Звоните (Россия)
  +7 (812) 432-38-38
432-36-36
Звоните (Казахстан)
  +7 (701) 169-20-01
+7 (701) 169-20-01
 
График работы
пн-пт. 10:00 — 18:00
 
 

CDM / CDM420

 
 
Арт. 1025362

At a glance

  • Efficient solution to power and connect to SICK’s Auto-ID component portfolio
  • Slots for optional fieldbus modules, parameter memory, display and power supply module
  • Simple voltage supply of scanner
  • IP 65 connection of a scanner using SICK standard cable
  • Direct access to the service interface of the sensor
  • Connection diagram integrated in lid
  • Clearly visible and easily accessible screw/spring-loaded terminals

    Your benefits

  • Easy connection of the sensor to fieldbus systems
  • Fast exchange of the sensor through parameter memory CMC
  • Fast installation and easy networking save time
  • Simple troubleshooting
  • Easy diagnosis via optional CMD400 display module
    Features
    Краткое описание: Modular connection module for one sensor
    Поддерживаемые продукты: CLV42x, CLV43x, CLV44x, CLV45x, CLV62x, CLV63x, CLV64x, CLV65x, ICR84x-2, ICR85x-2, IDM12x, IDM14x, IDM16x, IDM24x, IDM26x, Lector®62x, RFH620
    Supports cloning module (CMC): Yes
    Supports display module (CMD): Yes
    Supports power supply module (CMP): Yes
    Supports fieldbus gateway (CMF): Yes (PROFIBUS DP, Ethernet, DeviceNet)
    Interfaces
    Serial (RS-232, RS-422/485):
    Remark (Serial (RS-232, RS-422/485)): Depending on sensor connected
    Ethernet:
    Remark (Ethernet): Depending on Sensor connected; corresponding CMF fieldbus gateway additionally necessary
    CAN bus:
    Remark (CAN bus): Depending on sensor connected
    PROFIBUS DP:
    DeviceNet:
    Remark (DeviceNet): Corresponding CMF fieldbus gateway additionally necessary
    Switching inputs: Depending on sensor connected
    Switching outputs: Depending on sensor connected
    Оптический индикатор: 5 LED
    Remark (PROFIBUS DP): Corresponding CMF fieldbus gateway additionally necessary
    Конфигурация программного обеспечения: SOPAS ET
    Механика/электроника
    Потребляемая мощность: Power consumption of the sensor + 1 W
    Housing: Polycarbonat
    Enclosure rating: IP 65 (DIN 40 050) 1)
    Класс защиты: III (VDE 0106)
    Вес: 800 g
    Dimensions: 192 mm x 167 mm x 70 mm
    Цвет корпуса: Blue (RAL 5012)
    Подключения сканера: 15-pin D-Sub HD socket
    Сервисный разъем: 9-pin D-Sub plug (internal)
    Данные окуражающей среды
    Ambient operating temperature: -35 °C ... +40 °C
    Storage temperature: -35 °C ... +70 °C
    Permissible relative humidity: ± 90 %, non-condensing
     
    Арт. 1028487

    At a glance

  • Efficient solution to power and connect to SICK’s Auto-ID component portfolio
  • Slots for optional fieldbus modules, parameter memory, display and power supply module
  • Simple voltage supply of scanner
  • IP 65 connection of a scanner using SICK standard cable
  • Direct access to the service interface of the sensor
  • Connection diagram integrated in lid
  • Clearly visible and easily accessible screw/spring-loaded terminals

    Your benefits

  • Easy connection of the sensor to fieldbus systems
  • Fast exchange of the sensor through parameter memory CMC
  • Fast installation and easy networking save time
  • Simple troubleshooting
  • Easy diagnosis via optional CMD400 display module
    Features
    Краткое описание: Modular connection module for two sensors
    Поддерживаемые продукты: CLV42x, CLV43x, CLV44x, CLV45x, CLV62x, CLV63x, CLV64x, CLV65x, ICR84x-2, ICR85x-2, IDM12x, IDM14x, IDM16x, IDM24x, IDM26x, Lector®62x, RFH620
    Supports cloning module (CMC): Yes
    Supports display module (CMD): Yes
    Supports power supply module (CMP): Yes
    Supports fieldbus gateway (CMF): Yes (PROFIBUS DP, Ethernet, DeviceNet)
    Interfaces
    Serial (RS-232, RS-422/485):
    Remark (Serial (RS-232, RS-422/485)): Depending on sensor connected
    Ethernet:
    Remark (Ethernet): Depending on Sensor connected; corresponding CMF fieldbus gateway additionally necessary
    CAN bus:
    Remark (CAN bus): Depending on sensor connected
    PROFIBUS DP:
    DeviceNet:
    Remark (DeviceNet): Corresponding CMF fieldbus gateway additionally necessary
    Switching inputs: Depending on sensor connected
    Switching outputs: Depending on sensor connected
    Оптический индикатор: 5 LED
    Remark (PROFIBUS DP): Corresponding CMF fieldbus gateway additionally necessary
    Конфигурация программного обеспечения: SOPAS ET
    Механика/электроника
    Потребляемая мощность: Power consumption of the sensor + 1 W
    Housing: Polycarbonat
    Enclosure rating: IP 65 (DIN 40 050) 1)
    Класс защиты: III (VDE 0106)
    Вес: 800 g
    Dimensions: 192 mm x 167 mm x 70 mm
    Цвет корпуса: Blue (RAL 5012)
    Подключения сканера: 15-pin D-Sub HD socket
    Сервисный разъем: 9-pin D-Sub plug (internal)
    Данные окуражающей среды
    Ambient operating temperature: -35 °C ... +40 °C
    Storage temperature: -35 °C ... +70 °C
    Permissible relative humidity: ± 90 %, non-condensing
     
    Арт. 1058634

    At a glance

  • Efficient solution to power and connect to SICK’s Auto-ID component portfolio
  • Slots for optional fieldbus modules, parameter memory, display and power supply module
  • Simple voltage supply of scanner
  • IP 65 connection of a scanner using SICK standard cable
  • Direct access to the service interface of the sensor
  • Connection diagram integrated in lid
  • Clearly visible and easily accessible screw/spring-loaded terminals

    Your benefits

  • Easy connection of the sensor to fieldbus systems
  • Fast exchange of the sensor through parameter memory CMC
  • Fast installation and easy networking save time
  • Simple troubleshooting
  • Easy diagnosis via optional CMD400 display module
    Features
    Краткое описание: Modular connection module for one sensor, 2 A fuse
    Поддерживаемые продукты: CLV61x - CLV65x, CLV69x, Lector®62x, Lector®65x, RFH6xx, RFU62x, RFU63x
    Supports cloning module (CMC): Yes
    Supports display module (CMD): Yes
    Supports power supply module (CMP): Yes
    Supports fieldbus gateway (CMF): Yes (PROFIBUS DP, Ethernet, DeviceNet)
    Interfaces
    Serial (RS-232, RS-422/485):
    Remark (Serial (RS-232, RS-422/485)): Depending on sensor connected
    Ethernet:
    Remark (Ethernet): Depending on Sensor connected; corresponding CMF fieldbus gateway additionally necessary
    CAN bus:
    Remark (CAN bus): Depending on sensor connected
    PROFIBUS DP:
    DeviceNet:
    Remark (DeviceNet): Corresponding CMF fieldbus gateway additionally necessary
    Switching inputs: Depending on sensor connected
    Switching outputs: Depending on sensor connected
    Оптический индикатор: 5 LED
    Remark (PROFIBUS DP): Corresponding CMF fieldbus gateway additionally necessary
    Конфигурация программного обеспечения: SOPAS ET
    Механика/электроника
    Потребляемая мощность: Power consumption of the sensor + 1 W
    Housing: Polycarbonat
    Enclosure rating: IP 65 (DIN 40 050) 1)
    Класс защиты: III (VDE 0106)
    Вес: 800 g
    Dimensions: 192 mm x 167 mm x 70 mm
    Цвет корпуса: Blue (RAL 5012)
    Подключения сканера: 15-pin D-Sub HD socket
    Сервисный разъем: 9-pin D-Sub plug (internal)
    Данные окуражающей среды
    Ambient operating temperature: -35 °C ... +40 °C
    Storage temperature: -35 °C ... +70 °C
    Permissible relative humidity: ± 90 %, non-condensing
     
    Арт. 1060324

    At a glance

  • Efficient solution to power and connect to SICK’s Auto-ID component portfolio
  • Slots for optional fieldbus modules, parameter memory, display and power supply module
  • Simple voltage supply of scanner
  • IP 65 connection of a scanner using SICK standard cable
  • Direct access to the service interface of the sensor
  • Connection diagram integrated in lid
  • Clearly visible and easily accessible screw/spring-loaded terminals

    Your benefits

  • Easy connection of the sensor to fieldbus systems
  • Fast exchange of the sensor through parameter memory CMC
  • Fast installation and easy networking save time
  • Simple troubleshooting
  • Easy diagnosis via optional CMD400 display module
    Features
    Краткое описание: Modular connection module for two sensors, 2 A fuse
    Поддерживаемые продукты: CLV61x - CLV65x, CLV69x, Lector®62x, Lector®65x, RFH6xx, RFU62x, RFU63x
    Supports cloning module (CMC): Yes
    Supports display module (CMD): Yes
    Supports power supply module (CMP): Yes
    Supports fieldbus gateway (CMF): Yes (PROFIBUS DP, Ethernet, DeviceNet)
    Interfaces
    Serial (RS-232, RS-422/485):
    Remark (Serial (RS-232, RS-422/485)): Depending on sensor connected
    Ethernet:
    Remark (Ethernet): Depending on Sensor connected; corresponding CMF fieldbus gateway additionally necessary
    CAN bus:
    Remark (CAN bus): Depending on sensor connected
    PROFIBUS DP:
    DeviceNet:
    Remark (DeviceNet): Corresponding CMF fieldbus gateway additionally necessary
    Switching inputs: Depending on sensor connected
    Switching outputs: Depending on sensor connected
    Оптический индикатор: 5 LED
    Remark (PROFIBUS DP): Corresponding CMF fieldbus gateway additionally necessary
    Конфигурация программного обеспечения: SOPAS ET
    Механика/электроника
    Потребляемая мощность: Power consumption of the sensor + 1 W
    Housing: Polycarbonat
    Enclosure rating: IP 65 (DIN 40 050) 1)
    Класс защиты: III (VDE 0106)
    Вес: 800 g
    Dimensions: 192 mm x 167 mm x 70 mm
    Цвет корпуса: Blue (RAL 5012)
    Подключения сканера: 15-pin D-Sub HD socket
    Сервисный разъем: 9-pin D-Sub plug (internal)
    Данные окуражающей среды
    Ambient operating temperature: -35 °C ... +40 °C
    Storage temperature: -35 °C ... +70 °C
    Permissible relative humidity: ± 90 %, non-condensing
     
    Арт. 1025364

    At a glance

  • Efficient solution to power and connect to SICK’s Auto-ID component portfolio
  • Slots for optional fieldbus modules, parameter memory, display and power supply module
  • Simple voltage supply of scanner
  • IP 65 connection of a scanner using SICK standard cable
  • Direct access to the service interface of the sensor
  • Connection diagram integrated in lid
  • Clearly visible and easily accessible screw/spring-loaded terminals

    Your benefits

  • Easy connection of the sensor to fieldbus systems
  • Fast exchange of the sensor through parameter memory CMC
  • Fast installation and easy networking save time
  • Simple troubleshooting
  • Easy diagnosis via optional CMD400 display module
    Features
    Краткое описание: Modular connection module for one sensor, Host and AUX interface available on face plate
    Поддерживаемые продукты: CLV42x, CLV43x, CLV44x, CLV45x, CLV62x, CLV63x, CLV64x, CLV65x, ICR84x-2, ICR85x-2, Lector®62x
    Supports cloning module (CMC): Yes
    Supports display module (CMD): Yes
    Supports power supply module (CMP): Yes
    Supports fieldbus gateway (CMF): No
    Interfaces
    Serial (RS-232, RS-422/485):
    Remark (Serial (RS-232, RS-422/485)): Depending on sensor connected
    Ethernet: -
    CAN bus:
    Remark (CAN bus): Depending on sensor connected
    PROFIBUS DP: -
    DeviceNet: -
    Switching inputs: Depending on sensor connected
    Switching outputs: Depending on sensor connected
    Оптический индикатор: 5 LED
    Конфигурация программного обеспечения: SOPAS ET
    Механика/электроника
    Потребляемая мощность: Power consumption of the sensor + 1 W
    Housing: Polycarbonat
    Enclosure rating: IP 65 (DIN 40 050) 1)
    Класс защиты: III (VDE 0106)
    Вес: 800 g
    Dimensions: 192 mm x 167 mm x 70 mm
    Цвет корпуса: Blue (RAL 5012)
    Подключения сканера: 15-pin D-Sub HD socket
    Сервисный разъем: 9-pin D-Sub plug (internal)
    Данные окуражающей среды
    Ambient operating temperature: -35 °C ... +40 °C
    Storage temperature: -35 °C ... +70 °C
    Permissible relative humidity: ± 90 %, non-condensing
     
    Арт. 1026220

    At a glance

  • Efficient solution to power and connect to SICK’s Auto-ID component portfolio
  • Slots for optional fieldbus modules, parameter memory, display and power supply module
  • Simple voltage supply of scanner
  • IP 65 connection of a scanner using SICK standard cable
  • Direct access to the service interface of the sensor
  • Connection diagram integrated in lid
  • Clearly visible and easily accessible screw/spring-loaded terminals

    Your benefits

  • Easy connection of the sensor to fieldbus systems
  • Fast exchange of the sensor through parameter memory CMC
  • Fast installation and easy networking save time
  • Simple troubleshooting
  • Easy diagnosis via optional CMD400 display module
    Features
    Краткое описание: Kit: modular connection module for one sensor, Host and AUX interface available on face plate, power supply CMP400, US power cord
    Поддерживаемые продукты: CLV42x, CLV43x, CLV44x, CLV45x, CLV62x, CLV63x, CLV64x, CLV65x, ICR845-2, ICR84x-2, ICR84x-2 FlexLens, ICR85x-2, Lector®62x, RFH620
    Supports cloning module (CMC): Yes
    Supports display module (CMD): Yes
    Supports power supply module (CMP): Yes
    Supports fieldbus gateway (CMF): No
    Interfaces
    Serial (RS-232, RS-422/485):
    Remark (Serial (RS-232, RS-422/485)): Depending on sensor connected
    Ethernet: -
    CAN bus:
    Remark (CAN bus): Depending on sensor connected
    PROFIBUS DP: -
    DeviceNet: -
    Switching inputs: Depending on sensor connected
    Switching outputs: Depending on sensor connected
    Оптический индикатор: 5 LED
    Конфигурация программного обеспечения: SOPAS ET
    Механика/электроника
    Потребляемая мощность: Power consumption of the sensor + 1 W
    Housing: Polycarbonat
    Enclosure rating: IP 65 (DIN 40 050) 1)
    Класс защиты: III (VDE 0106)
    Вес: 800 g
    Dimensions: 192 mm x 167 mm x 70 mm
    Цвет корпуса: Blue (RAL 5012)
    Подключения сканера: 15-pin D-Sub HD socket
    Сервисный разъем: 9-pin D-Sub plug (internal)
    Данные окуражающей среды
    Ambient operating temperature: 0 °C ... +40 °C
    Storage temperature: -20 °C ... +70 °C
    Permissible relative humidity: ± 90 %, non-condensing
     
    Арт. 1040002

    At a glance

  • Efficient solution to power and connect to SICK’s Auto-ID component portfolio
  • Slots for optional fieldbus modules, parameter memory, display and power supply module
  • Simple voltage supply of scanner
  • IP 65 connection of a scanner using SICK standard cable
  • Direct access to the service interface of the sensor
  • Connection diagram integrated in lid
  • Clearly visible and easily accessible screw/spring-loaded terminals

    Your benefits

  • Easy connection of the sensor to fieldbus systems
  • Fast exchange of the sensor through parameter memory CMC
  • Fast installation and easy networking save time
  • Simple troubleshooting
  • Easy diagnosis via optional CMD400 display module
    Features
    Краткое описание: Modular connection module for one sensor with pre-mounted CMF400 PROFIBUS module (Interface 9-pin D-sub) and integrated CMC parameter cloning module
    Поддерживаемые продукты: CLV42x, CLV43x, CLV44x, CLV45x, CLV62x, CLV63x, CLV64x, CLV65x, ICR84x-2, ICR85x-2
    Supports cloning module (CMC): Yes
    Supports display module (CMD): Yes
    Supports power supply module (CMP): Yes
    Supports fieldbus gateway (CMF): Integrated (PROFIBUS DP)
    Interfaces
    Serial (RS-232, RS-422/485):
    Remark (Serial (RS-232, RS-422/485)): Depending on sensor connected
    Ethernet:
    Remark (Ethernet): Corresponding CMF fieldbus gateway additionally necessary
    CAN bus:
    Remark (CAN bus): Depending on sensor connected
    PROFIBUS DP:
    DeviceNet:
    Remark (DeviceNet): Corresponding CMF fieldbus gateway additionally necessary
    Switching inputs: Depending on sensor connected
    Switching outputs: Depending on sensor connected
    Оптический индикатор: 5 LED
    Remark (PROFIBUS DP): CMF400 PROFIBUS-Gateway already integrated
    Конфигурация программного обеспечения: SOPAS ET
    Механика/электроника
    Потребляемая мощность: Power consumption of the sensor + 1 W
    Housing: Polycarbonat
    Enclosure rating: IP 65 (DIN 40 050) 1)
    Класс защиты: III (VDE 0106)
    Вес: 800 g
    Dimensions: 192 mm x 167 mm x 70 mm
    Цвет корпуса: Blue (RAL 5012)
    Подключения сканера: 15-pin D-Sub HD socket
    Сервисный разъем: 9-pin D-Sub plug (internal)
    Данные окуражающей среды
    Ambient operating temperature: 0 °C ... +40 °C
    Storage temperature: -20 °C ... +70 °C
    Permissible relative humidity: ± 90 %, non-condensing
     
    Арт. 1064248

    At a glance

  • Efficient solution to power and connect to SICK’s Auto-ID component portfolio
  • Slots for optional fieldbus modules, parameter memory, display and power supply module
  • Simple voltage supply of scanner
  • IP 65 connection of a scanner using SICK standard cable
  • Direct access to the service interface of the sensor
  • Connection diagram integrated in lid
  • Clearly visible and easily accessible screw/spring-loaded terminals

    Your benefits

  • Easy connection of the sensor to fieldbus systems
  • Fast exchange of the sensor through parameter memory CMC
  • Fast installation and easy networking save time
  • Simple troubleshooting
  • Easy diagnosis via optional CMD400 display module
    Features
    Краткое описание: Kit: modular connection module for one sensor, 2 A fuse,Host and AUX interface available on face plate, power supply CMP490, US power cord
    Поддерживаемые продукты: CLV69x, Lector®65x, RFU63x
    Supports cloning module (CMC): Yes (depending on sensor connected)
    Supports display module (CMD): No
    Supports power supply module (CMP): Yes (on board)
    Supports fieldbus gateway (CMF): No
    Interfaces
    Serial (RS-232, RS-422/485):
    Remark (Serial (RS-232, RS-422/485)): Depending on sensor connected
    Ethernet: -
    CAN bus:
    Remark (CAN bus): Depending on sensor connected
    PROFIBUS DP: -
    DeviceNet: -
    Switching inputs: Depending on sensor connected
    Switching outputs: Depending on sensor connected
    Оптический индикатор: 5 LED
    Конфигурация программного обеспечения: SOPAS ET
    Механика/электроника
    Потребляемая мощность: Power consumption of the sensor + 1 W
    Housing: Polycarbonat
    Enclosure rating: IP 20 (DIN 40 050) 1)
    Класс защиты: III (VDE 0106)
    Вес: 1,427.8 g
    Dimensions: 192 mm x 167 mm x 70 mm
    Цвет корпуса: Blue (RAL 5012)
    Подключения сканера: 15-pin D-Sub HD socket
    Сервисный разъем: 9-pin D-Sub plug (internal)
    Данные окуражающей среды
    Electromagnetic compatibility (EMC): EN 61000-6-4 (2007-01) / EN 61000-6-2 (2005-08)
    Ambient operating temperature: -35 °C ... +40 °C
    Storage temperature: -20 °C ... +70 °C
    Permissible relative humidity: ± 90 %, non-condensing
    Electrical safety: EN 61010 (2010-01)
     
    Арт. 1029854

    At a glance

  • Efficient solution to power and connect to SICK’s Auto-ID component portfolio
  • Slots for optional fieldbus modules, parameter memory, display and power supply module
  • Simple voltage supply of scanner
  • IP 65 connection of a scanner using SICK standard cable
  • Direct access to the service interface of the sensor
  • Connection diagram integrated in lid
  • Clearly visible and easily accessible screw/spring-loaded terminals

    Your benefits

  • Easy connection of the sensor to fieldbus systems
  • Fast exchange of the sensor through parameter memory CMC
  • Fast installation and easy networking save time
  • Simple troubleshooting
  • Easy diagnosis via optional CMD400 display module
    Features
    Краткое описание: Modular connection module for one sensor with pre-mounted CMF400 PROFIBUS module (Interface 2 x M12) and integrated CMC parameter cloning module
    Поддерживаемые продукты: CLV42x, CLV43x, CLV44x, CLV45x, CLV62x, CLV63x, CLV64x, CLV65x, ICR84x-2, ICR85x-2
    Supports cloning module (CMC): Yes
    Supports display module (CMD): Yes
    Supports power supply module (CMP): Yes
    Supports fieldbus gateway (CMF): Integrated (PROFIBUS DP)
    Interfaces
    Serial (RS-232, RS-422/485):
    Remark (Serial (RS-232, RS-422/485)): Depending on sensor connected
    Ethernet:
    Remark (Ethernet): Corresponding CMF fieldbus gateway additionally necessary
    CAN bus:
    Remark (CAN bus): Depending on sensor connected
    PROFIBUS DP:
    DeviceNet:
    Remark (DeviceNet): Corresponding CMF fieldbus gateway additionally necessary
    Switching inputs: Depending on sensor connected
    Switching outputs: Depending on sensor connected
    Оптический индикатор: 5 LED
    Remark (PROFIBUS DP): CMF400 PROFIBUS-Gateway already integrated
    Конфигурация программного обеспечения: SOPAS ET
    Механика/электроника
    Потребляемая мощность: Power consumption of the sensor + 1 W
    Housing: Polycarbonat
    Enclosure rating: IP 65 (DIN 40 050) 1)
    Класс защиты: III (VDE 0106)
    Вес: 800 g
    Dimensions: 192 mm x 167 mm x 70 mm
    Цвет корпуса: Blue (RAL 5012)
    Подключения сканера: 15-pin D-Sub HD socket
    Сервисный разъем: 9-pin D-Sub plug (internal)
    Данные окуражающей среды
    Ambient operating temperature: 0 °C ... +40 °C
    Storage temperature: -20 °C ... +70 °C
    Permissible relative humidity: ± 90 %, non-condensing
     
     

     
     
     
    Имя Отчество:
     
    Адрес электронной почты:
     
    Контактный телефон:
     
    Наименование компании:
     
    Содержание заказа: