+7 (812) 432-38-38
+7 (812) 432-36-36
Пн-Пт 9:00 — 18:00
 
Заказать оборудование
 

Ультразвуковые датчики уровня

 

Ультразвуковые датчики уровня применяют для бесконтактного измерения непрерывного и предельного уровня жидких или сыпучих продуктов. Датчик состоит из генератора ультразвукового сигнала, приемного устройства и электронного контроллера. Ультразвуковой датчик работает по принципу радара. Излучаемый ультразвуковой импульс от датчика отражается от поверхности жидкости или сыпучего материала и попадает обратно в датчик. По времени распространения прямого и отраженного сигнала судят об уровне жидкости. В зависимости от области применения, выпускаются датчики уровня с пороговым или аналоговым выходами, . Ультразвуковые датчики компактны, имеют надежную конструкцию, не имеют подвижных частей и практически не нуждаются в обслуживании.



 
 


Арт. 6048942

At a glance

  • Ultrasonic level sensor with very high chemical resistance
  • Non-contact measurement in immersion pipe of up to 1500 mm
  • PTFE-coated membrane and GF D40 process connection made of PTFE
  • Pressure resistant up to 6 bar, temperature resistant up to 85°C
  • Different sizes available
  • Analog output selectable between 4 mA to 20 mA and 0 V to 10 V
  • Switching output for monitoring the maximum and minimum limit

    Your benefits

  • Non-contact and non-wearing measurement reduces maintenance and service cost
  • Sensor replacement possible even with chemicals present, thus saving time and increasing availability
  • Universally applicable with acidic and alkaline processes
  • Flexible measurement system for different container sizes provides cost reductions
  • High precision measurements, even in liquids with density fluctuations
  • Faultless operation with very limited installation space in the container
  • Switching and analog output in one sensor reduces amount of wiring, I/O and stocking costs
  • Simple and time-saving configuration with Connect+
    Features
    Средний: Fluids
    Measurement: Switch, Continuous
    Давление процесса: 0 bar ... 6 bar, gauge pressure
    Температура процесса: -25 °C ... 85 °C
    Measuring range in tank: 30 mm ... 250 mm
    Measuring range immersion tube: 30 mm ... 500 mm
    Performance
    Resolution: 0.025 mm
    Accuracy of sensor element: ≤ 1 % 1)
    Повторяемость: ± 0.15 % 2)
    Response time: ≤ 68 ms 3)
    Mechanical data
    Материал корпуса: PP, PTFE
    Process connection: D40 GF connection
    Housing design: Standard
    Electrical data
    Ultrasonic frequency: 320 kHz
    Enclosure rating: IP 67
    Supply voltage: 9 V DC ... 30 V DC 1)
    Пульсации: ± 10 %
    Потребляемая мощность: ≤ 80 mA 2)
    Time delay before availability: ≤ 300 ms
    Output signal: 1 x PNP + 4 mA ... 20 mA / 0 V ... 10 V 3)4)
    Hysteresis: 3 mm
    Сигнал Высокого напряжения: Uv - 3 V
    Тип подключения: Round connector M12 x 1, 5-pin
    Ultrasonic transducer: PTFE coating, FFKM
    Данные окуражающей среды
    Ambient operating temperature: -25 °C ... 60 °C 1)
    Температура хранения: -40 °C ... 85 °C
     
    Арт. 6050441

    At a glance

  • Ultrasonic level sensor with very high chemical resistance
  • Non-contact measurement in immersion pipe of up to 1500 mm
  • PTFE-coated membrane and GF D40 process connection made of PTFE
  • Pressure resistant up to 6 bar, temperature resistant up to 85°C
  • Different sizes available
  • Analog output selectable between 4 mA to 20 mA and 0 V to 10 V
  • Switching output for monitoring the maximum and minimum limit

    Your benefits

  • Non-contact and non-wearing measurement reduces maintenance and service cost
  • Sensor replacement possible even with chemicals present, thus saving time and increasing availability
  • Universally applicable with acidic and alkaline processes
  • Flexible measurement system for different container sizes provides cost reductions
  • High precision measurements, even in liquids with density fluctuations
  • Faultless operation with very limited installation space in the container
  • Switching and analog output in one sensor reduces amount of wiring, I/O and stocking costs
  • Simple and time-saving configuration with Connect+
    Features
    Средний: Fluids
    Measurement: Switch, Continuous
    Давление процесса: 0 bar ... 2 bar, gauge pressure for mini
    Температура процесса: -25 °C ... 85 °C
    Measuring range in tank: 30 mm ... 250 mm
    Measuring range immersion tube: 30 mm ... 500 mm
    Performance
    Resolution: 0.025 mm
    Accuracy of sensor element: ≤ 1 % 1)
    Повторяемость: ± 0.15 % 2)
    Response time: ≤ 68 ms 3)
    Mechanical data
    Материал корпуса: PP, PTFE
    Process connection: D40 GF connection
    Housing design: Mini
    Electrical data
    Ultrasonic frequency: 320 kHz
    Enclosure rating: IP 67
    Supply voltage: 9 V DC ... 30 V DC 1)
    Пульсации: ± 10 %
    Потребляемая мощность: ≤ 80 mA 2)
    Time delay before availability: ≤ 300 ms
    Output signal: 4 mA ... 20 mA 3)4)
    Hysteresis: 3 mm
    Сигнал Высокого напряжения: Uv - 3 V
    Тип подключения: Round connector M12 x 1, 5-pin
    Ultrasonic transducer: PTFE coating, FFKM
    Данные окуражающей среды
    Ambient operating temperature: -25 °C ... 60 °C 1)
    Температура хранения: -40 °C ... 85 °C
     
    Арт. 6048943

    At a glance

  • Ultrasonic level sensor with very high chemical resistance
  • Non-contact measurement in immersion pipe of up to 1500 mm
  • PTFE-coated membrane and GF D40 process connection made of PTFE
  • Pressure resistant up to 6 bar, temperature resistant up to 85°C
  • Different sizes available
  • Analog output selectable between 4 mA to 20 mA and 0 V to 10 V
  • Switching output for monitoring the maximum and minimum limit

    Your benefits

  • Non-contact and non-wearing measurement reduces maintenance and service cost
  • Sensor replacement possible even with chemicals present, thus saving time and increasing availability
  • Universally applicable with acidic and alkaline processes
  • Flexible measurement system for different container sizes provides cost reductions
  • High precision measurements, even in liquids with density fluctuations
  • Faultless operation with very limited installation space in the container
  • Switching and analog output in one sensor reduces amount of wiring, I/O and stocking costs
  • Simple and time-saving configuration with Connect+
    Features
    Средний: Fluids
    Measurement: Switch, Continuous
    Давление процесса: 0 bar ... 6 bar, gauge pressure
    Температура процесса: -25 °C ... 85 °C
    Measuring range in tank: 85 mm ... 350 mm
    Measuring range immersion tube: 85 mm ... 1,500 mm
    Performance
    Resolution: 0.18 mm
    Accuracy of sensor element: ≤ 1 % 1)
    Повторяемость: ± 0.15 % 2)
    Response time: ≤ 84 ms
    Mechanical data
    Материал корпуса: PP, PTFE
    Process connection: D40 GF connection
    Housing design: Standard
    Electrical data
    Ultrasonic frequency: 320 kHz
    Enclosure rating: IP 67
    Supply voltage: 9 V DC ... 30 V DC 1)
    Пульсации: ± 10 %
    Потребляемая мощность: ≤ 80 mA 2)
    Time delay before availability: ≤ 300 ms
    Output signal: 1 x PNP + 4 mA ... 20 mA / 0 V ... 10 V 3)4)
    Hysteresis: 5 mm
    Сигнал Высокого напряжения: Uv - 3 V
    Тип подключения: Round connector M12 x 1, 5-pin
    Ultrasonic transducer: PTFE coating, FFKM
    Данные окуражающей среды
    Ambient operating temperature: -25 °C ... 60 °C 1)
    Температура хранения: -40 °C ... 85 °C
     
    Арт. 6049945

    At a glance

  • Ultrasonic level sensor with very high chemical resistance
  • Non-contact measurement in immersion pipe of up to 1500 mm
  • PTFE-coated membrane and GF D40 process connection made of PTFE
  • Pressure resistant up to 6 bar, temperature resistant up to 85°C
  • Different sizes available
  • Analog output selectable between 4 mA to 20 mA and 0 V to 10 V
  • Switching output for monitoring the maximum and minimum limit

    Your benefits

  • Non-contact and non-wearing measurement reduces maintenance and service cost
  • Sensor replacement possible even with chemicals present, thus saving time and increasing availability
  • Universally applicable with acidic and alkaline processes
  • Flexible measurement system for different container sizes provides cost reductions
  • High precision measurements, even in liquids with density fluctuations
  • Faultless operation with very limited installation space in the container
  • Switching and analog output in one sensor reduces amount of wiring, I/O and stocking costs
  • Simple and time-saving configuration with Connect+
    Features
    Средний: Fluids
    Measurement: Switch, Continuous
    Давление процесса: 0 bar ... 2 bar, gauge pressure for mini
    Температура процесса: -25 °C ... 85 °C
    Measuring range in tank: 85 mm ... 350 mm
    Measuring range immersion tube: 85 mm ... 1,500 mm
    Performance
    Resolution: 0.18 mm
    Accuracy of sensor element: ≤ 1 % 1)
    Повторяемость: ± 0.15 % 2)
    Response time: ≤ 84 ms
    Mechanical data
    Материал корпуса: PP, PTFE
    Process connection: D40 GF connection
    Housing design: Mini
    Electrical data
    Ultrasonic frequency: 320 kHz
    Enclosure rating: IP 67
    Supply voltage: 9 V DC ... 30 V DC 1)
    Пульсации: ± 10 %
    Потребляемая мощность: ≤ 80 mA 2)
    Time delay before availability: ≤ 300 ms
    Output signal: 4 mA ... 20 mA 3)4)
    Hysteresis: 5 mm
    Тип подключения: Round connector M12 x 1, 5-pin
    Ultrasonic transducer: PTFE coating, FFKM
    Данные окуражающей среды
    Ambient operating temperature: -25 °C ... 60 °C 1)
    Температура хранения: -40 °C ... 85 °C
     
    Арт. 6049450

    At a glance

  • Ultrasonic level sensor with very high chemical resistance
  • Non-contact measurement in immersion pipe of up to 1500 mm
  • PTFE-coated membrane and GF D40 process connection made of PTFE
  • Pressure resistant up to 6 bar, temperature resistant up to 85°C
  • Different sizes available
  • Analog output selectable between 4 mA to 20 mA and 0 V to 10 V
  • Switching output for monitoring the maximum and minimum limit

    Your benefits

  • Non-contact and non-wearing measurement reduces maintenance and service cost
  • Sensor replacement possible even with chemicals present, thus saving time and increasing availability
  • Universally applicable with acidic and alkaline processes
  • Flexible measurement system for different container sizes provides cost reductions
  • High precision measurements, even in liquids with density fluctuations
  • Faultless operation with very limited installation space in the container
  • Switching and analog output in one sensor reduces amount of wiring, I/O and stocking costs
  • Simple and time-saving configuration with Connect+
    Features
    Средний: Fluids
    Measurement: Switch, Continuous
    Давление процесса: 0 bar ... 6 bar, gauge pressure
    Температура процесса: -25 °C ... 85 °C
    Measuring range in tank: 65 mm ... 700 mm
    Measuring range immersion tube: 65 mm ... 1,500 mm
    Performance
    Resolution: 0.18 mm
    Accuracy of sensor element: ≤ 1 % 1)
    Повторяемость: ± 0.15 % 2)
    Response time: ≤ 84 ms
    Mechanical data
    Материал корпуса: PP, PTFE
    Process connection: D40 GF connection
    Housing design: Standard
    Electrical data
    Ultrasonic frequency: 200 kHz
    Enclosure rating: IP 67
    Supply voltage: 9 V DC ... 30 V DC 1)
    Пульсации: ± 10 %
    Потребляемая мощность: ≤ 80 mA 2)
    Time delay before availability: ≤ 300 ms
    Output signal: 1 x PNP + 4 mA ... 20 mA / 0 V ... 10 V 3)4)
    Hysteresis: 5 mm
    Сигнал Высокого напряжения: Uv - 3 V
    Тип подключения: Round connector M12 x 1, 5-pin
    Ultrasonic transducer: PTFE coating, FFKM
    Данные окуражающей среды
    Ambient operating temperature: -25 °C ... 60 °C 1)
    Температура хранения: -40 °C ... 85 °C
     
    Арт. 6049617

    At a glance

  • Ultrasonic level sensor with very high chemical resistance
  • Non-contact measurement in immersion pipe of up to 1500 mm
  • PTFE-coated membrane and GF D40 process connection made of PTFE
  • Pressure resistant up to 6 bar, temperature resistant up to 85°C
  • Different sizes available
  • Analog output selectable between 4 mA to 20 mA and 0 V to 10 V
  • Switching output for monitoring the maximum and minimum limit

    Your benefits

  • Non-contact and non-wearing measurement reduces maintenance and service cost
  • Sensor replacement possible even with chemicals present, thus saving time and increasing availability
  • Universally applicable with acidic and alkaline processes
  • Flexible measurement system for different container sizes provides cost reductions
  • High precision measurements, even in liquids with density fluctuations
  • Faultless operation with very limited installation space in the container
  • Switching and analog output in one sensor reduces amount of wiring, I/O and stocking costs
  • Simple and time-saving configuration with Connect+
    Features
    Средний: Fluids
    Measurement: Switch, Continuous
    Давление процесса: 0 bar ... 2 bar, gauge pressure for mini
    Температура процесса: -25 °C ... 85 °C
    Measuring range in tank: 65 mm ... 700 mm
    Measuring range immersion tube: 65 mm ... 1,500 mm
    Performance
    Resolution: 0.18 mm
    Accuracy of sensor element: ≤ 1 % 1)
    Повторяемость: ± 0.15 % 2)
    Response time: ≤ 84 ms
    Mechanical data
    Материал корпуса: PP, PTFE
    Process connection: D40 GF connection
    Housing design: Mini
    Electrical data
    Ultrasonic frequency: 200 kHz
    Enclosure rating: IP 67
    Supply voltage: 9 V DC ... 30 V DC 1)
    Пульсации: ± 10 %
    Потребляемая мощность: ≤ 80 mA 2)
    Time delay before availability: ≤ 300 ms
    Output signal: 4 mA ... 20 mA 3)4)
    Hysteresis: 5 mm
    Тип подключения: Round connector M12 x 1, 5-pin
    Ultrasonic transducer: PTFE coating, FFKM
    Данные окуражающей среды
    Ambient operating temperature: -25 °C ... 60 °C 1)
    Температура хранения: -40 °C ... 85 °C
     
     

     
     
     
    Имя Отчество:
     
    Адрес электронной почты:
     
    Контактный телефон:
     
    Наименование компании:
     
    Содержание заказа: