подключения: | Cable, PVC/PUR, 2 m | ||
| Technical data | |||
| Length:: | 35 mm | ||
| Dimensions (W x H x L): | 35 mm | ||
| Supply voltage:: | DC 10 ... 30 V | ||
| Пульсации: | ≤ 10 % 1) | ||
| Падение напряжения: | 1.5 2) | ||
| Потребляемая мощность: | ≤ 10 mA | ||
| Magnetic field sensitivity, min.: | 3 mT | ||
| Continuous current:: | 300 | ||
| Time delay before availability:: | ≤ 2 ms | ||
| Hysteresis H, of sr: | ≤ 1 mm | ||
| Повторяемость: | (Ub and Ta constant), 0.1 (Ub and Ta constant) | ||
| EMC: | According to EN 60947-5-2 | ||
| Wire-break protection: | 1 | ||
| Short-circuit protection (pulsed):: | 1 | ||
| Защита от обратной полярности: | 1 | ||
| Импульсная защита: | 1 | ||
| Ambient temperature min ... max:: | -25 °C ... +75 °C | ||
| Материал корпуса: | Aluminium, plastic | ||
| Ex-i:: | 0 | ||
| ATEX:: | 0 | ||
| Enclosure rating:: | IP 67 3) | ||
This part is replaced by: mounting adapter BEF-KHZ-PT1 (2022702) + sensor (MZT1 or MZT6). Please choose a MZT1 or MZT6 sensor based on your circuit type (PNP, NPN) and your connection (M12, M8 or 2 m cable). You will need the adjustable mounting adapter BEF-KHZ-PT1 (2022702) to mount the MZT1 or MZT6 sensor to your tie-rod.
| Product features | |||
| Series: | MZZ2 | ||
| Sensing face: | Centre | ||
| Output type: | PNP | ||
| Output function: | Normally open | ||
| Частота переключений: | 5,000 Hz | ||
| Тип подключения: | Connector, M12, 4-pin | ||
| Technical data | |||
| Length:: | 35 mm | ||
| Dimensions (W x H x L): | 35 mm | ||
| Supply voltage:: | DC 10 ... 30 V | ||
| Пульсации: | ≤ 10 % 1) | ||
| Падение напряжения: | 1.5 2) | ||
| Потребляемая мощность: | ≤ 10 mA | ||
| Magnetic field sensitivity, min.: | 3 mT | ||
| Continuous current:: | 300 | ||
| Time delay before availability:: | ≤ 2 ms | ||
| Hysteresis H, of sr: | ≤ 1 mm | ||
| Повторяемость: | (Ub and Ta constant), 0.1 (Ub and Ta constant) | ||
| EMC: | According to EN 60947-5-2 | ||
| Wire-break protection: | 1 | ||
| Short-circuit protection (pulsed):: | 1 | ||
| Защита от обратной полярности: | 1 | ||
| Импульсная защита: | 1 | ||
| Ambient temperature min ... max:: | -25 °C ... +75 °C | ||
| Материал корпуса: | Aluminium, plastic | ||
| Ex-i:: | 0 | ||
| ATEX:: | 0 | ||
| Enclosure rating:: | IP 67 3) | ||
This part is replaced by: mounting adapter BEF-KHZ-PT1 (2022702) + sensor (MZT1 or MZT6). Please choose a MZT1 or MZT6 sensor based on your circuit type (PNP, NPN) and your connection (M12, M8 or 2 m cable). You will need the adjustable mounting adapter BEF-KHZ-PT1 (2022702) to mount the MZT1 or MZT6 sensor to your tie-rod.
| Product features | |||
| Series: | MZZ2 | ||
| Sensing face: | Centre | ||
| Output type: | PNP | ||
| Output function: | Normally open | ||
| Частота переключений: | 5,000 Hz | ||
| Тип подключения: | Cable, PVC/PUR, 2 m | ||
| Technical data | |||
| Length:: | 35 mm | ||
| Dimensions (W x H x L): | 35 mm | ||
| Supply voltage:: | DC 10 ... 30 V | ||
| Пульсации: | ≤ 10 % 1) | ||
| Падение напряжения: | 1.5 2) | ||
| Потребляемая мощность: | ≤ 10 mA | ||
| Magnetic field sensitivity, min.: | 3 mT | ||
| Continuous current:: | 300 | ||
| Time delay before availability:: | ≤ 2 ms | ||
| Hysteresis H, of sr: | ≤ 1 mm | ||
| Повторяемость: | (Ub and Ta constant), 0.1 (Ub and Ta constant) | ||
| EMC: | According to EN 60947-5-2 | ||
| Wire-break protection: | 1 | ||
| Short-circuit protection (pulsed):: | 1 | ||
| Защита от обратной полярности: | 1 | ||
| Импульсная защита: | 1 | ||
| Ambient temperature min ... max:: | -25 °C ... +75 °C | ||
| Материал корпуса: | Aluminium, plastic | ||
| Ex-i:: | 0 | ||
| ATEX:: | 0 | ||
| Enclosure rating:: | IP 67 3) | ||