The MCS100E CD is an analyzer system for extractive measurement of up to 8 IR-active gas compounds. It can be supplemented with an oxygen sensor. The gas is dried by an integrated gas cooler allowing measurement of very small measuring ranges, especially for SO2, NO and NO2.
At a glance
| Extractive measurement of up to 8 IR-active gas compounds |
| Optional oxygen sensor available |
| Integrated gas cooler |
| Test gas supply at the gas sampling probe or at the analyzer |
| Back-purging of gas sampling probe for cleaning of filters |
| Fast sample gas exchange for minimizing adsorption and desorption effects |
| Automated sample point switching |
Your benefits
| Especially low measurement ranges for SO2, NO, NO2 |
| Selective measurement of NO and NO2 - no converter required |
| Measurement of several gas components with one analyzer |
Fields of application
| Flue gas monitoring in power stations |
| Monitoring of combustion plants |
| Emission monitoring in industrial plants |
| Technical data | |||
| Analyzer: | MCS100E | ||
| Measurement principles: | Gas filter correlation, Interference filter correlation, Zirconium dioxide sensor | ||
| Measured values: | CH4, CO, CO2, H2O, N2O, NO, NO2, O2, SO2 | ||
| Max. number of measurands: | 8 | ||
| Measuring ranges: | CH4: 0 ... 140 ppm / 0 ... 1,400 ppm CO: 0 ... 40 ppm / 0 ... 2,000 ppm CO2: 0 ... 25 Vol.-% / 0 ... 100 Vol.-% H2O: 0 ... 1 Vol.-% / 0 ... 5 Vol.-% N2O: 0 ... 50 ppm / 0 ... 1,000 ppm NO: 0 ... 40 ppm / 0 ... 1,900 ppm NO2: 0 ... 40 ppm / 0 ... 500 ppm O2: 0 ... 1 Vol.-% / 0 ... 21 Vol.-% SO2: 0 ... 4 ppm / 0 ... 5,000 ppm |
||
| Comment: | Other measuring ranges and components on request, Measuring ranges depend on application and device version | ||
| Gas flow rate: | 200 ... 1,000 l/h depending on application |
||
| Температура процесса: | Inlet analyzer system: 0 ... +220 °C Process: 0 ... +1,300 °C |
||
| Давление процесса: | 900 ... 1,100 hPa atmospheric |
||
| Ambient temperature: | +5 ... +35 °C With cooling device: +5 ... +50 °C |
||
| Ambient pressure: | 900 ... 1,100 hPa | ||
| Conformities: | GOST MCERTS |
||
| Electrical safety: | CE | ||
| Enclosure rating: | IP 43 | ||
| Analog outputs: | 4 outputs: 0/4 ... 20 mA, 500 Ω max. 64 outputs with opto box via optical fibre possible |
||
| Analog inputs: | 4 inputs: 0/4 ... 20 mA max. 64 inputs with opto box via optical fibre possible |
||
| Digital outputs: | 12 outputs: 40 V, 1 A max. 64 outputs with opto box via optical fibre possible |
||
| Digital inputs: | 4 inputs: 50 V AC, 4 A 24 V DC, 4 A max. 64 inputs with opto box via optical fibre possible |
||
| Interfaces: | Modem, analog additional interfaces on request RS-232 RS-485 |
||
| Bus protocol: | Modbus additional buses on request |
||
| Operation: | Sequence programs can be programmed as required, Via integrated operating unit, Two operating levels, one password-protected | ||
| System components: | MCS100E analyzer Analyzer cabinet Sampling probe Sample gas cooler Sample gas line Sample gas pump |
||
| Test functions: | Automatic check cycle for zero and span point Internal calibration filter for QAL3 drift check without test gas (option) |
||