+7 (812) 432-38-38
+7 (812) 432-36-36
Пн-Пт 9:00 — 18:00
 
Заказать оборудование
 

E-Stop & Guard Monitoring Modules

 
 

  • Modules monitor up to 10 external devices for contact failure or wiring faults.
  • Module goes into lockout mode if it detects a fault.
  • Available voltages include 24V dc; 24V ac/dc; 115V ac or 12 to 24V dc; or 230V ac or 12 to 24V ac/dc.
  • Modules monitor positive-opening E-stop and interlock switches.
  • Models are available with 2 to 4 normally open safety outputs, depending on module.
  • Safety outputs are rated 4 or 6 amps, depending on module.
  • Non-safety auxiliary outputs are available on most modules.
  • Modules are available with an adjustable output delay of 0-20 or 0-200 seconds, depending on module.
  • Two modules allow central monitoring and control over a DeviceNet control network.
  • Ratings are NEMA 1 and at least IEC IP20.
  • Housings are rugged polycarbonate.
  • Bright red and green LED indicators show module's operating status.
*DeviceNet­ is a trademark of Open DeviceNet Vendor Association, Inc.
 

  • Monitors external safety devices for contact failure or wiring fault
  • Offers 24V ac/dc supply voltage
  • Provides three normally open (NO) immediate safety outputs rated at 6 amps
  • Includes one normally closed (NC) non-safety auxiliary outputs
  • Resets automatically or manually
  • Features a 35 millisecond response time
  • Meets US and international standards
  • Rated IEC IP40; NEMA 1
 

  • Monitors external safety devices for contact failure or wiring fault
  • Offers 24V ac/dc supply voltage
  • Provides choice of models with two or three normally open (NO) immediate safety outputs
  • Features model with one normally closed (NC) non-safety auxiliary output
  • Includes 6 amp rating of safety outputs
  • Features removable terminal blocks
  • Provides automatic or manual reset
  • Responds in 25 milliseconds
  • Meets US and international standards
  • Rated IEC IP40; NEMA 1
 

  • Monitors external safety devices for contact failure or wiring fault
  • Offers choice of 115V ac/12 to 24V dc or 230V ac/12 to 24V dc supply voltage, depending on model
  • Provides four normally open (NO) immediate safety outputs rated at 6 amps
  • Includes one normally closed (NC) and two solid-state non-safety auxiliary outputs
  • Features removable terminal blocks
  • Resets automatically or manually
  • Responds in 25 milliseconds
  • Meet US and international standards
  • Rated IEC IP20; NEMA 1
 

  • Monitors magnetic and mechanical safety switches for contact failure or wiring fault
  • Offers 24V ac/dc supply voltage with 2 normally open (NO) immediate safety outputs
  • Features 6 amp rating of safety outputs
  • Offers removable terminal blocks
  • Resets automatically or manually
  • Responds in 35 milliseconds
  • Meets US and international standards
  • Rated IEC IP40; NEMA 1
 
 

 
 
 
Имя Отчество:
 
Адрес электронной почты:
 
Контактный телефон:
 
Наименование компании:
 
Содержание заказа: