+7 (812) 432-38-38
+7 (812) 432-36-36
Пн-Пт 9:00 — 18:00
 
Заказать оборудование
 

AFS/AFM60 SSI

 
 
 


Страницы:



Арт. AFS60B-TCPK032768

At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 32,768
    Макс. число оборотов: 1
    Разрешающая способность: 32,768 x 1
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Шаг измерения: 0.01 °
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 3/8 "
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 9,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Type of mounting shaft: Through hollow shaft
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Cable, 8-wire, universal, 1.5 m 2)
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray, programmable
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), housing side, IP 65 (according to IEC 60529), shaft side
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. AFS60B-TCPL032768

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 32,768
    Макс. число оборотов: 1
    Разрешающая способность: 32,768 x 1
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Шаг измерения: 0.01 °
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 3/8 "
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 9,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Type of mounting shaft: Through hollow shaft
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Cable, 8-wire, universal, 3 m 2)
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray, programmable
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), housing side, IP 65 (according to IEC 60529), shaft side
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. AFS60B-TCPM032768

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 32,768
    Макс. число оборотов: 1
    Разрешающая способность: 32,768 x 1
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Шаг измерения: 0.01 °
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 3/8 "
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 9,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Type of mounting shaft: Through hollow shaft
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Cable, 8-wire, universal, 5 m 2)
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray, programmable
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), housing side, IP 65 (according to IEC 60529), shaft side
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1054808

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 4,096
    Макс. число оборотов: 1
    Разрешающая способность: 4,096 x 1
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Шаг измерения: 0.01 °
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 10 mm
    Масса: 0.2 kg
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 9,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Type of mounting shaft: Through hollow shaft
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Connector M23, 12-pin, radial
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), housing side, IP 65 (according to IEC 60529), shaft side 2)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1038256

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 32,768
    Макс. число оборотов: 1
    Разрешающая способность: 32,768 x 1
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Шаг измерения: 0.01 °
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 10 mm
    Масса: 0.2 kg
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 9,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Type of mounting shaft: Through hollow shaft
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Connector M23, 12-pin, radial
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), housing side, IP 65 (according to IEC 60529), shaft side 2)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1038153

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 3,600
    Макс. число оборотов: 1
    Разрешающая способность: 3,600 x 1
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Шаг измерения: 0.01 °
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 10 mm
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 9,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Type of mounting shaft: Through hollow shaft
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Cable, 8-wire, universal, 1.5 m 2)
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), housing side, IP 65 (according to IEC 60529), shaft side
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1038182

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 18,000
    Макс. число оборотов: 1
    Разрешающая способность: 18,000 x 1
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Шаг измерения: 0.01 °
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 10 mm
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 9,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Type of mounting shaft: Through hollow shaft
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Cable, 8-wire, universal, 1.5 m 2)
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), housing side, IP 65 (according to IEC 60529), shaft side
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1051035

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 32,768
    Макс. число оборотов: 1
    Разрешающая способность: 32,768 x 1
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Шаг измерения: 0.01 °
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 10 mm
    Масса: 0.2 kg
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 9,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Type of mounting shaft: Through hollow shaft
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Connector M23, 12-pin, radial
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray, programmable
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), housing side, IP 65 (according to IEC 60529), shaft side 2)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1051069

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 32,768
    Макс. число оборотов: 1
    Разрешающая способность: 32,768 x 1
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Шаг измерения: 0.01 °
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 10 mm
    Масса: 0.2 kg
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 9,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Type of mounting shaft: Through hollow shaft
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Male connector M12, 8-pin, radial
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray, programmable
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), housing side, IP 65 (according to IEC 60529), shaft side 2)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1038262

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 18,000
    Макс. число оборотов: 1
    Разрешающая способность: 18,000 x 1
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Шаг измерения: 0.01 °
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 10 mm
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 9,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Type of mounting shaft: Through hollow shaft
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Cable, 8-wire, universal, 1.5 m 2)
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray, programmable
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), housing side, IP 65 (according to IEC 60529), shaft side
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1051051

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 32,768
    Макс. число оборотов: 1
    Разрешающая способность: 32,768 x 1
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Шаг измерения: 0.01 °
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 10 mm
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 9,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Type of mounting shaft: Through hollow shaft
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Cable, 8-wire, universal, 1.5 m 2)
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray, programmable
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), housing side, IP 65 (according to IEC 60529), shaft side
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1051074

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 32,768
    Макс. число оборотов: 1
    Разрешающая способность: 32,768 x 1
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Шаг измерения: 0.01 °
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 10 mm
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 9,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Type of mounting shaft: Through hollow shaft
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Cable, 8-wire, universal, 3 m 2)
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray, programmable
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), housing side, IP 65 (according to IEC 60529), shaft side
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1051077

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 32,768
    Макс. число оборотов: 1
    Разрешающая способность: 32,768 x 1
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Шаг измерения: 0.01 °
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 10 mm
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 9,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Type of mounting shaft: Through hollow shaft
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Cable, 8-wire, universal, 5 m 2)
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray, programmable
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), housing side, IP 65 (according to IEC 60529), shaft side
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1054112

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 8,192
    Макс. число оборотов: 1
    Разрешающая способность: 8,192 x 1
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Шаг измерения: 0.01 °
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 12 mm
    Масса: 0.2 kg
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 9,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Type of mounting shaft: Through hollow shaft
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Connector M23, 12-pin, radial
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), housing side, IP 65 (according to IEC 60529), shaft side 2)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1053469

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 32,768
    Макс. число оборотов: 1
    Разрешающая способность: 32,768 x 1
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Шаг измерения: 0.01 °
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 12 mm
    Масса: 0.2 kg
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 9,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Type of mounting shaft: Through hollow shaft
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Connector M23, 12-pin, radial
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), housing side, IP 65 (according to IEC 60529), shaft side 2)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1038267

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 8,192
    Макс. число оборотов: 1
    Разрешающая способность: 8,192 x 1
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Шаг измерения: 0.01 °
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 12 mm
    Масса: 0.2 kg
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 9,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Type of mounting shaft: Through hollow shaft
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Male connector M12, 8-pin, radial
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), housing side, IP 65 (according to IEC 60529), shaft side 2)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1051014

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 32,768
    Макс. число оборотов: 1
    Разрешающая способность: 32,768 x 1
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Шаг измерения: 0.01 °
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 12 mm
    Масса: 0.2 kg
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 9,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Type of mounting shaft: Through hollow shaft
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Male connector M12, 8-pin, radial
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), housing side, IP 65 (according to IEC 60529), shaft side 2)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1051050

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 32,768
    Макс. число оборотов: 1
    Разрешающая способность: 32,768 x 1
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Шаг измерения: 0.01 °
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 12 mm
    Масса: 0.2 kg
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 9,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Type of mounting shaft: Through hollow shaft
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Connector M23, 12-pin, radial
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray, programmable
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), housing side, IP 65 (according to IEC 60529), shaft side 2)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1037941

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 32,768
    Макс. число оборотов: 1
    Разрешающая способность: 32,768 x 1
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Шаг измерения: 0.01 °
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 12 mm
    Масса: 0.2 kg
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 9,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Type of mounting shaft: Through hollow shaft
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Male connector M12, 8-pin, radial
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray, programmable
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), housing side, IP 65 (according to IEC 60529), shaft side 2)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1051072

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 32,768
    Макс. число оборотов: 1
    Разрешающая способность: 32,768 x 1
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Шаг измерения: 0.01 °
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 12 mm
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 9,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Type of mounting shaft: Through hollow shaft
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Cable, 8-wire, universal, 1.5 m 2)
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray, programmable
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), housing side, IP 65 (according to IEC 60529), shaft side
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1051076

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 32,768
    Макс. число оборотов: 1
    Разрешающая способность: 32,768 x 1
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Шаг измерения: 0.01 °
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 12 mm
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 9,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Type of mounting shaft: Through hollow shaft
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Cable, 8-wire, universal, 3 m 2)
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray, programmable
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), housing side, IP 65 (according to IEC 60529), shaft side
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1051078

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 32,768
    Макс. число оборотов: 1
    Разрешающая способность: 32,768 x 1
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Шаг измерения: 0.01 °
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 12 mm
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 9,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Type of mounting shaft: Through hollow shaft
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Cable, 8-wire, universal, 5 m 2)
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray, programmable
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), housing side, IP 65 (according to IEC 60529), shaft side
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1053278

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 32,768
    Макс. число оборотов: 1
    Разрешающая способность: 32,768 x 1
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Шаг измерения: 0.01 °
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 1/2 "
    Масса: 0.2 kg
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 9,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Type of mounting shaft: Through hollow shaft
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Connector M23, 12-pin, radial
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), housing side, IP 65 (according to IEC 60529), shaft side 2)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1053507

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 32,768
    Макс. число оборотов: 1
    Разрешающая способность: 32,768 x 1
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Шаг измерения: 0.01 °
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 1/2 "
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 9,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Type of mounting shaft: Through hollow shaft
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Cable, 8-wire, universal, 5 m 2)
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), housing side, IP 65 (according to IEC 60529), shaft side
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. AFS60B-TFPA032768

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 32,768
    Макс. число оборотов: 1
    Разрешающая способность: 32,768 x 1
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Шаг измерения: 0.01 °
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 1/2 "
    Масса: 0.2 kg
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 9,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Type of mounting shaft: Through hollow shaft
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Connector M23, 12-pin, radial
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray, programmable
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), housing side, IP 65 (according to IEC 60529), shaft side 2)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. AFS60B-TFPC032768

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 32,768
    Макс. число оборотов: 1
    Разрешающая способность: 32,768 x 1
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Шаг измерения: 0.01 °
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 1/2 "
    Масса: 0.2 kg
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 9,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Type of mounting shaft: Through hollow shaft
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Male connector M12, 8-pin, radial
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray, programmable
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), housing side, IP 65 (according to IEC 60529), shaft side 2)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. AFS60B-TFPK032768

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 32,768
    Макс. число оборотов: 1
    Разрешающая способность: 32,768 x 1
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Шаг измерения: 0.01 °
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 1/2 "
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 9,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Type of mounting shaft: Through hollow shaft
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Cable, 8-wire, universal, 1.5 m 2)
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray, programmable
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), housing side, IP 65 (according to IEC 60529), shaft side
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. AFS60B-TFPL032768

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 32,768
    Макс. число оборотов: 1
    Разрешающая способность: 32,768 x 1
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Шаг измерения: 0.01 °
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 1/2 "
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 9,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Type of mounting shaft: Through hollow shaft
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Cable, 8-wire, universal, 3 m 2)
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray, programmable
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), housing side, IP 65 (according to IEC 60529), shaft side
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. AFS60B-TFPM032768

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 32,768
    Макс. число оборотов: 1
    Разрешающая способность: 32,768 x 1
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Шаг измерения: 0.01 °
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 1/2 "
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 9,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Type of mounting shaft: Through hollow shaft
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Cable, 8-wire, universal, 5 m 2)
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray, programmable
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), housing side, IP 65 (according to IEC 60529), shaft side
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1038945

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 8,192
    Макс. число оборотов: 1
    Разрешающая способность: 8,192 x 1
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Шаг измерения: 0.01 °
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 14 mm
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 9,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Type of mounting shaft: Through hollow shaft
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Cable, 8-wire, universal, 1.5 m 2)
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), housing side, IP 65 (according to IEC 60529), shaft side
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. AFS60B-TGPA032768

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 32,768
    Макс. число оборотов: 1
    Разрешающая способность: 32,768 x 1
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Шаг измерения: 0.01 °
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 14 mm
    Масса: 0.2 kg
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 9,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Type of mounting shaft: Through hollow shaft
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Connector M23, 12-pin, radial
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray, programmable
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), housing side, IP 65 (according to IEC 60529), shaft side 2)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. AFS60B-TGPC032768

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 32,768
    Макс. число оборотов: 1
    Разрешающая способность: 32,768 x 1
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Шаг измерения: 0.01 °
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 14 mm
    Масса: 0.2 kg
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 9,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Type of mounting shaft: Through hollow shaft
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Male connector M12, 8-pin, radial
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray, programmable
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), housing side, IP 65 (according to IEC 60529), shaft side 2)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. AFS60B-TGPK032768

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 32,768
    Макс. число оборотов: 1
    Разрешающая способность: 32,768 x 1
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Шаг измерения: 0.01 °
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 14 mm
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 9,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Type of mounting shaft: Through hollow shaft
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Cable, 8-wire, universal, 1.5 m 2)
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray, programmable
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), housing side, IP 65 (according to IEC 60529), shaft side
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. AFS60B-TGPL032768

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 32,768
    Макс. число оборотов: 1
    Разрешающая способность: 32,768 x 1
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Шаг измерения: 0.01 °
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 14 mm
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 9,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Type of mounting shaft: Through hollow shaft
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Cable, 8-wire, universal, 3 m 2)
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray, programmable
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), housing side, IP 65 (according to IEC 60529), shaft side
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. AFS60B-TGPM032768

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 32,768
    Макс. число оборотов: 1
    Разрешающая способность: 32,768 x 1
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Шаг измерения: 0.01 °
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 14 mm
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 9,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Type of mounting shaft: Through hollow shaft
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Cable, 8-wire, universal, 5 m 2)
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray, programmable
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), housing side, IP 65 (according to IEC 60529), shaft side
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1053092

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 8,192
    Макс. число оборотов: 1
    Разрешающая способность: 8,192 x 1
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Шаг измерения: 0.01 °
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 15 mm
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 9,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Type of mounting shaft: Through hollow shaft
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Cable, 8-wire, universal, 5 m 2)
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), housing side, IP 65 (according to IEC 60529), shaft side
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1052259

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 32,768
    Макс. число оборотов: 1
    Разрешающая способность: 32,768 x 1
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Шаг измерения: 0.01 °
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 15 mm
    Масса: 0.2 kg
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 9,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Type of mounting shaft: Through hollow shaft
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Connector M23, 12-pin, radial
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray, programmable
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), housing side, IP 65 (according to IEC 60529), shaft side 2)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1051522

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 32,768
    Макс. число оборотов: 1
    Разрешающая способность: 32,768 x 1
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Шаг измерения: 0.01 °
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 15 mm
    Масса: 0.2 kg
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 9,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Type of mounting shaft: Through hollow shaft
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Male connector M12, 8-pin, radial
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray, programmable
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), housing side, IP 65 (according to IEC 60529), shaft side 2)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1052297

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 32,768
    Макс. число оборотов: 1
    Разрешающая способность: 32,768 x 1
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Шаг измерения: 0.01 °
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 15 mm
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 9,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Type of mounting shaft: Through hollow shaft
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Cable, 8-wire, universal, 1.5 m 2)
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray, programmable
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), housing side, IP 65 (according to IEC 60529), shaft side
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. AFS60B-THPL032768

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 32,768
    Макс. число оборотов: 1
    Разрешающая способность: 32,768 x 1
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Шаг измерения: 0.01 °
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 15 mm
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 9,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Type of mounting shaft: Through hollow shaft
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Cable, 8-wire, universal, 3 m 2)
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray, programmable
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), housing side, IP 65 (according to IEC 60529), shaft side
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1052294

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 32,768
    Макс. число оборотов: 1
    Разрешающая способность: 32,768 x 1
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Шаг измерения: 0.01 °
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 15 mm
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 9,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Type of mounting shaft: Through hollow shaft
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Cable, 8-wire, universal, 5 m 2)
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray, programmable
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), housing side, IP 65 (according to IEC 60529), shaft side
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. AFS60B-TJPA032768

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 32,768
    Макс. число оборотов: 1
    Разрешающая способность: 32,768 x 1
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Шаг измерения: 0.01 °
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 5/8 "
    Масса: 0.2 kg
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 9,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Type of mounting shaft: Through hollow shaft
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Connector M23, 12-pin, radial
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray, programmable
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), housing side, IP 65 (according to IEC 60529), shaft side 2)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. AFS60B-TJPC032768

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 32,768
    Макс. число оборотов: 1
    Разрешающая способность: 32,768 x 1
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Шаг измерения: 0.01 °
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 5/8 "
    Масса: 0.2 kg
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 9,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Type of mounting shaft: Through hollow shaft
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Male connector M12, 8-pin, radial
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray, programmable
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), housing side, IP 65 (according to IEC 60529), shaft side 2)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. AFS60B-TJPK032768

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 32,768
    Макс. число оборотов: 1
    Разрешающая способность: 32,768 x 1
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Шаг измерения: 0.01 °
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 5/8 "
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 9,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Type of mounting shaft: Through hollow shaft
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Cable, 8-wire, universal, 1.5 m 2)
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray, programmable
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), housing side, IP 65 (according to IEC 60529), shaft side
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. AFS60B-TJPL032768

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 32,768
    Макс. число оборотов: 1
    Разрешающая способность: 32,768 x 1
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Шаг измерения: 0.01 °
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 5/8 "
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 9,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Type of mounting shaft: Through hollow shaft
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Cable, 8-wire, universal, 3 m 2)
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray, programmable
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), housing side, IP 65 (according to IEC 60529), shaft side
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. AFS60B-TJPM032768

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 32,768
    Макс. число оборотов: 1
    Разрешающая способность: 32,768 x 1
    Пределы погрешности: ± 0.05 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.01 °
    Шаг измерения: 0.01 °
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 5/8 "
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 9,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Type of mounting shaft: Through hollow shaft
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Cable, 8-wire, universal, 5 m 2)
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray, programmable
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), housing side, IP 65 (according to IEC 60529), shaft side
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 70 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1038046

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 1,024
    Макс. число оборотов: 1
    Разрешающая способность: 1,024 x 1
    Пределы погрешности: ± 0.3 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.2 °
    Шаг измерения: 0.09 ° 360 ° / number of steps
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Blind hollow shaft
    Диаметр вала: 10 mm
    Масса: 0.2 kg
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 6,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Type of mounting shaft: Blind hollow shaft
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Connector M23, 12-pin, radial
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 1 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: 0 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 50 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1037985

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 3,600
    Макс. число оборотов: 1
    Разрешающая способность: 3,600 x 1
    Пределы погрешности: ± 0.3 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.2 °
    Шаг измерения: 0.09 ° 360 ° / number of steps
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Blind hollow shaft
    Диаметр вала: 10 mm
    Масса: 0.2 kg
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 6,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Type of mounting shaft: Blind hollow shaft
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Connector M23, 12-pin, radial
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 1 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: 0 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 50 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1038040

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 4,096
    Макс. число оборотов: 1
    Разрешающая способность: 4,096 x 1
    Пределы погрешности: ± 0.3 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.2 °
    Шаг измерения: 0.09 ° 360 ° / number of steps
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Blind hollow shaft
    Диаметр вала: 10 mm
    Масса: 0.2 kg
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 6,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Type of mounting shaft: Blind hollow shaft
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Connector M23, 12-pin, radial
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 1 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: 0 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 50 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1038047

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 1,024
    Макс. число оборотов: 1
    Разрешающая способность: 1,024 x 1
    Пределы погрешности: ± 0.3 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.2 °
    Шаг измерения: 0.09 ° 360 ° / number of steps
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Blind hollow shaft
    Диаметр вала: 10 mm
    Масса: 0.2 kg
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 6,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.2 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.1 mm
    Type of mounting shaft: Blind hollow shaft
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Male connector M12, 8-pin, radial
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 1 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: 0 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 50 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
     


    Страницы:

     
     
     
    Имя Отчество:
     
    Адрес электронной почты:
     
    Контактный телефон:
     
    Наименование компании:
     
    Содержание заказа: