+7 (812) 432-38-38
+7 (812) 432-36-36
Пн-Пт 9:00 — 18:00
 
Заказать оборудование
 

AFS/AFM60 SSI

 
 
 


Страницы:



Арт. AFS60A-BFPC262144

At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 262,144
    Макс. число оборотов: 1
    Разрешающая способность: 262,144 x 1
    Пределы погрешности: ± 0.03 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.002 °
    Шаг измерения: 0.014 ° 360 ° / number of steps
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Blind hollow shaft
    Диаметр вала: 1/2 "
    Масса: 0.2 kg
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 6,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.01 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.05 mm
    Type of mounting shaft: Blind hollow shaft
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Male connector M12, 8-pin, radial
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray, programmable
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 60 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. AFS60A-BFPK262144

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 262,144
    Макс. число оборотов: 1
    Разрешающая способность: 262,144 x 1
    Пределы погрешности: ± 0.03 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.002 °
    Шаг измерения: 0.014 ° 360 ° / number of steps
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Blind hollow shaft
    Диаметр вала: 1/2 "
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 6,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.01 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.05 mm
    Type of mounting shaft: Blind hollow shaft
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Cable, 8-wire, universal, 1.5 m 2)
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray, programmable
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 60 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. AFS60A-BFPL262144

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 262,144
    Макс. число оборотов: 1
    Разрешающая способность: 262,144 x 1
    Пределы погрешности: ± 0.03 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.002 °
    Шаг измерения: 0.014 ° 360 ° / number of steps
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Blind hollow shaft
    Диаметр вала: 1/2 "
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 6,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.01 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.05 mm
    Type of mounting shaft: Blind hollow shaft
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Cable, 8-wire, universal, 3 m 2)
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray, programmable
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 60 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. AFS60A-BFPM262144

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 262,144
    Макс. число оборотов: 1
    Разрешающая способность: 262,144 x 1
    Пределы погрешности: ± 0.03 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.002 °
    Шаг измерения: 0.014 ° 360 ° / number of steps
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Blind hollow shaft
    Диаметр вала: 1/2 "
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 6,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.01 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.05 mm
    Type of mounting shaft: Blind hollow shaft
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Cable, 8-wire, universal, 5 m 2)
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray, programmable
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 60 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. AFS60A-BGPA262144

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 262,144
    Макс. число оборотов: 1
    Разрешающая способность: 262,144 x 1
    Пределы погрешности: ± 0.03 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.002 °
    Шаг измерения: 0.014 ° 360 ° / number of steps
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Blind hollow shaft
    Диаметр вала: 14 mm
    Масса: 0.2 kg
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 6,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.01 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.05 mm
    Type of mounting shaft: Blind hollow shaft
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Connector M23, 12-pin, radial
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray, programmable
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 60 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. AFS60A-BGPC262144

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 262,144
    Макс. число оборотов: 1
    Разрешающая способность: 262,144 x 1
    Пределы погрешности: ± 0.03 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.002 °
    Шаг измерения: 0.014 ° 360 ° / number of steps
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Blind hollow shaft
    Диаметр вала: 14 mm
    Масса: 0.2 kg
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 6,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.01 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.05 mm
    Type of mounting shaft: Blind hollow shaft
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Male connector M12, 8-pin, radial
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray, programmable
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 60 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. AFS60A-BGPK262144

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 262,144
    Макс. число оборотов: 1
    Разрешающая способность: 262,144 x 1
    Пределы погрешности: ± 0.03 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.002 °
    Шаг измерения: 0.014 ° 360 ° / number of steps
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Blind hollow shaft
    Диаметр вала: 14 mm
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 6,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.01 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.05 mm
    Type of mounting shaft: Blind hollow shaft
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Cable, 8-wire, universal, 1.5 m 2)
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray, programmable
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 60 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. AFS60A-BGPL262144

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 262,144
    Макс. число оборотов: 1
    Разрешающая способность: 262,144 x 1
    Пределы погрешности: ± 0.03 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.002 °
    Шаг измерения: 0.014 ° 360 ° / number of steps
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Blind hollow shaft
    Диаметр вала: 14 mm
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 6,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.01 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.05 mm
    Type of mounting shaft: Blind hollow shaft
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Cable, 8-wire, universal, 3 m 2)
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray, programmable
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 60 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. AFS60A-BGPM262144

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 262,144
    Макс. число оборотов: 1
    Разрешающая способность: 262,144 x 1
    Пределы погрешности: ± 0.03 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.002 °
    Шаг измерения: 0.014 ° 360 ° / number of steps
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Blind hollow shaft
    Диаметр вала: 14 mm
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 6,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.01 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.05 mm
    Type of mounting shaft: Blind hollow shaft
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Cable, 8-wire, universal, 5 m 2)
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray, programmable
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 60 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1050915

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 262,144
    Макс. число оборотов: 1
    Разрешающая способность: 262,144 x 1
    Пределы погрешности: ± 0.03 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.002 °
    Шаг измерения: 0.014 ° 360 ° / number of steps
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Blind hollow shaft
    Диаметр вала: 15 mm
    Масса: 0.2 kg
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 6,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.01 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.05 mm
    Type of mounting shaft: Blind hollow shaft
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Connector M23, 12-pin, radial
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 60 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1051352

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 262,144
    Макс. число оборотов: 1
    Разрешающая способность: 262,144 x 1
    Пределы погрешности: ± 0.03 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.002 °
    Шаг измерения: 0.014 ° 360 ° / number of steps
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Blind hollow shaft
    Диаметр вала: 15 mm
    Масса: 0.2 kg
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 6,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.01 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.05 mm
    Type of mounting shaft: Blind hollow shaft
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Male connector M12, 8-pin, radial
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 60 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1062089

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 262,144
    Макс. число оборотов: 1
    Разрешающая способность: 262,144 x 1
    Пределы погрешности: ± 0.03 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.002 °
    Шаг измерения: 0.014 ° 360 ° / number of steps
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Blind hollow shaft
    Диаметр вала: 15 mm
    Масса: 0.2 kg
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 6,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.01 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.05 mm
    Type of mounting shaft: Blind hollow shaft
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Connector M23, 12-pin, radial
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray, programmable
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 60 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. AFS60A-BHPC262144

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 262,144
    Макс. число оборотов: 1
    Разрешающая способность: 262,144 x 1
    Пределы погрешности: ± 0.03 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.002 °
    Шаг измерения: 0.014 ° 360 ° / number of steps
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Blind hollow shaft
    Диаметр вала: 15 mm
    Масса: 0.2 kg
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 6,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.01 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.05 mm
    Type of mounting shaft: Blind hollow shaft
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Male connector M12, 8-pin, radial
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray, programmable
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 60 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. AFS60A-BHPK262144

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 262,144
    Макс. число оборотов: 1
    Разрешающая способность: 262,144 x 1
    Пределы погрешности: ± 0.03 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.002 °
    Шаг измерения: 0.014 ° 360 ° / number of steps
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Blind hollow shaft
    Диаметр вала: 15 mm
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 6,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.01 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.05 mm
    Type of mounting shaft: Blind hollow shaft
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Cable, 8-wire, universal, 1.5 m 2)
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray, programmable
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 60 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. AFS60A-BHPL262144

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 262,144
    Макс. число оборотов: 1
    Разрешающая способность: 262,144 x 1
    Пределы погрешности: ± 0.03 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.002 °
    Шаг измерения: 0.014 ° 360 ° / number of steps
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Blind hollow shaft
    Диаметр вала: 15 mm
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 6,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.01 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.05 mm
    Type of mounting shaft: Blind hollow shaft
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Cable, 8-wire, universal, 3 m 2)
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray, programmable
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 60 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. AFS60A-BHPM262144

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 262,144
    Макс. число оборотов: 1
    Разрешающая способность: 262,144 x 1
    Пределы погрешности: ± 0.03 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.002 °
    Шаг измерения: 0.014 ° 360 ° / number of steps
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Blind hollow shaft
    Диаметр вала: 15 mm
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 6,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.01 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.05 mm
    Type of mounting shaft: Blind hollow shaft
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Cable, 8-wire, universal, 5 m 2)
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray, programmable
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 60 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1051500

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 65,536
    Макс. число оборотов: 1
    Разрешающая способность: 65,536 x 1
    Пределы погрешности: ± 0.03 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.002 °
    Шаг измерения: 0.014 ° 360 ° / number of steps
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft, Servo flange
    Диаметр вала: 6 mm
    Масса: 0.26 kg
    Крутящий момент на старте: 0.5 Ncm (20 °C)
    Момент вращения: 0.3 Ncm (20 °C)
    Permissible Load capacity of shaft: 40 N (axial), 80 N (radial)
    Maximum operating speed: 9,000 /min 1)
    Moment of inertia of the rotor: 6.2 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Type of mounting shaft: Solid shaft
    : Servo flange
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Connector M23, 12-pin, radial
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 60 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1037444

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 262,144
    Макс. число оборотов: 1
    Разрешающая способность: 262,144 x 1
    Пределы погрешности: ± 0.03 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.002 °
    Шаг измерения: 0.014 ° 360 ° / number of steps
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft, Servo flange
    Диаметр вала: 6 mm
    Масса: 0.26 kg
    Крутящий момент на старте: 0.5 Ncm (20 °C)
    Момент вращения: 0.3 Ncm (20 °C)
    Permissible Load capacity of shaft: 40 N (axial), 80 N (radial)
    Maximum operating speed: 9,000 /min 1)
    Moment of inertia of the rotor: 6.2 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Type of mounting shaft: Solid shaft
    : Servo flange
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Connector M23, 12-pin, radial
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 60 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1037445

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 262,144
    Макс. число оборотов: 1
    Разрешающая способность: 262,144 x 1
    Пределы погрешности: ± 0.03 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.002 °
    Шаг измерения: 0.014 ° 360 ° / number of steps
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft, Servo flange
    Диаметр вала: 6 mm
    Масса: 0.26 kg
    Крутящий момент на старте: 0.5 Ncm (20 °C)
    Момент вращения: 0.3 Ncm (20 °C)
    Permissible Load capacity of shaft: 40 N (axial), 80 N (radial)
    Maximum operating speed: 9,000 /min 1)
    Moment of inertia of the rotor: 6.2 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Type of mounting shaft: Solid shaft
    : Servo flange
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Male connector M12, 8-pin, radial
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 60 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1037446

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 262,144
    Макс. число оборотов: 1
    Разрешающая способность: 262,144 x 1
    Пределы погрешности: ± 0.03 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.002 °
    Шаг измерения: 0.014 ° 360 ° / number of steps
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft, Servo flange
    Диаметр вала: 6 mm
    Крутящий момент на старте: 0.5 Ncm (20 °C)
    Момент вращения: 0.3 Ncm (20 °C)
    Permissible Load capacity of shaft: 40 N (axial), 80 N (radial)
    Maximum operating speed: 9,000 /min 1)
    Moment of inertia of the rotor: 6.2 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Type of mounting shaft: Solid shaft
    : Servo flange
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Cable, 8-wire, universal, 1.5 m 2)
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 60 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1037645

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 262,144
    Макс. число оборотов: 1
    Разрешающая способность: 262,144 x 1
    Пределы погрешности: ± 0.03 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.002 °
    Шаг измерения: 0.014 ° 360 ° / number of steps
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft, Servo flange
    Диаметр вала: 6 mm
    Крутящий момент на старте: 0.5 Ncm (20 °C)
    Момент вращения: 0.3 Ncm (20 °C)
    Permissible Load capacity of shaft: 40 N (axial), 80 N (radial)
    Maximum operating speed: 9,000 /min 1)
    Moment of inertia of the rotor: 6.2 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Type of mounting shaft: Solid shaft
    : Servo flange
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Cable, 8-wire, universal, 3 m 2)
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 60 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1052349

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 65,536
    Макс. число оборотов: 1
    Разрешающая способность: 65,536 x 1
    Пределы погрешности: ± 0.03 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.002 °
    Шаг измерения: 0.014 ° 360 ° / number of steps
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft, Servo flange
    Диаметр вала: 6 mm
    Крутящий момент на старте: 0.5 Ncm (20 °C)
    Момент вращения: 0.3 Ncm (20 °C)
    Permissible Load capacity of shaft: 40 N (axial), 80 N (radial)
    Maximum operating speed: 9,000 /min 1)
    Moment of inertia of the rotor: 6.2 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Type of mounting shaft: Solid shaft
    : Servo flange
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Cable, 8-wire, universal, 5 m 2)
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 60 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1037646

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 262,144
    Макс. число оборотов: 1
    Разрешающая способность: 262,144 x 1
    Пределы погрешности: ± 0.03 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.002 °
    Шаг измерения: 0.014 ° 360 ° / number of steps
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft, Servo flange
    Диаметр вала: 6 mm
    Крутящий момент на старте: 0.5 Ncm (20 °C)
    Момент вращения: 0.3 Ncm (20 °C)
    Permissible Load capacity of shaft: 40 N (axial), 80 N (radial)
    Maximum operating speed: 9,000 /min 1)
    Moment of inertia of the rotor: 6.2 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Type of mounting shaft: Solid shaft
    : Servo flange
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Cable, 8-wire, universal, 5 m 2)
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 60 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1037498

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 262,144
    Макс. число оборотов: 1
    Разрешающая способность: 262,144 x 1
    Пределы погрешности: ± 0.03 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.002 °
    Шаг измерения: 0.014 ° 360 ° / number of steps
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft, Servo flange
    Диаметр вала: 6 mm
    Масса: 0.26 kg
    Крутящий момент на старте: 0.5 Ncm (20 °C)
    Момент вращения: 0.3 Ncm (20 °C)
    Permissible Load capacity of shaft: 40 N (axial), 80 N (radial)
    Maximum operating speed: 9,000 /min 1)
    Moment of inertia of the rotor: 6.2 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Type of mounting shaft: Solid shaft
    : Servo flange
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Connector M23, 12-pin, radial
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray, programmable
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 60 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1037499

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 262,144
    Макс. число оборотов: 1
    Разрешающая способность: 262,144 x 1
    Пределы погрешности: ± 0.03 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.002 °
    Шаг измерения: 0.014 ° 360 ° / number of steps
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft, Servo flange
    Диаметр вала: 6 mm
    Масса: 0.26 kg
    Крутящий момент на старте: 0.5 Ncm (20 °C)
    Момент вращения: 0.3 Ncm (20 °C)
    Permissible Load capacity of shaft: 40 N (axial), 80 N (radial)
    Maximum operating speed: 9,000 /min 1)
    Moment of inertia of the rotor: 6.2 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Type of mounting shaft: Solid shaft
    : Servo flange
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Male connector M12, 8-pin, radial
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray, programmable
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 60 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1037500

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 262,144
    Макс. число оборотов: 1
    Разрешающая способность: 262,144 x 1
    Пределы погрешности: ± 0.03 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.002 °
    Шаг измерения: 0.014 ° 360 ° / number of steps
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft, Servo flange
    Диаметр вала: 6 mm
    Крутящий момент на старте: 0.5 Ncm (20 °C)
    Момент вращения: 0.3 Ncm (20 °C)
    Permissible Load capacity of shaft: 40 N (axial), 80 N (radial)
    Maximum operating speed: 9,000 /min 1)
    Moment of inertia of the rotor: 6.2 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Type of mounting shaft: Solid shaft
    : Servo flange
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Cable, 8-wire, universal, 1.5 m 2)
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray, programmable
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 60 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1037501

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 262,144
    Макс. число оборотов: 1
    Разрешающая способность: 262,144 x 1
    Пределы погрешности: ± 0.03 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.002 °
    Шаг измерения: 0.014 ° 360 ° / number of steps
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft, Servo flange
    Диаметр вала: 6 mm
    Крутящий момент на старте: 0.5 Ncm (20 °C)
    Момент вращения: 0.3 Ncm (20 °C)
    Permissible Load capacity of shaft: 40 N (axial), 80 N (radial)
    Maximum operating speed: 9,000 /min 1)
    Moment of inertia of the rotor: 6.2 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Type of mounting shaft: Solid shaft
    : Servo flange
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Cable, 8-wire, universal, 3 m 2)
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray, programmable
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 60 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1037502

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 262,144
    Макс. число оборотов: 1
    Разрешающая способность: 262,144 x 1
    Пределы погрешности: ± 0.03 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.002 °
    Шаг измерения: 0.014 ° 360 ° / number of steps
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft, Servo flange
    Диаметр вала: 6 mm
    Крутящий момент на старте: 0.5 Ncm (20 °C)
    Момент вращения: 0.3 Ncm (20 °C)
    Permissible Load capacity of shaft: 40 N (axial), 80 N (radial)
    Maximum operating speed: 9,000 /min 1)
    Moment of inertia of the rotor: 6.2 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Type of mounting shaft: Solid shaft
    : Servo flange
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Cable, 8-wire, universal, 5 m 2)
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray, programmable
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 60 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1052247

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 1,024
    Макс. число оборотов: 1
    Разрешающая способность: 1,024 x 1
    Пределы погрешности: ± 0.03 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.008 °
    Шаг измерения: 0.014 ° 360 ° / number of steps
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft with flat, Face mount flange
    Диаметр вала: 10 mm
    Масса: 0.26 kg
    Крутящий момент на старте: 0.5 Ncm (20 °C)
    Момент вращения: 0.3 Ncm (20 °C)
    Permissible Load capacity of shaft: 40 N (axial), 80 N (radial)
    Maximum operating speed: 9,000 /min 1)
    Moment of inertia of the rotor: 6.2 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Type of mounting shaft: Solid shaft with flat
    : Face mount flange
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Connector M23, 12-pin, radial
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 60 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1053807

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 8,192
    Макс. число оборотов: 1
    Разрешающая способность: 8,192 x 1
    Пределы погрешности: ± 0.03 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.008 °
    Шаг измерения: 0.014 ° 360 ° / number of steps
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft with flat, Face mount flange
    Диаметр вала: 10 mm
    Масса: 0.26 kg
    Крутящий момент на старте: 0.5 Ncm (20 °C)
    Момент вращения: 0.3 Ncm (20 °C)
    Permissible Load capacity of shaft: 40 N (axial), 80 N (radial)
    Maximum operating speed: 9,000 /min 1)
    Moment of inertia of the rotor: 6.2 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Type of mounting shaft: Solid shaft with flat
    : Face mount flange
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Connector M23, 12-pin, radial
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 60 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1037914

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 65,536
    Макс. число оборотов: 1
    Разрешающая способность: 65,536 x 1
    Пределы погрешности: ± 0.03 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.002 °
    Шаг измерения: 0.014 ° 360 ° / number of steps
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft with flat, Face mount flange
    Диаметр вала: 10 mm
    Масса: 0.26 kg
    Крутящий момент на старте: 0.5 Ncm (20 °C)
    Момент вращения: 0.3 Ncm (20 °C)
    Permissible Load capacity of shaft: 40 N (axial), 80 N (radial)
    Maximum operating speed: 9,000 /min 1)
    Moment of inertia of the rotor: 6.2 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Type of mounting shaft: Solid shaft with flat
    : Face mount flange
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Connector M23, 12-pin, radial
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 60 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1054929

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 131,072
    Макс. число оборотов: 1
    Разрешающая способность: 131,072 x 1
    Пределы погрешности: ± 0.03 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.002 °
    Шаг измерения: 0.014 ° 360 ° / number of steps
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft with flat, Face mount flange
    Диаметр вала: 10 mm
    Масса: 0.26 kg
    Крутящий момент на старте: 0.5 Ncm (20 °C)
    Момент вращения: 0.3 Ncm (20 °C)
    Permissible Load capacity of shaft: 40 N (axial), 80 N (radial)
    Maximum operating speed: 9,000 /min 1)
    Moment of inertia of the rotor: 6.2 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Type of mounting shaft: Solid shaft with flat
    : Face mount flange
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Connector M23, 12-pin, radial
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 60 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1037441

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 262,144
    Макс. число оборотов: 1
    Разрешающая способность: 262,144 x 1
    Пределы погрешности: ± 0.03 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.002 °
    Шаг измерения: 0.014 ° 360 ° / number of steps
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft with flat, Face mount flange
    Диаметр вала: 10 mm
    Масса: 0.26 kg
    Крутящий момент на старте: 0.5 Ncm (20 °C)
    Момент вращения: 0.3 Ncm (20 °C)
    Permissible Load capacity of shaft: 40 N (axial), 80 N (radial)
    Maximum operating speed: 9,000 /min 1)
    Moment of inertia of the rotor: 6.2 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Type of mounting shaft: Solid shaft with flat
    : Face mount flange
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Connector M23, 12-pin, radial
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 60 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1053457

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 16,384
    Макс. число оборотов: 1
    Разрешающая способность: 16,384 x 1
    Пределы погрешности: ± 0.03 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.008 °
    Шаг измерения: 0.014 ° 360 ° / number of steps
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft with flat, Face mount flange
    Диаметр вала: 10 mm
    Масса: 0.26 kg
    Крутящий момент на старте: 0.5 Ncm (20 °C)
    Момент вращения: 0.3 Ncm (20 °C)
    Permissible Load capacity of shaft: 40 N (axial), 80 N (radial)
    Maximum operating speed: 9,000 /min 1)
    Moment of inertia of the rotor: 6.2 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Type of mounting shaft: Solid shaft with flat
    : Face mount flange
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Male connector M12, 8-pin, radial
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 60 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1038900

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 65,536
    Макс. число оборотов: 1
    Разрешающая способность: 65,536 x 1
    Пределы погрешности: ± 0.03 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.002 °
    Шаг измерения: 0.014 ° 360 ° / number of steps
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft with flat, Face mount flange
    Диаметр вала: 10 mm
    Масса: 0.26 kg
    Крутящий момент на старте: 0.5 Ncm (20 °C)
    Момент вращения: 0.3 Ncm (20 °C)
    Permissible Load capacity of shaft: 40 N (axial), 80 N (radial)
    Maximum operating speed: 9,000 /min 1)
    Moment of inertia of the rotor: 6.2 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Type of mounting shaft: Solid shaft with flat
    : Face mount flange
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Male connector M12, 8-pin, radial
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 60 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1037749

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 131,072
    Макс. число оборотов: 1
    Разрешающая способность: 131,072 x 1
    Пределы погрешности: ± 0.03 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.002 °
    Шаг измерения: 0.014 ° 360 ° / number of steps
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft with flat, Face mount flange
    Диаметр вала: 10 mm
    Масса: 0.26 kg
    Крутящий момент на старте: 0.5 Ncm (20 °C)
    Момент вращения: 0.3 Ncm (20 °C)
    Permissible Load capacity of shaft: 40 N (axial), 80 N (radial)
    Maximum operating speed: 9,000 /min 1)
    Moment of inertia of the rotor: 6.2 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Type of mounting shaft: Solid shaft with flat
    : Face mount flange
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Male connector M12, 8-pin, radial
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 60 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1037442

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 262,144
    Макс. число оборотов: 1
    Разрешающая способность: 262,144 x 1
    Пределы погрешности: ± 0.03 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.002 °
    Шаг измерения: 0.014 ° 360 ° / number of steps
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft with flat, Face mount flange
    Диаметр вала: 10 mm
    Масса: 0.26 kg
    Крутящий момент на старте: 0.5 Ncm (20 °C)
    Момент вращения: 0.3 Ncm (20 °C)
    Permissible Load capacity of shaft: 40 N (axial), 80 N (radial)
    Maximum operating speed: 9,000 /min 1)
    Moment of inertia of the rotor: 6.2 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Type of mounting shaft: Solid shaft with flat
    : Face mount flange
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Male connector M12, 8-pin, radial
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 60 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1037979

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 65,536
    Макс. число оборотов: 1
    Разрешающая способность: 65,536 x 1
    Пределы погрешности: ± 0.03 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.002 °
    Шаг измерения: 0.014 ° 360 ° / number of steps
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft with flat, Face mount flange
    Диаметр вала: 10 mm
    Крутящий момент на старте: 0.5 Ncm (20 °C)
    Момент вращения: 0.3 Ncm (20 °C)
    Permissible Load capacity of shaft: 40 N (axial), 80 N (radial)
    Maximum operating speed: 9,000 /min 1)
    Moment of inertia of the rotor: 6.2 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Type of mounting shaft: Solid shaft with flat
    : Face mount flange
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Cable, 8-wire, universal, 1.5 m 2)
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 60 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1037443

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 262,144
    Макс. число оборотов: 1
    Разрешающая способность: 262,144 x 1
    Пределы погрешности: ± 0.03 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.002 °
    Шаг измерения: 0.014 ° 360 ° / number of steps
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft with flat, Face mount flange
    Диаметр вала: 10 mm
    Крутящий момент на старте: 0.5 Ncm (20 °C)
    Момент вращения: 0.3 Ncm (20 °C)
    Permissible Load capacity of shaft: 40 N (axial), 80 N (radial)
    Maximum operating speed: 9,000 /min 1)
    Moment of inertia of the rotor: 6.2 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Type of mounting shaft: Solid shaft with flat
    : Face mount flange
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Cable, 8-wire, universal, 1.5 m 2)
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 60 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1038172

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 65,536
    Макс. число оборотов: 1
    Разрешающая способность: 65,536 x 1
    Пределы погрешности: ± 0.03 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.002 °
    Шаг измерения: 0.014 ° 360 ° / number of steps
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft with flat, Face mount flange
    Диаметр вала: 10 mm
    Крутящий момент на старте: 0.5 Ncm (20 °C)
    Момент вращения: 0.3 Ncm (20 °C)
    Permissible Load capacity of shaft: 40 N (axial), 80 N (radial)
    Maximum operating speed: 9,000 /min 1)
    Moment of inertia of the rotor: 6.2 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Type of mounting shaft: Solid shaft with flat
    : Face mount flange
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Cable, 8-wire, universal, 3 m 2)
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 60 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1037647

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 262,144
    Макс. число оборотов: 1
    Разрешающая способность: 262,144 x 1
    Пределы погрешности: ± 0.03 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.002 °
    Шаг измерения: 0.014 ° 360 ° / number of steps
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft with flat, Face mount flange
    Диаметр вала: 10 mm
    Крутящий момент на старте: 0.5 Ncm (20 °C)
    Момент вращения: 0.3 Ncm (20 °C)
    Permissible Load capacity of shaft: 40 N (axial), 80 N (radial)
    Maximum operating speed: 9,000 /min 1)
    Moment of inertia of the rotor: 6.2 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Type of mounting shaft: Solid shaft with flat
    : Face mount flange
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Cable, 8-wire, universal, 3 m 2)
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 60 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1037648

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 262,144
    Макс. число оборотов: 1
    Разрешающая способность: 262,144 x 1
    Пределы погрешности: ± 0.03 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.002 °
    Шаг измерения: 0.014 ° 360 ° / number of steps
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft with flat, Face mount flange
    Диаметр вала: 10 mm
    Крутящий момент на старте: 0.5 Ncm (20 °C)
    Момент вращения: 0.3 Ncm (20 °C)
    Permissible Load capacity of shaft: 40 N (axial), 80 N (radial)
    Maximum operating speed: 9,000 /min 1)
    Moment of inertia of the rotor: 6.2 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Type of mounting shaft: Solid shaft with flat
    : Face mount flange
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Cable, 8-wire, universal, 5 m 2)
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 60 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1037488

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 262,144
    Макс. число оборотов: 1
    Разрешающая способность: 262,144 x 1
    Пределы погрешности: ± 0.03 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.002 °
    Шаг измерения: 0.014 ° 360 ° / number of steps
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft with flat, Face mount flange
    Диаметр вала: 10 mm
    Масса: 0.26 kg
    Крутящий момент на старте: 0.5 Ncm (20 °C)
    Момент вращения: 0.3 Ncm (20 °C)
    Permissible Load capacity of shaft: 40 N (axial), 80 N (radial)
    Maximum operating speed: 9,000 /min 1)
    Moment of inertia of the rotor: 6.2 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Type of mounting shaft: Solid shaft with flat
    : Face mount flange
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Connector M23, 12-pin, radial
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray, programmable
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 60 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1037489

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 262,144
    Макс. число оборотов: 1
    Разрешающая способность: 262,144 x 1
    Пределы погрешности: ± 0.03 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.002 °
    Шаг измерения: 0.014 ° 360 ° / number of steps
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft with flat, Face mount flange
    Диаметр вала: 10 mm
    Масса: 0.26 kg
    Крутящий момент на старте: 0.5 Ncm (20 °C)
    Момент вращения: 0.3 Ncm (20 °C)
    Permissible Load capacity of shaft: 40 N (axial), 80 N (radial)
    Maximum operating speed: 9,000 /min 1)
    Moment of inertia of the rotor: 6.2 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Type of mounting shaft: Solid shaft with flat
    : Face mount flange
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Male connector M12, 8-pin, radial
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray, programmable
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side 2)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 60 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1037490

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 262,144
    Макс. число оборотов: 1
    Разрешающая способность: 262,144 x 1
    Пределы погрешности: ± 0.03 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.002 °
    Шаг измерения: 0.014 ° 360 ° / number of steps
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft with flat, Face mount flange
    Диаметр вала: 10 mm
    Крутящий момент на старте: 0.5 Ncm (20 °C)
    Момент вращения: 0.3 Ncm (20 °C)
    Permissible Load capacity of shaft: 40 N (axial), 80 N (radial)
    Maximum operating speed: 9,000 /min 1)
    Moment of inertia of the rotor: 6.2 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Type of mounting shaft: Solid shaft with flat
    : Face mount flange
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Cable, 8-wire, universal, 1.5 m 2)
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray, programmable
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 60 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1037491

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 262,144
    Макс. число оборотов: 1
    Разрешающая способность: 262,144 x 1
    Пределы погрешности: ± 0.03 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.002 °
    Шаг измерения: 0.014 ° 360 ° / number of steps
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft with flat, Face mount flange
    Диаметр вала: 10 mm
    Крутящий момент на старте: 0.5 Ncm (20 °C)
    Момент вращения: 0.3 Ncm (20 °C)
    Permissible Load capacity of shaft: 40 N (axial), 80 N (radial)
    Maximum operating speed: 9,000 /min 1)
    Moment of inertia of the rotor: 6.2 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Type of mounting shaft: Solid shaft with flat
    : Face mount flange
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Cable, 8-wire, universal, 3 m 2)
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray, programmable
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 60 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. 1037492

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 262,144
    Макс. число оборотов: 1
    Разрешающая способность: 262,144 x 1
    Пределы погрешности: ± 0.03 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.002 °
    Шаг измерения: 0.014 ° 360 ° / number of steps
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft with flat, Face mount flange
    Диаметр вала: 10 mm
    Крутящий момент на старте: 0.5 Ncm (20 °C)
    Момент вращения: 0.3 Ncm (20 °C)
    Permissible Load capacity of shaft: 40 N (axial), 80 N (radial)
    Maximum operating speed: 9,000 /min 1)
    Moment of inertia of the rotor: 6.2 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Type of mounting shaft: Solid shaft with flat
    : Face mount flange
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Cable, 8-wire, universal, 5 m 2)
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray, programmable
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 60 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. AFS60A-TBPA262144

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 262,144
    Макс. число оборотов: 1
    Разрешающая способность: 262,144 x 1
    Пределы погрешности: ± 0.03 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.002 °
    Шаг измерения: 0.014 ° 360 ° / number of steps
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 8 mm
    Масса: 0.2 kg
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 9,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.01 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.05 mm
    Type of mounting shaft: Through hollow shaft
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Connector M23, 12-pin, radial
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray, programmable
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), housing side, IP 65 (according to IEC 60529), shaft side 2)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 60 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. AFS60A-TBPC262144

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 262,144
    Макс. число оборотов: 1
    Разрешающая способность: 262,144 x 1
    Пределы погрешности: ± 0.03 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.002 °
    Шаг измерения: 0.014 ° 360 ° / number of steps
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 8 mm
    Масса: 0.2 kg
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 9,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.01 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.05 mm
    Type of mounting shaft: Through hollow shaft
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Male connector M12, 8-pin, radial
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray, programmable
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), housing side, IP 65 (according to IEC 60529), shaft side 2)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 60 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    Арт. AFS60A-TBPK262144

    At a glance

  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
  • Programmable resolution and offset (dependent on type)
  • Connection system: M12, M23 connector or cable outlet
  • Enclosure rating: IP 67 (housing), IP 65 (shaft)
  • Operating temperature: -30 °C to +100 °C (depends on type)

    Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60
    Performance
    Max. number of steps per revolution: 262,144
    Макс. число оборотов: 1
    Разрешающая способность: 262,144 x 1
    Пределы погрешности: ± 0.03 °
    Repeatability (Ta not constant): 0.002 °
    Measuring step deviation: ± 0.002 °
    Шаг измерения: 0.014 ° 360 ° / number of steps
    Время инициализации: 50 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 8 mm
    Крутящий момент на старте: 0.8 Ncm (20 °C)
    Момент вращения: 0.6 Ncm (20 °C)
    Maximum operating speed: 9,000 /min 1)
    Moment of inertia of the rotor: 40 gcm²
    Bearing lifetime: 3.0 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Допустимые осевое движение статическая/динамическая: ± 0.5 mm, ± 0.01 mm
    Допустимое радиальное движение статический/динамический: ± 0.3 mm, ± 0.05 mm
    Type of mounting shaft: Through hollow shaft
    Electrical data
    Потребляемая мощность: 0.5 W (without load)
    Диапазон рабочего напряжения: 4.5 V DC ... 32 V DC
    MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
    Тип подключения: Cable, 8-wire, universal, 1.5 m 2)
    Code type: Gray
    Кодовая последовательность: CW/CCW, parameter adjustable
    Защита от обратной полярности: 1
    Interfaces
    Electrical interface: SSI/Gray, programmable
    Interface signals: Clock +, Clock -, Data +, Data-
    Clock frequency: 2 MHz 1)
    SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), housing side, IP 65 (according to IEC 60529), shaft side
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -30 °C ... 100 °C
    Storage temperature range: -40 °C ... 100 °C, without package
    Устойчивость к ударам: 60 g, 6 ms (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
     


    Страницы:

     
     
     
    Имя Отчество:
     
    Адрес электронной почты:
     
    Контактный телефон:
     
    Наименование компании:
     
    Содержание заказа: