Patented 30 mm mounting base enables easy installation and hookup with no assembly, individual wiring or additional enclosure required.
- Available with two-color: yellow and red, one color: red, or a non-illuminated black base
- Reduces intensive labor costs with a fully enclosed E-Stop button ready for installation
- Multiple buttons can be wired in series, with built-in logic allowing for clear indication of pushed button
- Latching design complies with ISO 13850; direct (positive) opening operation per IEC 60947-5-1
- Rugged design rated to IP65
- Available with illuminated Safety BUS Gateway compatibility
The easy to install Flush Mount E-stops are available in four model styles: standard actuator, illuminated standard actuator, lockable actuator, and an illuminated lockable actuator.
- Available with two-color: yellow (or green) and red; one color: red; or a non-illuminated black base
- Rugged design rated to IP65
- Available with illuminated Safety BUS Gateway compatibility
- Latching design complies with ISO 13850; direct (positive) opening operation per IEC 60947-5-1
- Safe Break Action ensures NC contacts will open if the contact block is separated from the actuator
- Multiple buttons can be interfaced and series connected with CSS Series Hookup Cordsets
- Compliant with ANSI B11.19, ANSI NFPA79, and IEC/EN 60204-1 Emergency Stop requirements
- Mechanical palm buttons push to stop and twist to release.
- Modular design makes assembly and installation easy.
- Metal or plastic buttons are available.
- Normally closed (NC) positively driven or normally open (NO) auxiliary contact elements are available.
- Kits simplify selection and ordering.
- Latching design complies with ISO 13850 (EN 418).
- Options include station enclosures, contact elements and disc labels.
Electro-Mechanical 30 mm E-Stop Push Buttons
- Four styles of actuators: standard, illuminated, lockable, and illuminated lockable
- Push-to-stop, twist-to-release (standard and lockable), or pull-to-release (standard)
- operation per IEC60947-5-5
- Latching design complies with ISO 13850; direct (positive) opening operation per IEC 60947-5-1
- Compliant with ANSI B11.19, ANSI NFPA79, and IEC/EN 60204-1 Emergency Stop requirements
- “Safe Break Action” ensures N.C. contacts will open if the contact block is separated from the actuator
- Panel mount though 30 mm mounting hole