Звоните (Россия)
  +7 (812) 432-38-38
432-36-36
Звоните (Казахстан)
  +7 (701) 169-20-01
+7 (701) 169-20-01
 
График работы
пн-пт. 10:00 — 18:00
 
 

CDF600-2 / CDF600-2 PROFIBUS DP

 
 
Арт. 1058965

At a glance

  • Flexible mounting on all standard profiles
  • Flexible fieldbus connection for PROFIBUS DP and PROFINET IO (depending on type)
  • Code switch for setting node address and operating mode (depending on type)
  • LEDs for status and diagnostics
  • Plug-in electrical connections
  • Integrated configuration memory for connected sensors
  • Compact and flexible

    Your benefits

  • Sophisticated two-screw system for fast, flexible mounting on all standard profiles
  • Choice of different versions for connecting to industrial field buses
  • Code switch that is mounted so it is protected against accidental adjustment and is easily accessible from the outside for easy setup of bus address and operating mode without complex software
  • Clear status LEDs that are identifiable on two sides from any viewing direction for simple and effective diagnosis (depending on type)
  • Fast installation and easy replacement in the system thanks to plug-in connections
  • Integrated cloning module for all configurations of the connected sensor enables very fast replacement time in case of faults
  • Compact and rugged design with choice of horizontal or vertical cable direction
    Features
    Краткое описание: Fieldbus proxy/gateway for connecting identification sensors to PROFIBUS-DP networks (PROFIBUS interface: 2 x M12, male connector/female connector, 5-pin)
    Поддерживаемые продукты: CLV61x, CLV62x, CLV63x, CLV64x, CLV65x, CLV69x, IDM12x, IDM14x, IDM16x, IDM24x, IDM26x, Lector®62x, Lector®65x, RFH6xx, RFU63x
    Supports cloning module (CMC): Integrated
    Supports display module (CMD): No
    Supports power supply module (CMP): No
    Supports fieldbus gateway (CMF): Integrated (PROFIBUS DP)
    Interfaces
    Serial (RS-232):
    Function (Serial (RS-232)): AUX
    Data transmission rate (Serial (RS-232)): 57.6 kBaud
    Ethernet: -
    CAN bus:
    Remark (CAN bus): Depending on sensor connected
    PROFIBUS DP:
    Function (PROFIBUS DP): Slave DP1
    Data transmission rate (PROFIBUS DP): 9.6 kbit/s ... 12 Mbit/s, autodetect
    DeviceNet: -
    Switching inputs: 1
    Switching outputs: 0
    Оптический индикатор: 4 LEDs
    Конфигурация программного обеспечения: SOPAS ET
    Механика/электроника
    Electrical connection: 1 x 15-pin D Sub HD female connector (DEVICE), 1 x 5-pin M12 female connector (EXT. IN1), 1 x 5-pin M12 female connector (PB OUT), 1 x 5-pin M12 male connector (PB IN), 1 x 5-pin M12 male connector (POWER), 1 x USB female connector micro B (AUX)
    Operating voltage: 10 V DC ... 30 V DC
    Потребляемая мощность:
    Housing: Aluminum (unpainted)
    Enclosure rating: IP 65 (EN 60068-2-17 (1995-05))
    Класс защиты: III
    Вес: 385 g
    Dimensions: 207 mm x 49.5 mm x 40.7 mm
    Цвет корпуса: Aluminum (unpainted)
    Подключения сканера: RS-232
    Данные окуражающей среды
    Electromagnetic compatibility (EMC): EN 61000-6-3 (2007-01) / EN 61000-6-2 (2005-08)
    Виброустойчивость: EN 60068-2-6 (2008-10)
    Ударопрочность: EN 60068-2-27 (2010-02)
    Ambient operating temperature: -35 °C ... +50 °C
    Storage temperature: -35 °C ... +70 °C
    Permissible relative humidity: 90 %, non-condensing
     
    Арт. 1058966

    At a glance

  • Flexible mounting on all standard profiles
  • Flexible fieldbus connection for PROFIBUS DP and PROFINET IO (depending on type)
  • Code switch for setting node address and operating mode (depending on type)
  • LEDs for status and diagnostics
  • Plug-in electrical connections
  • Integrated configuration memory for connected sensors
  • Compact and flexible

    Your benefits

  • Sophisticated two-screw system for fast, flexible mounting on all standard profiles
  • Choice of different versions for connecting to industrial field buses
  • Code switch that is mounted so it is protected against accidental adjustment and is easily accessible from the outside for easy setup of bus address and operating mode without complex software
  • Clear status LEDs that are identifiable on two sides from any viewing direction for simple and effective diagnosis (depending on type)
  • Fast installation and easy replacement in the system thanks to plug-in connections
  • Integrated cloning module for all configurations of the connected sensor enables very fast replacement time in case of faults
  • Compact and rugged design with choice of horizontal or vertical cable direction
    Features
    Краткое описание: Fieldbus proxy/gateway for connecting identification sensors to PROFIBUS-DP networks (PROFIBUS interface: 1 x D-Sub, female connector, 9-pin)
    Поддерживаемые продукты: CLV61x, CLV62x, CLV63x, CLV64x, CLV65x, CLV69x, IDM12x, IDM14x, IDM16x, IDM24x, IDM26x, Lector®62x, Lector®65x, RFH6xx, RFU63x
    Supports cloning module (CMC): Integrated
    Supports display module (CMD): No
    Supports power supply module (CMP): No
    Supports fieldbus gateway (CMF): Integrated (PROFIBUS DP)
    Interfaces
    Serial (RS-232):
    Function (Serial (RS-232)): AUX
    Data transmission rate (Serial (RS-232)): 57.6 kBaud
    Ethernet: -
    CAN bus:
    Remark (CAN bus): Depending on sensor connected
    PROFIBUS DP:
    Function (PROFIBUS DP): Slave DP1
    Data transmission rate (PROFIBUS DP): 9.6 kbit/s ... 12 Mbit/s, autodetect
    DeviceNet: -
    Switching inputs: 1
    Switching outputs: 0
    Оптический индикатор: 4 LEDs
    Конфигурация программного обеспечения: SOPAS ET
    Механика/электроника
    Electrical connection: 1 x 15-pin D Sub HD female connector (DEVICE), 1 x 5-pin M12 female connector (EXT. IN1), 1 x 5-pin M12 male connector (POWER), 1 x 9-pin D Sub female connector (PROFIBUS), 1 x USB female connector micro B (AUX)
    Operating voltage: 10 V DC ... 30 V DC
    Потребляемая мощность:
    Housing: Aluminum (unpainted)
    Enclosure rating: IP 20 (EN 60068-2-17 (1995-05))
    Класс защиты: III
    Вес: 375 g
    Dimensions: 207 mm x 49.5 mm x 40.7 mm
    Цвет корпуса: Aluminum (unpainted)
    Подключения сканера: RS-232
    Данные окуражающей среды
    Electromagnetic compatibility (EMC): EN 61000-6-3 (2007-01) / EN 61000-6-2 (2005-08)
    Виброустойчивость: EN 60068-2-6 (2008-10)
    Ударопрочность: EN 60068-2-27 (2010-02)
    Ambient operating temperature: -35 °C ... +50 °C
    Storage temperature: -35 °C ... +70 °C
    Permissible relative humidity: 90 %, non-condensing
     
     

     
     
     
    Имя Отчество:
     
    Адрес электронной почты:
     
    Контактный телефон:
     
    Наименование компании:
     
    Содержание заказа: