At a glance
| Face mount flange, servo flange, blind and through hollow shaft |
| Housing unit: Ø58 mm; compact mounting depth, large bearing distance |
| Flange and stator couplings enable diverse mounting options |
| Resolution: up to 5,000 pulses |
| Cable outlet, radial M23 or M12 connector |
| TTL/RS-422 and HTL/push-pull, universal TTL/HTL interface with 4.5 V DC to 30 V DC |
| Hollow shafts: metal up to Ø5/8", insulated up to Ø15 mm; front and rear clamping |
Your benefits
| Diverse installation options due to different flange and shaft versions |
| The universal cable outlet and radial connector allow use in tight spaces and makes flexible cable routing possible |
| Compact housing dimensions save valuable space. The optional hollow shaft clamp on the back facilitates mounting. |
| Protection of the encoder against high shaft temperatures and currents through optional isolated shafts |
| Flanges and stator couplings with different mounting holes allow diverse mounting options with one encoder version |
| Rugged design with large bearing distance allows high shaft loads and a longer service life |
| The TTL/HTL combination interface enables less product variety and reduces storage costs |
| Performance | |||
| Пределы погрешности: | Measuring step deviation x 3 | ||
| Время инициализации: | 1) | ||
| Pulses per revolution: | 1,000 2) | ||
| Mechanical data | |||
| Крутящий момент на старте: | 1.2 Ncm (+20 °C) | ||
| Момент вращения: | 1.1 Ncm (+20 °C) | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Operating speed: | 6,000 /min 1) | ||
| Stator coupling: | Flange with 3 x M3 and 3 x M4 | ||
| Electrical data | |||
| Electrical interface: | 4.5 V ... 5.5 V, TTL/RS422 | ||
| Тип подключения: | Connector M23, 12-pin, radial | ||
| Номинальная потребляемая мощность (без нагрузки): | ≤ 50 mA | ||
| Short-circuit protection of the outputs: | 1 1) | ||
| Initialisation time after power on: | 2) | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -20 °C ... +85 °C 1) | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
At a glance
| Face mount flange, servo flange, blind and through hollow shaft |
| Housing unit: Ø58 mm; compact mounting depth, large bearing distance |
| Flange and stator couplings enable diverse mounting options |
| Resolution: up to 5,000 pulses |
| Cable outlet, radial M23 or M12 connector |
| TTL/RS-422 and HTL/push-pull, universal TTL/HTL interface with 4.5 V DC to 30 V DC |
| Hollow shafts: metal up to Ø5/8", insulated up to Ø15 mm; front and rear clamping |
Your benefits
| Diverse installation options due to different flange and shaft versions |
| The universal cable outlet and radial connector allow use in tight spaces and makes flexible cable routing possible |
| Compact housing dimensions save valuable space. The optional hollow shaft clamp on the back facilitates mounting. |
| Protection of the encoder against high shaft temperatures and currents through optional isolated shafts |
| Flanges and stator couplings with different mounting holes allow diverse mounting options with one encoder version |
| Rugged design with large bearing distance allows high shaft loads and a longer service life |
| The TTL/HTL combination interface enables less product variety and reduces storage costs |
| Performance | |||
| Пределы погрешности: | Measuring step deviation x 3 | ||
| Время инициализации: | 1) | ||
| Pulses per revolution: | 4,096 2) | ||
| Mechanical data | |||
| Крутящий момент на старте: | 1.2 Ncm (+20 °C) | ||
| Момент вращения: | 1.1 Ncm (+20 °C) | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Operating speed: | 6,000 /min 1) | ||
| Stator coupling: | Flange with 3 x M3 and 3 x M4 | ||
| Electrical data | |||
| Electrical interface: | 10 V ... 27 V, HTL/Push pull | ||
| Тип подключения: | Cable, 8-wire, universal, 1.5 m 1) | ||
| Short-circuit protection of the outputs: | 1 2) | ||
| Initialisation time after power on: | 3) | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -20 °C ... +85 °C 1) | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||
At a glance
| Face mount flange, servo flange, blind and through hollow shaft |
| Housing unit: Ø58 mm; compact mounting depth, large bearing distance |
| Flange and stator couplings enable diverse mounting options |
| Resolution: up to 5,000 pulses |
| Cable outlet, radial M23 or M12 connector |
| TTL/RS-422 and HTL/push-pull, universal TTL/HTL interface with 4.5 V DC to 30 V DC |
| Hollow shafts: metal up to Ø5/8", insulated up to Ø15 mm; front and rear clamping |
Your benefits
| Diverse installation options due to different flange and shaft versions |
| The universal cable outlet and radial connector allow use in tight spaces and makes flexible cable routing possible |
| Compact housing dimensions save valuable space. The optional hollow shaft clamp on the back facilitates mounting. |
| Protection of the encoder against high shaft temperatures and currents through optional isolated shafts |
| Flanges and stator couplings with different mounting holes allow diverse mounting options with one encoder version |
| Rugged design with large bearing distance allows high shaft loads and a longer service life |
| The TTL/HTL combination interface enables less product variety and reduces storage costs |
| Performance | |||
| Пределы погрешности: | Measuring step deviation x 3 | ||
| Время инициализации: | 1) | ||
| Pulses per revolution: | 2,000 2) | ||
| Mechanical data | |||
| Крутящий момент на старте: | 1.2 Ncm (+20 °C) | ||
| Момент вращения: | 1.1 Ncm (+20 °C) | ||
| Bearing lifetime: | 3.6 x 10^9 revolutions | ||
| Operating speed: | 6,000 /min 1) | ||
| Stator coupling: | Flange with 3 x M3 and 3 x M4 | ||
| Electrical data | |||
| Electrical interface: | 4.5 V ... 30 V, TTL/HTL universal | ||
| Тип подключения: | Connector M23, 12-pin, radial | ||
| Short-circuit protection of the outputs: | 1 1) | ||
| Initialisation time after power on: | 2) | ||
| Данные окуражающей среды | |||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) | ||
| Working temperature range: | -30 °C ... +100 °C, at maximum 3000 pulses per revolution, -30 °C ... +85 °C, at more than 3000 pulses per revolution 1)2) | ||
| Storage temperature range: | -40 °C ... +100 °C, without package | ||